Web Forms :: Delay In Value Of Properties Applied To Web Part?
Feb 26, 2010
So I've created a page with zones, a catalog, editor zone and property grid editor part. I have also created a simple webpart as a usercontrol and added to the declarative catalog.
In code behind of my usercontrol page I added some properties and I can edit them just fine however when I click Ok or Apply to the change of any property it takes two post backs before the changes take. So I can click Ok twice or Ok then Apply or Apply and Apply or OK then switch display modes but I will not see the changes take place inside the usercontrol until the second postback.
View 1 Replies
Similar Messages:
Sep 13, 2010
I am writing an MVC application, and I wanted to do some extra formatting so the phone numbers all are stored the same. To accomplish this I made a simple external function to strip all non-numeric characters and return the formatted string:
public static string FormatPhone(string phone)
{
string[] temp = { "", "", "" };
[code]...
View 1 Replies
Sep 3, 2012
I have four columns in database. Consider it as a,b,c and d. I'm trying to place a and b column values in TO part and c and d column values in CC part in outlook. a,b,c,d contains six digits numeric values. I just need to place a and b columns values in to and c and d values in cc part on click of a button.
View 1 Replies
Feb 17, 2010
We have several asp.net web applications we've built and we also want to embed them into various sharepoint pages. We need to have them look like standalone applications when viewed in their own pages, but also have them look like they fit within the sharepoint page when embedded. We are doing this currently with IFrames and it works ok, but I'm wondering if there is some sort of proxy web part where we can configure the web part to point to an existing web app and it will proxy the contents through from the web app into the sharepoint page removing the need for an IFrame. Possible?
View 2 Replies
Nov 3, 2010
I have a new VS2010 .NET 4.0 Web project and the Properties Folder has gone wierd on me. It has lost teh "Open" under the right click. There is no way to get a Settings file created now.
I am unable to get to the Settings grid and no Settings file is created. I tried the help and it has the normal trip of select Properties, Open (right click), Settings Tab, etc. etc.
View 1 Replies
Apr 9, 2010
I m new in web part tools in asp.net, i create a simple page using web part tools, but now i want in my web part zone too open a web site like I Google..
when u use i google there is a functionality to open a web site in web part zone.
View 2 Replies
Sep 9, 2010
When running my application lately, there is a very long delay after a request is made to the server. When debugging and stepping through, the code finishes quickly and then a dialog comes up, which I'm assuming is the reason for the lag. (I've tried a series of other options including disabling usage of ViewState, disabling debugging, installing IE 8 and reinstalling the Ajax Control Toolkit.
The dialog reads as follows:
Find Source: ExtenderControlBase.cs Original Location:
C:UsersswaltherProjectsAspNetAjaxReleases30930AjaxControlToolkitSourceAjaxControlToolkitExtenderBaseExtenderControlBase.cs
I am not familiar with any user on this machine named swalther (it was reformatted rather recently) and searching my computer for this folder turns up no results.
View 1 Replies
Nov 23, 2010
i have a asp:table with 0(zero) rows and button on my page.
when user clicks the button, it add five rows into the table and show them on the page.
but i want to show each row with some delay on page.
sequence should be like this : once a rows is added then show the loading image then add another rows ,then loading Image,then add row and so on
View 3 Replies
Oct 28, 2010
When i click on any image that will have to be redirected to the corresponding page
Suppose i have 3 images and each image is linked to different page
View 2 Replies
Mar 2, 2011
When using SPWeb.GetCatalog(SPListTemplateType.WebPartCatalog), it returns an SPList which of course contains a SPListItemCollection of the web parts in the web part gallery. When looping through the items, is there any easy way to get properties of the web parts? Such as AllowClose, CatalogIconImageUrl, etc... I know I can probably accomplish this using the listItem.OpenBinaryStream etc and loading the xml of the .webpart file, but I wondered if there was an easier way to do this.
View 1 Replies
Aug 2, 2010
I am using Asp.net menu control, how can I delay the showing of sub menu items ?
View 7 Replies
Mar 15, 2011
I have gotten confused about how page caching works in ASP.NET. Suppose a user has navigated to "home.aspx" on my website and say I release a new version of that page to the server and the user subsequently navigates to that page, he will get the updated version, is that correct? Is there ever a case where I need to be concerned that the user is NOT getting the latest version of a page(or code-behind) file? The reason I am confused is that quite sometime ago, I found the following code to put in my Page_load event to prevent page caching:
[Code]....
But the more I think about it, I cannot remember the rationale behind this. Whenever I do a release and subsequently visit my site, there is a noticable delay as ASP recompiles. So now I am wondering why the above "no caching" code would be needed or when it is appropriate to use.
View 1 Replies
Mar 13, 2011
How code a time delay before the next method is called? I have the following but I don't think it's waiting 10 seconds before calling CallMethod(). Thread.Sleep(10000); CallMethod();
View 2 Replies
Aug 27, 2012
How to delay the Auto postback for 10sec in textbox of asp.net.
I am filling the textbox by using autofill. I'm calling textchanged method in code behind, So I need to delay the Textbox for 10sec. Problem is when I entered single letter it is going for textchanged. so i need to delay the Autopost back
View 1 Replies
May 2, 2010
I am implementing my project using Asp.net and C# in Visual Studio.Net 2008 programming environment, and I've been working on this issue for a while and can't find a solution. I have a css file in "App_Data/CSS/style.css", it works fine in visual studio design view. However, when I was trying to run the program, all formating effects I defined in the style.css disappear, leaving the plain view of the interface. The master page is in "App_Data/MasterPage.master", all the other .aspx pages are under the root directory. I have this placed in the header of the master page:
<
link
rel="stylesheet"
type="text/css"
href="CSS/style.css"
/>
View 2 Replies
Apr 23, 2010
I'm using Visual Studio 2008 to develop my projects.
I created a stylesheettheme and a skin file and added them to app_themes folder.
They both have the same name: style_project.
I added line <pages stylesheettheme="style_project"> to my web.config file.
When i run my project on localhost, there's no problem, styles are being applied.
When i upload my project to other machine which has framework 3.5 on it, no styles applied.
I looked at the machines iis server and .net version is 2.0 for default application pool.
I tried on the machine on localhost, still there are no styles.
I tried project both on default website.
What is the problem? How can i solve this?
View 5 Replies
Apr 15, 2010
Why warning SkinID has been applied
[Code]....
View 1 Replies
Mar 8, 2011
I have a product-page and a department-page. Both departments and products are picked from a database by their id (productid and deptid).
When I try to route like this, it seems that only the first rule is applied, Why? How can I solve this?
In global.asax:
[Code]....
With the above settings I can reach
http://mysite.com/myproduct.aspx but not
http://mysite.com/mydepartment.aspx.
If I switch so that the DeptList rule comes first "mydepartment.aspx" works but not "myproduct.aspx"....
View 3 Replies
Aug 31, 2010
I have created a new page in rootfolderSubfolder ewfolder est.aspx , this test page is used a master page which is in rootfolderSubfolderMasterpage.Master . But styles are applied in test page.
but master is works if the page is in rootfolderSubfolder est.aspx.
View 5 Replies
May 7, 2010
I had a web page with 3 texboxes, i need to enter text one of any three textboxes.
for this i need to put required validator.
View 5 Replies
May 29, 2010
Has anyone had any issues when updating a CSS file (app created from C# Application Web Site in VS2010) and not having the changes be reflected in the browser, but you can see them in the dev env? I've tried clearing cache and rebooting... After a while of trying to set a background image to .header (which shows up in the dev env) something crazy happens to my Default.aspx and I can't get any styles applied. I'm at a loss right now...
View 9 Replies
Jan 18, 2011
I created this simple custom web control:
[Code]....
I used this control on my page:
[Code]....
The problem is that when page is displayed in web browser is see default back color, font and border, values from page are not applied on the my control. Why?
View 1 Replies
Nov 8, 2010
I have created a c# web project with Visual Studio 2010. I moved the default css file to the theme folder I had added to the project. I configured files this way: the Default.aspx is accessible by anonymous and loggedin users while all other pages are accessible by loggedin users only. I didn't use roles.
The issue is no theme is applied to the Login or Default.aspx pages if a user has not logged in.
View 1 Replies
Oct 18, 2010
I have the following gridview on my page, but when the button is pressed that displays the gridview, its just plain all white with no styling..
[Code]....
View 4 Replies
Sep 1, 2013
Error 10 Operator '*' cannot be applied to operands of type 'string' and 'int'
Show Error
Line 85: v1.Text = Convert.ToString(y[0]) + "صوت";.
Line 86: h1.Text = Convert.ToString(Convert.ToInt32((y[0] / tx) * 100));
Line 857: Image1.Width = Convert.ToInt32(h1.Text * 2);
Line 88: v2.Text = Convert.ToString(y[1]) + "صوت";
Line 89: h2.Text = Convert.ToString(Convert.ToInt32((y[1] / tx) * 100));
[Code]....
View 1 Replies
