VS 2010 - Web Service Runs Locally But When Deployed Has Error Could Not Create Type Service
May 24, 2012
I developed a web service in VS2010 on my local machine, wrote a consumer of it also locally, and that all works.
I copied the dll and the asmx file to our server, and I am getting an error when I try to invoke it from a browser (also still on the server machine) to make sure it correctly exposes its web methods, but it is not, it is saying "Could not create type 'Service'". That error comes from this line:
Line 1: <%@ WebService Language="C#" CodeBehind="~/App_Code/WarrantyDuplicate.cs" Class="Service" %>
There other web services in the same folder on the server that all work fine so I don't believe it's an IIS setup thing.
This is my first web service in C# and when I created it in VS I did think it odd that the code behind file went into App_Code (as you can see from the line in the asmx file) and is just named dot-cs rather than asmx-dot-cs. But since it worked fine locally, I wasn't sure that mattered.
View 2 Replies
Similar Messages:
May 28, 2010
When I deploy my web service, I get the following error:
There is no build provider registered for the extension '.svc'. You can register one in the <compilation><buildProviders> section in machine.config or web.config. Make sure is has a BuildProviderAppliesToAttribute attribute which includes the value 'Web' or 'All'.
I found one thread ([URL] that a solution but, I can not get it to work. If I make the changes to my web config file as in the thread, I then get a configuration error. One odd thing is that, if I check the machine.config file on my machine, located at C:WINDOWSMicrosoft.NETFrameworkv2.0.50727CONFIGmachine.config, I don't see any of the config settings described in the thread. As a matter of fact, there is no mention of "compilation" or "buildProviders" at all.
Here is my entire config file listing:
[Code]....
View 2 Replies
Sep 24, 2010
My web service works fine on my local machine but when i put it on the server it throw this error:
Parser Error Message: Could not create type 'Service'.
I don't know how to fix this.
View 1 Replies
Jul 12, 2010
This my scenerio
1. I have created a web service
2. I need to host it in IIS locally for testing purpose.
3. Can we set port locally or automatically port '80' is assigned.
View 1 Replies
Nov 17, 2011
I have a deadline to install my windows service NOW. I developed it in VS2010 and chose the .NET 4.0 framework. The server where I am installing it, which is a server that hosts our live web sites, does not have .NET 4.0 installed. So I have to change the framework to 3.5. I have this error now when I try to build:
Error13Type System.Drawing.Point, System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a in the data at line 120, position 4 cannot be located. Line 122, position
5.C:DevprojectsDocFtpToVendorDocumentFtpProjectInstaller.resx1225DocumentFtpIt is in ProjectInstaller.resx and also Service1.resx. Is it because the version=4.0.0.0, and if so how do I change that? And if not, what is the cause?
View 9 Replies
Mar 17, 2011
How to create an instance of web service without adding web service reference? How to identify the server address/name where the web service is hosted from C# code?
View 1 Replies
May 21, 2010
unfortunate events we published a web service with the tempuri-namespace a couple of months ago and no one noticed (not in our company, not the companies connecting to the web service) even though it's live since that time and lots of companies (~25 i guess) already access this web service.Now I'm thinking of correcting that mistake and have the namespace fixed to a proper value.The only problem is that as soon as we would do it, all the programs and services connected to this web service would stop working. I can't really allow that to happen.Is there any way to fix the namespace for future purpose or to have the web service operate under two namespaces as one web service?What can I do to get rid of the tempuri-namespace and have it fixed without needing to synchronize the change with all the external companies?
View 2 Replies
Aug 30, 2010
How to create simple web service in VS2010 Professional (trial version). There is no template to do this. I am not trying to create WCF service here.
View 2 Replies
Jan 5, 2011
I have been wrestling with web services technology/techniques for part of 2010 - learning how to reate/consume/deploy... I have also been experimenting with third party web controls from ComponentArt. In some of the samples from ComponentArt I observed that they use .asmx files locally to populate their custom data controls (datagrids, comboboxes, treeview controls...). What is interesting (and a little bit confusing to me) is that in the ComponentArt samples they reference the web services directly within their controls in the markup. My question is if this can be done normally with controls that ship with Visual Studio (any version -- I have em all 2005, 2008, 2010). I ask this question because from VS I only know to reference web services by right clicking on the project in the solution explorer to add a web reference.
Here is the services tag used by ComponentArt
<Services>
<asp:ServiceReference path="FileExplorerTreeViewService.asmx" />
</Services>
Then in the property grid of a data control -- say a treeview control-- they reference the web service, and when the project is run -- the control is populated with data from the web service.
Do data controls from VS support this technique? My other question is if there is a benefit to using a web service as a datasource for a control and what is this benefit? What is the criteria for using a web service in this manner?
View 3 Replies
Mar 10, 2011
how can I consume a Web service in my client system which has deployed in different server?
View 2 Replies
Apr 7, 2014
We have a web service running live. Last week, we pulled the source code down to my machine and successfully built it.
My goal is to become familiar with this code and document it. My problem is that I am not sure how to get it running locally.
First of all, I have to configure it in IIS or something? How do I do that, and is that indeed the right place to begin? I tried creating a consumer in a separate VS solution, and when I said browse for local web services it said "Active Directory Services cannot find the web server."
I tried this link, but got lost when it said "3.Under Visual Studio installed templates, click ASP.NET Web Service." because I don't have that template.
View 4 Replies
Feb 2, 2011
I am keep getting an error that "Service Error : wbsTest failed" where wbsTest is my webservice.
The error comes up frequently enough for the user - normally reproducible within a minute or so of working with an application.
A bit of background: An user is a remote user accessing application hosted on our servers over https. He is software firewalled and his connection isn't the fastest but it is responsive enough. When errors do not present themselves, page loads are fairly quick.
View 8 Replies
Nov 3, 2010
I have created a web service SampleWS.asmx [uses authentication mode="Windows" and identity mpersonate="true"]. Works fine on my dev using VS and Personal web server. Now to move this to QA I have created a Virtual directory called intg pointed it to a physical path on the server Now I have copied the (actually tried publish to this server folder and simple copy and paste) .asmx , dll folder and .cs to this folder on server First I received firbidden access for which I have set execute permissions on IIS to scripts and executables.This fixed the initial issue. The Web service extensions has allow for both 1.1 and 2.0 on IIS Now I receive the following error ..
Access to the path
C:WINDOWSMicrosoft.NETFrameworkv1.1.4322Temporary ASP.NET Filesintgaf936b4453b023c7"
is denied .
View 1 Replies
Mar 24, 2011
I have a web application in ASP.NET 4.0. I've added an asmx service, primarily as a source for the autocomplete extender's lookup values.
When I debug on my machine locally, everything works fine. However, when I deploy the web application to IIS 7.5, I get a HTTP 404 response when trying to send data to the service.
I am able to browse to the service definition, see the available operations. Tellingly, however, when I use the test pages to test the service using POST, I receive an HTTP 404 again.
I'm not sure what is going on. I did create the asmx file within my web application and it is deployed in the virtual directory of my otherwise working production application. Is there an issue with the .asmx file being deployed in the same virtual directory, perhaps?
View 1 Replies
Nov 15, 2010
I have a page which uploads a file from server A to server B. The user first uploads the file to server A, where it's saved into a diretory, then once the file is safely stored there, I'm transferring it to a second server, server B, using the following code:
[code]....
So, in summary, the only difference I can see between the working case and the non-working case is the server that'ssending the file.
View 4 Replies
May 7, 2015
I have a site (URL...) which loads and runs fine locally on the server itself, but when I try to access this externally from outside of the server (and firewall) will not load. In Safari for example, I get the message "Safari could not open the page because the server stopped responding".I have other sites on this server that do load and operate fine so I don't belive this is a Firewall issue. One thing I did notice however is that when the error message appears, it seems like the site is trying to change the protocol from http to https.
I'm trying to debug this to find out what could be happening. I've tried looking into the IIS logs as well as the Event Viewer but I see nothing. I have even tried to turn on Failed Request Tracking but no errors are logged.
View 1 Replies
Apr 29, 2010
When attempting to publish a web application from Visual Studio 2010, I receive the following error: Get service of SVsBuildManagerAccessor fails I'm using Visual Studio 2010 Ultimate (x86) on Windows 7 Professional (x64). I've attempted publishing the web app via FTP and Local File System and receive the above mentioned error. I've searched the internet for the error but have found no solutions.
View 10 Replies
Jul 26, 2010
I have asp.net website deployed on local server
And also i have a domain name
What i want that i want to integrate my locally deployed site with domain name.
(I have live(public) IP address as well)
View 1 Replies
Sep 25, 2010
I have developped an asmx webservice with visual studio and I deploy on IIS 7 which has 3.5 Framework by copying all the files.
When testing it says
Could not load file or 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
I don't use [System.Web.Script.Services.ScriptService] so I don't understand why it tries to load System.Web.Extensions.
Note: I'm not using any other assembly/lib I'm just learning webservice so it's very simple: I create a webservice Test.asmx with one method which uses one class Test.cs within same namespace WebServiceTest. This works locally.
View 2 Replies
Dec 3, 2010
I am developping the ERP Web Application. My solution structure is as given below. Main Web Application - Having reference to All Module Web Application. Common Web Application - Has Master Page, User Control, Login page, Defualt Error and etc Module Web Application - Having Module wise Aspx and code behind. It refer Common Web Application to reduce redundacy. In this Context we are facing the following problem.
1) while running web application in the debug mode it gives error as 'the target assembly contains no service types. You may need to adjust the Code Access Security policy of this assembly'
2) Could not Debug both Module and Common Web Application.
3) In Design Time both Master or user control not renders in refered Aspx Page.
4) While I debug in visual studio 2010, it gets restart after some time.
View 1 Replies
Jan 6, 2010
This is very strange behaviour from my login control - locally it works fine - But deployed to the web server (With an external hosting company) it gives a windows prompt, even though the authorisation is set to "Forms".Here is my web.config file:
[Code]....
View 13 Replies
Jul 20, 2010
I have a service. I have an existing class of business objects. What I would like to know is how can I pass a class through WCF from the business object assembly without having to create a new class in my WCF site while appending or tags?
Here is an existing UDT:
[code]....
View 2 Replies
Jul 26, 2010
I have a web service and its methods return a class which is name WSResult. WSResult has 2 properties. One of property's type is int and the other one's type is object. I want to return some different type with this second property.
[code]....
How can i pass an object which i retrieved from other web services or that i generated from my serializable classes inside M_ResultObject property ?
View 2 Replies
Mar 24, 2011
I inherited a old WSE 3.0 service. I am building an ASP.NET client for it. It is returning a MTOM response so my client is complaining. Does anyone know of a way to change the response type to XML? Or change my client to accept MTOM? I just want this crap to work.
View 2 Replies
Aug 6, 2010
So I have a class library project, a web service project and a website project.
In both the web service project and website project, I make a reference to the class library project, then in the website project I make web reference to the web service in my localhost.
So my web service project have the below web method
<WebMethod()> Public Function HelloWorld(ByVal tempClass As testSolutionClassLibrary.Class1) As String
Return "Hello World"
End Function
I don't understand why when I try to call the above web method from my website project, the parameter change from "testSolutionClassLibrary.Class1" to "testSolutionWebServiceRef.Class1"? Shouldn't it remain as "testSolutionClassLibrary.Class1"?
View 1 Replies
