This event handler is not responding at all to the click event. On click, the pagination numbers disappear and I'm not able to trace it in the debugger because the event handle doesn't even fire so I have no idea what's going on.
[Code]....
I got an event handler like this, in this event, i wanted to call another button click event. How can I do that?
[Code]....
if (ds.Tables[0].Rows.Count == 0)
I have searched around but unable to find a solution that will work. I have a link button that is created dynamically during the page load. It is given an ID (obviously). There is a script manager on the page. I have the controls added to a panel in the updatepanel (updatePanel1). There is a dynamic label that is also created with each link button. I can get a response from the linkbutton click event during a postback on the second time clicking the linkbutton, but I am getting a complete postback instead of the asyncpostback for that control. During the creation of the dynamic linkbuttons, I am also creating a dynamic trigger for each button and adding it to the updatePanel1. The Click event is not firing the method without doing a complete page postback.
View 4 RepliesI understand I need to load my dynmaic control on every postback and preferrably in Page_Init(). But my dyanmic controls are loaded from a dropdownlist selectedindexchanged event handler. Now after any postback, my dynamic controls are gone. How would I force it to load on every postback ?
View 2 RepliesThe code below creating a button control on my page dynamicly.
I would like to add to the control's Click event a new event handler.
How should I do it?
i'm creating the control on Click-event of one of the pre-defined buttons( btnSubmit) on my the page and
not at the Load event of the page:
[Code]....
Is there a technical reason for the existence of Page.PreLoad or is this just convenience to have a place where you can neatly place code that always have to be executed before the Load code? Is there a difference between adding code in the PreLoad event handler and adding code at the top of the Load event handler? And what would be a typical scenario where you use PreLoad?
View 2 RepliesI'm creating a GridView in code. I can successfully attach handlers for Editing, and CancelEditing. RowUpdating never runs, however. Instead, if the GridView is in a Panel, the Edit handler is called when Update is clicked (and this is the command name I get back on the Update click, too). If the GridView is not in a panel, then the Cancel handler is called when Update is clicked (again, this is the command name I get back from clicking Update). I've searched high and low for a reason why the RowUpdating event is not getting called, and I can't find one. Does anyone out there haveHere is my code (My actual code is much more involved than this, but for testing purposes, I extracted the following code and stuck it in a new project to isolate my problem):
protected void Page_Init(object sender, EventArgs e)
{
if (!IsPostBack)
[code]...
I have a page that contains dynamically generated Dropdown List controls and I want thant the dynamic dropdown list perform an AutoPostback to fill some other field using the value selected. This is the code I'm using to create dynamically the control:
[Code]....
Control is correctly filled and rendered on ASP page but, after selecting a value, the page is reloaded (AutoPostBack is called) but the control is not diplayed and the sub is not called. I put a breakpoint into the ChangeValue sub but anything happens.
I read on some post that handler for the first DropDownList is not necessary but, how is it possible to tell DropDownList to call my sub after changevalue?
How can i add a click event to my entire table (not row or cell) that will trigger a server side method and not a JS method.I know i can add attribute which calls JS and then add post back as follows:
table.Attributes.Add("onClick", "return jsFunction(" + 111 + ");");
But, i want to trigger a server side method.
I'm looking for something like we do when adding a clickable event to a control, for example...
lable.Click += new EventHandler(onLabelClick);
And then add
private void onLableClick(object sender, EventArgs e) {//... }
At page load, I created a textbox as shown below.
protected void Page_Load(object sender, EventArgs e) {
for(i=0;i<5;i++) {
Textbox tbox = new Textbox();
tbox.AutoPostBack =true;
tbox.TextChanged += new EventHandler(tboxevent);
//Here I need to pass 'i' value to the tboxevent
} }
protected void tboxevent(object sender, EventArgs e) {
Label1.Text = "i value";
}
I have a asp.net page with a button, the event the button needs to perform on it's click event needs to vary, dependant on what options are selected further up the page. The button itself is included in the master page, and it's actions are affected by selections made in the child page.
To do this, I have a method in the master page, that is called by the child page, when a users presses a button, that passes the Eventhandler to be used by that button, that is then assigned to masterpage eventhandler for that button:
public void assignEvent( EventHandler saveEvent)
{
this.SaveButtonEvent+= saveEvent
}
Then, when the save button on the master page, it calls that eventhandler
protected void save_Click(object sender, EventArgs e)
{
if (this.SaveButtonEvent != null)
{
this.SaveButtonEvent(this, e);
}
}
The event handler is assigned ok in the first section of code, however because pressing the save button causes a postback, the SaveButtonEvent event handler is set back to being null, and so nothing happens.
How can I preserve the contents of SaveButtonEvent Event Handler during postback, or is there a better way to be doing this?
EDIT:
I can get this to work by saving the EventHandler to the session, but this doesn't seem like a great idea.
I have following simple controls on a page
WebForm1.aspx
<asp:Panel ID="Panel1" runat="server">
</asp:Panel>
<br />
<asp:Label ID="lblContent" runat="server" ></asp:Label>
Some code behind in WebForm1.aspx.cs :
[code]....
When running the WebApp now and clicking on btnCreateDynamically, btnTest is created but when I click on btnTest its event handler is NOT invoked ?
I have created a dynamic grid view using Itemplate .now i have also created a dynamic drop down list in the grid . how to create a event handler for on selectedindexchange .
i created a slectedindexchange event but it didnt work .the control never passes to the event ?
what to do create a event handler
[Code].....
Using vb.net/asp.net 2005.
I have a page books.aspx that has a control named authors.ascx.
Inside the authors control there is a "select" button I want to add some kind of listener or event handler (not sure of the correct terminology) so on the parent page (books.aspx) I can respond to the "select" button being clicked.
I have to pass the authorID from the user control to the parent page.
In my authors.ascx control I just created this event:
[Code]....
Now I need to write the function for SelectAuthorBtnClick and I think add some kind of listener in the parent page to listen and handle the event.
i have two frames in a page. the fist one contains buttons the second one the form. i want to call an event from the second one after clicking a button in the first one ,
View 3 RepliesCreating a list of users with a "Delete" linkbutton next to each". Seems I got it all wrong (again..away from webforms a long time).
Here's what I do:
Building a list of users with delete buttons:
Code:
foreach (var user in users)
{
var usr = user as UserInfo;
var row = new TableRow();
var cell = new TableCell();
[Code] ....
The "Delete""event handler:
Code:
protected void btnRemoveModUser_Click(object sender, EventArgs e)
{
var button = sender as LinkButton;
var userController = new UserController();
var user = userController.GetUser(PortalId, int.Parse(button.CommandArgument));
RemoveUserFromRole(Enums.KnowledgebaseRole.KB_Moderators, user);
}
I got a hunch though it's because of the when/where I'm loading that list of users. I call the function (getting a list of all users, clearing the table and populate it again):
In the page load, if not a postback.
Every time the "Add user" function have been called (that works fine).
Every time the "Delete user" function are called.
The last will not delete the user (still in database) but reload the ^&* form without any users.
I just found that the delete handler does not get called at all, but the button post back the form, so my list of user's don't get loaded.
I would like to call a method and pass a value to it on a link button autogenerated from the database in a templatefield inside a datagrid. I don't know much about delegates
protected void GridView1_RowDataBound(object sender, GridViewRowEventArgs e)
{
..
((LinkButton)e.Row.Cells[(int)eMessage.TitleColumn].FindControl("btnMessageTitle")).Click += new EventHandler(delegate { viewSelectedMessage(this, 35); });
}
void viewSelectedMessage(object sender, int messageID)
{
lblTest.Text = messageID;
}
running the website and viewing the page source, I have realised that there is an OnClick event created for the linkbutton, however, this may be generated anyways. By running my solution using VS debugging, I can see that my method won't fire by clicking any of thos generated linkbuttons.
I am trying to create a custom GridView with a header toolbar at the top that will contain icons to export the grid view to different formats like excel, word, etc.. The problem is, I cannot get the method to fire that is assigned to handle the click event for the corresponding Image Button. The page posts back, but the code I have in the method to handle the click event does not fire. I have followed examples in other posts and from what I can tell I have followed what others have done. Can somebody take a look at see if they can find something that I am doing wrong.
[Code]....
I will describe my problem in simple way so it's not exactly what I'm trying to do but the idea is the same.Here is the problem:
I create dynamic buttons from code behind.I get some id from query string,create button with that id ,dynamic add event handler to click event,and add button to placeholder.I store the list of id-s in session and in page load method recreate these buttons and add to placeholder.One of the id-s is CurrentId and it's also stored in session.Buttons click handler do something like this
Button b=(Button)sender; Session["CurrentId"]=Convert.ToInt32(b.ID);
In page load when I create buttons I want to set button text property different from others if id==Convert.ToInt32(Session["CurrentId"]) when list of id-s are gotten from session.But problem is that click event handler is called after page load,and when I create buttons in page load ,CurrentId in session hasn't been channged by click event handler.Can you suggest any solution to this situation?
I have got most of this code online, which does not quite work, can something like this be done to produce a button click event to indicate that a built in button on the datapager control has been pressed ?
DataPager Pager1 = ListView1.FindControl("DataPager1") as DataPager;
{
foreach (Control cPagerControls in Pager1.Controls)
{
if (cPagerControls is Button)
{
Button OnClick = cPagerControls as Button;
OnClick += new EventHandler(OnClickMethod());
}
}
}
Private Sub control1 click event
& another protected sub control 2 click event
i need to call control1 click event in protected sub control 2 click event
I have a page in which I am to add dynamic controls (labels, textboxes) at run time as per request(any number of controls can be added as per request, just for timebeing i have fixed it with value 3).
I have two button on my page "Submit" and "Cancel". which will be disable only when atleast one textbox is not null otherwise buttons should be disable.
[Code]....
Java Script code :
[Code]....
I have a scenario where...
1.) Have created a div with a dropdown list and ok, cancel button
2.) On document ready - registering div created on step 1 into a jQuery dialog
3.) on a javascript button click - I am opening this dialog box.
4.) Now, the problem is - the jQuery dialogbox which I have created, needs to be used by other button clicks as well on same page. Now, my div's (which is a dialog at runtime using jQuery) ok button click is already engaged with a javascript function (button1 click) and I can not associate other button's click events with it - thus stuck up here and have no clues or hit to resolve this.
How we call a function on selecting a row in ASP.Net ....
View 1 RepliesProblem : I have Added One Link button to the above Table.. Click Event for That Link Button Is not Firing Now. when i click on link button of table event is not firing at all.
LinkButton lbs = new LinkButton();
lbs.Text = "Submit";
lbs.ID = "lnksubmit"; lbs.Attributes.Add("runat", "server");
lbs.Click+=new EventHandler(lbs_Click); tcsp.Controls.Add(lbs);
tr3.Cells.Add(tcsp);
tabspilit.Rows.Add(tr2);
void lbs_Click(object sender, EventArgs e)
{
throw new NotImplementedException();
}