My web service works fine on my local machine but when i put it on the server it throw this error:
Parser Error Message: Could not create type 'Service'.
I don't know how to fix this.
I have deployed my webservice in server it shows the error like "Parser Error Message: Could not create type 'WebServiceFB'" ....
View 1 RepliesI have build an web application in Visual studio 2005. Its working fine in the loal. But When I upload the same web application in the remote server, It produces the error,Parser Error Message: Could not load type '_Default'. I have tried the rebuild solution, rebuild website, and rebuild project. But the error remains same.If any one came accross similer error and resolved the issue, Please help me to solve this issue.
View 1 RepliesServer Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load type 'wamsilverlight.Web.Wam'.
Source Error: [Code]....
Version Information: Microsoft .NET Framework Version:2.0.50727.4952; ASP.NET Version:2.0.50727.4927
All of the following have been tried over and over again:
1.) Delete all existing .dlls
2.) Delete MasterPage File and recreate it.
3.) Delete MasterPage perform a clean rebuild then recreate
4.) Delete web.config file and recreate
5.) Delete web.config file perform a clean rebuild then recreate
6.) Destroy the entire project and start from scratch
7.) Before any of these steps were taken the project was built with Ctrl+Shift+B and again with F5
8.) Checked all of the namespaces to make sure nothing was conflicting
9.) Checked IIS7 to see which .NET Framework was being used and it is all listed under 2.0 and later at one point even trying to swithc it over to .NET 4.0
The problem is rather persistant, annoying, and frustrating and I would truly love to acquire some input on correcting this matter,issue occured out of the blue one minute working the next minute it errors out.
I'm only pretty new to .net MVC. I have a solution which has 2 projects one is asp .net 2.0 and the other is asp .net MVC. I created the MVC project and it was working fine. I then imported the project into the solution in it's own folder and now I'm getting an error when I try to run it. What am I missing? Parser Error Message: Could not load type 'System.Web.Mvc.ViewMasterPage'.
View 1 RepliesI developed a web service in VS2010 on my local machine, wrote a consumer of it also locally, and that all works.
I copied the dll and the asmx file to our server, and I am getting an error when I try to invoke it from a browser (also still on the server machine) to make sure it correctly exposes its web methods, but it is not, it is saying "Could not create type 'Service'". That error comes from this line:
Line 1: <%@ WebService Language="C#" CodeBehind="~/App_Code/WarrantyDuplicate.cs" Class="Service" %>
There other web services in the same folder on the server that all work fine so I don't believe it's an IIS setup thing.
This is my first web service in C# and when I created it in VS I did think it odd that the code behind file went into App_Code (as you can see from the line in the asmx file) and is just named dot-cs rather than asmx-dot-cs. But since it worked fine locally, I wasn't sure that mattered.
I added a web reference to a web service to my web project. I can add an instance of the web service in my code and everything appears to work fine. But if I try to debug my code I get a complie error stating that the Type is not defined. What am I doing wrong?
Description: An error occurred during the compilation of a resource required to service this request. review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30002: Type 'WSQSPExport.OrderImport' is not defined.
Source Error:
[Code]....
Line 336: Dim boolResult As Boolean = True
Line 337: Dim strException As String
Line 338: Dim objQSPExport As New WSQSPExport.OrderImport
Line 339: Dim reader As XmlReader
Line 340: Dim sr As System.IO.StreamReader
Source File: F:WebsxxxFarmsxxxWebApp_Codecls_ExportQSP.vb Line: 338
I have created an application which runs fine in VS2010.Now i am trying to host that application using inetmgr.When i try to browse the page from inetmgr content view then i get the "Parser Error Message: Could not load file or assembly 'System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified".If i browse the page from VS i am able to do it.I am not able to host the app. may be the reason is the above stated error.
View 1 RepliesIm running a web application in visual studio 2008..i got this error when particular page was loaded..
help me to proceed....
Server Error in '/PSS.NET' Application.
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Ambiguous match found.
Source Error:
<%@ Register TagPrefix="uc1" TagName="CtrlButtonControl" Src="../../WebControls/CtrlButtonControl.ascx" %>
<%@ Page language="c#" Codebehind="SPSearchFromToDtStorLocMatTypRank.aspx.cs" AutoEventWireup="false" Inherits="Sdi.Pss.Reports.SP.SPSearchFromToDtStorLocMatTypRank" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" >
Source File: /PSS.NET/Reports/SP/SPSearchFromToDtStorLocMatTypRank.aspx Line: 1
Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3614
I keep getting this error message after upgrading an application from .net framework 3.5sp1 to 4.
The thing is, the block is well formed!
Code:
Line 1: <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="~/Default.aspx.vb"" Title="DRL Manufacturing" Inherits="PrototipoJTSConsultasInventario._Default" %>
I'm a newb to ASP.NET and I made an app in VS2010 using NET 4.0 (Working all fine in debug mode)
I tried to host my app @ aspspider and I'm getting the following error:Parser ErrorDescription: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.Parser Error Message: Could not load type 'AuthStealerPanel._Default'.Source Error:
Line 1: <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="Default.aspx.vb" Inherits="AuthStealerPanel._Default" %>
I also tried to rebuild the .dll and upload it to the /bin/ and application's root.
I have built an application in ASP.NET 3.5 framework and it is working fine on localhost but when i am uploading it on my server the page gives an error on loading "Parser Error Message: Could not load type 'Default'." <%@ Page Language="C#" AutoEventWireup="true" Debug="true" CodeFile="Default.aspx.cs" Inherits="Default" %>
View 2 RepliesI am very new to ASP .net. I need to create web application with ASP .net using VB. I have created a project and create web forms with Visual Studio 2005 (ASP .net version 2.0). And it was working fine on local host. However, I got an error after I published the forms on our hosting site. The error code was as following:
Line 1: <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="Login.aspx.vb" Inherits="KocaWebSite.Login" %>
Line 2:
Line 3: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
I have tried to find the answers on this forum as well. But I couldn't find clear answer.
I am integrating third party Web Page Management CMS solution into my web application. I am getting the following error when I try to recompile:
Parser Error Message: The type 'oboutSolutions.ManageWebsite' is ambiguous: it could come from assembly 'C:VS2010 ProjectsTestCMSCMSinoboutSolutions.DLL' or from assembly 'C:VS2010 ProjectsTestCMSCMSinCMS.DLL'. Please specify the assembly explicitly in the type name.
Source Error:
Line 1: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="ManageWebsite.aspx.cs" Inherits="oboutSolutions.ManageWebsite" %>
Line 2: <%@ Register TagPrefix="obout" Namespace="OboutInc.Editor" Assembly="obout_Editor" %>
Line 3: <%@ Register TagPrefix="obout" Namespace="Obout.Interface" Assembly="obout_Interface" %>
<asp:HyperLink
ID="hypInspeForm"
runat="server"
NavigateUrl="rpt_print_inspectionFrm.asp?task_id=<%#Eval("task_id")%>"
Target="_blank"
CssClass="linkbutton">Inspection Form</asp:HyperLink>
Comes up with this error: Parser Error Message: The server tag is not well formed.
I have recently moved my project to VS2005 and I have trouble running all pages that have code behind. I set up a DEV sub domain so I could start with one page and work out what is going on.
I have got the page working locally but it won't work when I upload the page, dll and associated files to the web server (hosted for me).
The error seems simple enough, it's a parser error saying it can't find the code behind file (aspx.vb), but I can't for the life of me work out why, especially when it works locally.
Problem Page = [URL]
Parser Error Description: An error occurred during the parsing of a resource required to service this request. review the following specific parse error details and modify your source file appropriately.
Parser Error Message: The file '/rss/rss_darts_players_cx.aspx.vb' does not exist.
Source Error:
[Code]....
Can somone help me with this error?
Configuration Error
Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.Parser Error Message: Default Role Provider could not be found.Source Error:
[Code]....
Source File: C:inetpubReaganweb.config Line: 43 Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927 here is my web.config code for the provider
[Code]....
i created a site called birthday_calendar in vwd 2008.. it runs in my local system correctly, but when i host this site, it showing error"Could not load type: birthday_calendar".. what is the wrong with this? I just copied the website files to hosting server. I dont have any bin folder in my website containing dll files.. i googled this error, results are showing that, the website should be compiled and bin folder should be in correct place.
View 1 RepliesI have created a web application project in vs2005. This is a simple website which has one form and a master page. It runs fine in my local machine but when I publish it to my hosting server it shows error in master page i.e.Parser Error Message: Could not load type 'WebApplication1.Site1'. Site1 is my master page.
The line on which the error is occuring is
[Code]....
I open the page yesterday, it is working fine,, but today I am getting this error...Parser Error Message: Ambiguous match found.Source Error:
Line 1: <%@ Register TagPrefix="NetMenu" Namespace="CYBERAKT.WebControls.Navigation" Assembly="ASPnetMenu" %>
Line 2: <%@ Page language="c#" Codebehind="ClientDetails.aspx.cs" AutoEventWireup="false"
[code]...
I'm getting this message when going to a web app that accesses my service.
"The content type text/html of the response message does not match the content type of the binding (text/xml; charset=utf-8)..."
The thing is, it happens once in a while even when no changes have been made to the service or the web app. And I can make it go away most of the time by going directly to the .svc?wsdl page in my browser and then coming back to the web app.
We are getting this error message when we try to click the link in the menu to go to Report Server:
Source Error:
Line 31: <siteMapNode title="Reports" description="Reports">
Line 32:
Line 33: <siteMapNode url="https://ffxsqldgc01.ffx.co.fairfax.va.us/Reports/Pages/Folder.aspx?ItemPath=%2fDPZ&ViewMode=List" title="View Reports"
description="Click here to view the reports" />
Line 34: </siteMapNode>
Line 35:
I tried to add after the &, as it was suggested on one of the forum but it did not work. Any other ideas.
I installed microsoft web search in my machine and now I am getting below error
- I have already uninstalled webserch
-Disabled the indexing services
- Deleted all files from c:/windows/microsoft.net/framework/v1.1.4322/Temporary ASP.NET Files
- Restarted application and computer several times
- restarted IIS many times
Nothing is working this stupid error, I have already wasted more than 3 days now can anyone help me fixing this. Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Access is denied: 'ConcordeSF'. Source Error:
[Code]....
Source File: c:windowsmicrosoft.netframeworkv1.1.4322Configmachine.config Line: 198 Assembly Load Trace: The following information can be helpful to determine why the assembly 'ConcordeSF' could not be loaded.
I have a parent web application, called Parent, and a second web application called Child. Child is a virtual directory in IIS7 under Parent which is an application in IIS. Child is not a child directory of parent in the file system, only in IIS as a virtual directory. On application loading (Application_Start in global.asax) in the parent web application i tell it to load the child web dlls from childs bin folder using Assembly.LoadFrom() loading it into the app domain of Parent. Then when i try to visit /Child/Default.aspx I get an error saying: Parser Error Parser Error Message: Could not load type 'Child._Default'. Now the Child.dll (the web dll containing childs code behind etc) is in the app domain of the parent application and i can successfully reflect it and its members from code behind in the Parent page Default.aspx.
Furthermore on the Child/Default.aspx if i change the Inherits="Child._Default" to Inherits="System.Web.UI.Page" and then in <% %> tags on the page enumerate the dlls in the app domain i can see Child.dll and reflect its members and invoke functions. One thing that works is changing CodeBehind to CodeFile in the page directive. Then the page parses correctly. However this only works when the websites are in uncompiled, non published form.
if i have the web application with many pages like add order page, edit order page, and delete order page actually they also interact with the Sql Server 2008 and i also create web service page call Sales_Service.asmx. i know just i need to put something like query into Web Method in Sales_Service.asmx but i have a lot of queries, i don't know which query i should put into it and how the web page call the Sales_Services.asmx
View 2 Replies