Web Forms :: 'MachineToApplication' Beyond Application
Mar 26, 2010
Today I went over to the FTP at work and took a copy of the site being developed in India to help them along with the development process. However after I copied it to the local machine here at work, I get the following error when trying to run..
"It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS."
It seems to be pointing to this line in the web.config
<authentication mode="Windows" />
I don't understand? Do I have to install IIS on my Vista machine here at work and configure it somehow? Or do I need to modify the web.config?
View 4 Replies
Similar Messages:
Apr 20, 2010
I´m trying to build a site : http://muralhas.siteparaver.com/ with a login and a password, but when i log i get this error:
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error: [Code]....
View 2 Replies
Mar 1, 2010
I have downloaded the online project in ASP.Net. While running application I get an error "It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS".
What changes should i make in web.config or elsewhere to make this work?
View 4 Replies
Mar 14, 2011
I have a website in asp classic. This website has a virtual directory in IIS. I have copied some
asp.net pages to same directory. Pages are working fine but I am not able to debug website it give me this error:
Error
160 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
I have searched internet and find a solution that create an application in IIS, I have created application but still error is there.
View 5 Replies
Mar 8, 2010
I have created a website which has a main level and 2 sub categories which can only be accessed if logging in. I am using visual web developer 2008.So for example i have admin and prodpage as a subfolder which requires authentication. I currently have
<location path="/Admin">
<system.web>
<authentication mode="Forms">[code]....
but i get the error
It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level
Note:i have added in the main part of the config a forms authenitication but this redirects me start to the login page upon loading website which is not what i want. This part was meant for prodpage.
[Code]....
I also have a sub web.config under prodpage which basically does the following:
</authentication>
<deny users="?" />
</authorization>
View 5 Replies
Sep 2, 2010
I have done project in .NET 1.1. when i am opening that project in vs2005 that through solution explorer and build i am getting error like below.
It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
i am configured my local with virtual directory also. i open through local iis it is working fine .but if i run the application then i am getting error above.common thing s i have done are my application has 3 weconfigs in 3 folders and one main config. and i have taken individual authentications and authorisations in main config only. this is not a priblem .actually this problem will occur if we have webconfigs and each have permissions then we will get this right, no problem i seperated.
but why i am getting this error. if i open in vs2008 also i am getting this error,
View 2 Replies
Oct 18, 2010
I want to manage two web.config file in a application one for the front-end user and second for the back-end(admin) user.for admin section I have created a folder with name admin in the same website.following settiongs are in the admin/web.config
when I am trying to run the application I am getting following error message:It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS
Same problem have discussed on below
http://stackoverflow.com/questions/1546568/asp-net-error-tt-is-an-error-to-use-a-section-registered-as-allowdefinitionmac
http://stackoverflow.com/questions/690909/it-is-an-error-to-use-a-section-registered-as-allowdefinitionmachinetoapplicati
View 2 Replies
Mar 18, 2011
I have to do some changes in a site which was developed by some developer already. On server it was not in built format while it was in code format. I downloaded its copy and try to run it on my machine (I have Win 2003 server) but faced the subjected line. In web.config its authentication mode is form. I am not much experienced and have not used form authentications. I even tried to create a new web site and copy files in it and run it but no luck. Please guide me how I can remove this error.
View 1 Replies
Mar 11, 2010
I am using VS 2008, IIS 7, .NET 3.5 on a vista machine. I created a new web-site using "HTTP", thus to use IIS. The application being created by VS 2008 created the virtual directory.
There are only two objects created initially with a new website "Default.aspx" and "web.config" file. I've made no changes and choose to view in browser and receive the following error:
It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
I've removed and reinstalled IIS 7. None of the sites previously created work. I've validated that a duplicate webconfig doesn't exist.
View 2 Replies
Jun 24, 2012
Error 1 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. Â This error can be caused by a virtual directory not being configured as an application in IIS. C:UsersAbu AmmarDocumentsVisual Studio 2010WebSitesPromotionBusinessObjectweb.config 125
View 1 Replies
Sep 11, 2010
in my code i use in the web config the following code
Code:
<compilation debug="true" strict="false" explicit="true">
<pages enableViewStateMac="true"/>
<machineKey validationKey="135265D42623958C1E84631D0AB327E8E43 3978BD4A28FC0A0CD71E38A5F3D4F950DD32034058613CBFF0 890211D4E6F4C6E79EDC6A522572B31F3583DC5D929" decryptionKey="FE65F6B07ACA419BC98EC59992702913509 ECDA570BDA0B86643F4EE21643671" validation="SHA1" decryption="AES"/>
i use this code because i had problems when 30 minutes of the last action were past then it didnt found the other pages of my project with this code it works fine
but i have a subfolder inside the project and there the problem still exists
i had a web config there then i tried to adjust the previous code inside this second web config but i took this error "It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS."
View 3 Replies
Jan 27, 2010
I'm experiencing a to me mysterious error when sending e-mails through a SMTP-server from an ASP.NET web application. I get the famous error "unable to relay for xxx@yyy.zzz". What's mysterious to me is that when I cut and paste the exact same code that sends the e-mail into an usual .NET Windows Forms application, send the e-mail with this application, it all works just fine. This made me think that perhaps the problem is that the ASP.NET application runs as NETWORK SERVICE while the Windows Forms application runs on a domain user account, but it turns out that I have another ASP.NET application sending e-mail through the same SMTP-server running under NETWORK SERVER at the same IIS, and this application does not experience this problem.
I've further tried to send e-mails through the SMTP-server manually by telnet the smtp-server on port 25 and running the SMTP-protocol manually, and it all works fine. The SMTP-server is not configured with any kind of authentication or SSL.
Another mysterious fact is that the ASP.NET application can send e-mails from an adress within the same domain to an e-mail adress within the same domain, but not to any adress outside of the domain. But the Windows Forms application, that uses the exact same code, can send e-mails from any adress to any adress both within AND outside of the domain.
So to summarize:
The ASP.NET application can send
e-mails from addresses within the
domain to adresses within the domain,
but not to addresses outside of the
domain.
A Windows Forms application running
the same code on the same computer
can send e-mails from ANY address to
ANY address.
Another ASP.NET application on the
same IIS running under the same
account (NETWORK SERVICE) can send
e-mails using the same SMTP-server
from ANY adress to ANY adress.
There is no authentication configured
on the SMTP-Server.
Both the ASP.NET application and the
Windows Forms application utilizes
the System.Net.Mail.SmtpClient class
to send a
System.Net.Mail.MailMessage.
The code that sends the e-mail massage is:
private void button1_Click(object sender, EventArgs e)
{
MailMessage mesasge = new MailMessage(txtFrom.Text, txtTo.Text, "Test mail", txtBody.Text);
SmtpClient client = new SmtpClient();
if (!(string.IsNullOrEmpty(txtUserName.Text))) //Is false since txtUserName.Text is empty
client.Credentials = new System.Net.NetworkCredential(txtUserName.Text, txtPassword.Text);
client.EnableSsl = false;
client.Host = txtServer.Text;
client.Port = 25;
try
{
client.Send(mesasge);
}
catch (Exception ex)
{
txtResponse.Text = ex.Message;
}
}
As far as I can understand, this should be a matter of configuration rather than coding issues.
View 2 Replies
Feb 22, 2010
I have a requirement for building an instant messenger application for the selected user.
I have googled for the solution but without any sucess.My requirement is once a user initiates a chat with another user,the another user needs to get a popup of the chat window,where the two users can start chatting.
View 4 Replies
May 12, 2010
We have an ASP.NET 3.5 Web application in which we have faced the below issue:
The application is working fine but suddently at one point application URL prompts for the authentication. When we (the support team) checked the server, we were able to identify that the access was denied for some of the main files (like web.config, default page). When we enabled the access the application started working fine.
View 2 Replies
Jul 13, 2010
I have to implement broker and dealer socket connection like in share market i.e. it should connect at 9 AM and stop at 3.30 PM and repeat in next morning ...
so following is my requirement
1) i have to create application object once in day at 9 AM and destroyed at particular end day 3.30 PM.
My question is how to destroyed application object at given particular time ... i think this can be done in application_end handler in global.asax ... but my question is when no request is made at that time then what happened..
View 2 Replies
Nov 3, 2010
I have a simple windows form app that I need to get the file path for. I am placing a config file in the same directory and I need to be able to get the path to that file.
I have used
Application.CommonAppDataPath
but that returns the path with 1.0.0.0 at the end.
and
Applicaiton.StartupPath
but that returns the path with indebug at the end
Is there anyway to get the path to just the main file directory without anything appended to the end?
View 3 Replies
Jan 25, 2011
why is it that the exact same codes that i use to create a Windows application, which is able to work, does not work on a Web application? i created a windows application using c# and socket programming language. i will be connected to a remote server and through the windows application, and i will be able to send the "byte[] msg" to the server and activate the LED lightbulbs attached to the remote server. that exact same codes works well on the Windows application. however, when i create another Web application using the same exact codes, i does not have any error yet i am not able to activate the LED lightbulbs attached to it. is it that through the web or internet explorer i am not able to send the "byte[] msg" correctly? or that i sld modify "byte[] msg" to suit the web usage? or any other reasons?
View 7 Replies
Jul 21, 2010
i have classes of my web application only the default one work if i for example click a link to go to another class i get this error for each class this happens . But only on the web server WHy ?
Server Error in '/' Application.
Parser Error
Description:An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load type 'WebApplication2.Login2'.
Source Error:[Code]....
Line 1: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Login2.aspx.cs" Inherits="WebApplication2.Login2" %>Line 2: Line 3:
Source File: /Login2.aspx Line: 1
View 4 Replies
Nov 22, 2010
I am using Multiple applications with single login. Login page also in seperate Application.
I want to send secured values from login page to another application based on logincredentials. Those values shouldnt visible to Any one.
View 3 Replies
May 19, 2012
is it possible to call or integrate the windows application into asp.net web application? is it yes then tell me how to do it.
View 1 Replies
Mar 30, 2010
i have two application suppose wwwroot/one and wwwroot/two.
there is one .aspx page on "one" application into which i want to get file(.xml) from application "two" and do some work on that file like save,edit,delete etc..
and than save that file into "two" application.
like
wwwroot/one/MyFile.aspx --> this is file into which i want to access aaa.xml file from application two/File where File is a folder. all file operation is here.
wwwroot/two/File/aaa.xml --> this is xml file which is reside in another application
View 2 Replies
Feb 3, 2010
How to remove the unused references in form level, vb.net application and web application?
How can I use fxcop to identity undisposed objects like dataset, dataview, connection, stream...? Any one having custom rules for the same?
View 1 Replies
Jun 16, 2010
I have two applications(A,B) both are developed in .NET3.5 and used LDAP services.Application-A in one screen we are fetching users with role "project Leads" and it is taking 10 min time
Application-B in login screen we are checking user is authenticated or not and it is taking 20 sec
Both the applications are using the same service then way there is a time span problem. Please suggest me what can I do to improve performance of application A?
View 3 Replies
Jan 30, 2010
I have two .NET applications X and Y
a. I want to have User A as a common user for both application X and Y.
b. User A can have different roles on X and Y. Eg. Read permission on Y and Write Permission on Y.
How do i configure ASP.NET membership to achieve about functionality.
View 3 Replies
Apr 8, 2010
on desktop start has disappeared, getting above issue on double clicking/running any application.have VS2005 installed with sp1 and all other relevant updates as per MS..., i read some forums which states because of VC++ the system files may be currupted....have not installed VC++can anyone guide me the issue here and its solution...
View 3 Replies
