I'm working on a web application using VB.NET. In page load event am calling a remote web service which take time to bring the data. During this process none of the other contents on page are shown(render).
I want to call this remote web service asynchronously so that other data of page is displayed and web service data will be displayed when its available.
I make an asynchronous call from one web service to another web service deployed on different server? The scenario is that an ASP.NET webforms page will call a web service in an async manner. This particular web service will then make another async call to a second web service deployed on different web server. This this possible to achieve, and what additional steps or code would be necessary to make this happen?
View 1 RepliesI've noticed that Page_Load event fires when file is asynchronously uploaded. How can I check if postback was caused by AsyncFileUpload?
And why FileContent .Position is always at the end of stream? (it started to be so after the deployment, was ok while developing!)
I have an ASP.NET (3.5) web page which calls a few web methods (SOAP based) using jQuery's .ajax method. The web methods implement 'ScriptMethod' attribute and return JSON data. The web service file (asmx) is local to the same project.
I noticed these web methods execute synchronously on the server which means they run sequentially and affect performance negatively, some methods are waiting, when some of them are slow.
I read this article and I am not sure if I understand that WebMethods which implement Scriptmethod can run synchronously only (they implement IHttpHandler not IHttpAsyncHandler).
If this is true, I might have to change the design. I am looking for other designs, maybe like using WCF, where the browser can call webmethods using JavaScript and the web methods run asynchronously on the server.
i have explicitly added __doPostBack() on Button onclientClick event .
[Code]....
When I am clicking the button the Page_Load is calling twice.
But if I am adding below code inside page load ,page load is calling only once on button click.
[Code]....
and return true is giving me again twice page load ,but adding return true or false in attribute.add code is giving the same result ,only one page load call.
[Code]....
I am not able to understand what is going on exactly I try to add __doPostBack in different way.
I have a web service that has a CreateReport method that generates a report based on the specified criteria.
When I call this method Synchronously using a Windows Application or Console Application, the call works fine and the report is created.
When I call this method ASynchronously (CreateReportASync) using Windows Application the report is created.
When I call this method ASynchronously (CreateReportASync) using Console Application the web service does not even get the call.
I am using VS2005 and .Net Framework 2.0. So the proxy is automatically created with the Async methods. I am not really interested the result of the method call, so I do not add a Callback Delegate.
I have explicitly added __doPostBack() on Button onclientClick event.
<asp:Button ID="Button1" runat="server" Text="Button"
OnClientClick="__doPostBack('Button1','')"/>
When I am clicking the button the Page_Load is calling twice. But if I am adding below code inside page load ,page load is calling only once on button click.
Button1.Attributes.Add("onClientClick", "__doPostBack('Button1','')");
Again if i add with return false it is giving me it calling only once page load on click
<asp:Button ID="Button1" runat="server" Text="Button"
OnClientClick="__doPostBack('Button1','');return false;"/>
and return true is giving me again twice page load ,but adding return true or false in attribute.add code is giving the same result ,only one page load call.
Button1.Attributes.Add("onClientClick", "__doPostBack('Button1','');return true;");
I am not able to understand what is going on exactly when I tried to add __doPostBack in different way.
I want to convert following PHP code to C#.
$client=new SOAPClient(API_URL."www/ws_rpc.php?wsdl&actor=fieldreport_actions&client=".API_KEY,array("uri"=>"SOME_URL","style"=>SOAP_RPC,"use"=>SOAP_ENCODED,"encoding"=>"UTF-8"));
$auth = $client->is_valid_panelist_login("login_type_email",$username,$password);
How can I do it? I found 1 sample at: Help me convert this PHP SOAP code to C# But this looks bit different.
For an ASP.Net website with calls through to a WCF Service:
Three web clients click the button that calls the WCF Service simultaneously.
Does the web server make 3 concurrent calls? (e.g. WCF Service receives 3 concurrent calls) one on behalf of each web client?
Does anyone have a sample code on this? I want to call the FedEx "Rate Available Services/Rate Shopping" Service to retrieve pricing for various services.
View 2 RepliesMy requirement is i need to display some quotes from some vendors in my User Interface. Some of the quote details will be fetched from database where as some vendors are giving web services to get the quote results. I need to combine the quotes from database as well as the various web service response and display in the grid.
View 1 RepliesI am posting this as a part of my effort in searching the best possible design solution for my requirement. I am currently working on a complex server control(not user control) in asp.net which is going to be rendered into html elements on the client side.And those html elements needs to do a ajax call backs to the server using js/jquery. Here is the problem. As this is a serverside control and can be added into any application/domain. I dont want to have those callback services hosted separately. Is there any way that I can host those server callback services in the same library? If so, how can I access them from the client side?
View 1 RepliesI open a pop up window by window.open, then after selecting value from grid link i need to move my parent page as i am doing like
<a href="../../AddressBook/AB_UDCMaster.aspx?mode=Search&ParentCode=<%# Container.DataItem("ParentUDCCode") %>&UDCParentID=<%#Container.DataItem("UDCParentID")%>'"><%#Container.DataItem("ParentUDCCode")%></a>
This should be an easy solution but I get stuck with it and hope I can get some advice/guidance from you:I have a simple aspx page with a Paypal button in it. The code shows in .aspx page:
[Code]....
I'm using ASP.NET 3.5 and C#.I load an SqlDataSource into a DataView on my Page_Load event. My SqlDataSource queries arandom record from the database. On my page I have an ImageButton, which when clicked uses a Response.Redirect("AnotherPage.aspx + "random id from database"). My problem is that when the button is clicked it fires the Page_Load event before the Response.Redirect takes place in the button_click event. This causes the current data(the users "id") that I had pulled from the database to be overwritten with new data(a different "id") from the database. So essentially the the page is redirecting to the 2nd random id that is queried from the db after the button is clicked and Page_Load is fired again, not the original id. Here's my code, hope it makes sense.Here's my Page_Load:
[Code]....
Then my Button_Click Event:
protected void btn1_Click(object sender, ImageClickEventArgs e)
{
Response.Redirect("~/Profile.aspx?id=" + id1);
}
Can I put my dataview in another event or method so it's not called when a user clicks an ImageButton. Also I want the DataView to be repopulated on a postback/page refresh, just not on button clicks.
I have a GridView, here I am adding the LinkButtons at runtime to the GridView cells. I am also attacing an click event on these LinkButtons.
The issue is that when I populate the GridView from the Page_load the LinkButton click works, but if I move GridView polulation code in the Page_PreRender event the click event doesn't executes.
Code:
private void Page_PreRender(object sender, System.EventArgs e)
{
//does not fires the Click event of dynamically generated LinkButtons
GridView1.DataSource = getDataTable();
[Code]....
I have a little question about building controls at runtime.
In my case I would like to create a checkboxlist in my page_load event
[Code]....
This control is a part of a wizard-Control. At the end after clicking the finisch-Button, the selected values have to sent by email to me. My question is, how can I get the ID of the Checkboxlist-Control whitch was build at runtime?I tried following workaround
[Code]....
But I get following error-message:
System.NullReferenceException: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
I have a fairly complex business application written in ASP.NET that is deployed on a hosted server. The site uses Forms Authentication, and there are about a dozen different roles defined. Employees and customers are both users of the application.
Now I have the requirement to develop a Windows Mobile client for the application that allows a very specialized set of tasks to be performed from a device, as opposed to a browser on a laptop. The client wants to increase productivity with this measure. Only employees will use this application.
I feel that it would make sense to re-use the security infrastructure that is already in place. The client does not need offline capability.
My thought is to deploy a set of web services to a folder of the existing site that only the new role "web service" has access to, and to use Forms Authentication (from a Windows Mobile 5/.Net 3.5 client).
I did see this question and I am aware of the limitations that Forms Authentication poses. Since security is not my primary motivator (I use SSL and can restrict access by IP address), but rather using existing user accounts and roles, my decision tree is somewhat different as well.
I have the web form whcih processing several web services calls.
If one call failed, it will rollback transactions. But it cannot.
Due to the web services will complete for each call.
I am using sql connection and sql command.
Is it possible to do this?
My aspx page is not showing latest data after reopen the page.. but after save data it shows latest information.
If I close the project and rerun the project then it shows latest data.
Interesting metter is the page_load event is not fired after thie page loaded once.
If I delete temporary internet files from tools-->internet option then the page reloaded.
created a control dynamicly in page_load event then cant i make that control globaly available in each class?
View 3 RepliesI'm using both seprate C# code file and JScript code file
I'm loading the JScript file using ScriptManager inside the 'Form' tag.
How do I call a JScript function from the Page_Load event handler?
Page_load event fires two time in firefox and the same page is working fine in IE. What might be the problem? If it is problem with Autoeventwireup then page_load event must fire two times in IE too. I believe it is not a issue of Autoeventwireup.
how can i find out exactly where the issue is.
I have a dynamically created user control which is accomplished usingLoadControl().
When I debug, the LoadControl call is called once, however the Page_Load inside the user control is called twice. On each occasion, the postback property is false, so it seems somehow the Page_Load event is called outright 2 times and nothing to do with any postback?
I have a TreeView on a page which I will populate the nodes on demand and a checkbox, and they are in the same updatepanel. I can dynamically add new nodes to this treeview. But when I click the checkbox which will cause a postback, the TreeNodePopulate is called before the Page_load and it will regenerate the nodes that was added before. I was very confused how could this be happened. Is this related with PopulateOnDemand and Expanded priorities?
View 3 Replies