Web Forms :: Error - WebResource.axd Handler Must Be Registered?
Dec 7, 2010
I migrated an ASP.NET 3.0 application from one web server to another. The only difference that I know of between these webservers are, one is running II6 and the new one (the one this app was moved to) is running IIS7. The application was running fine in it's old environment, no code changes were made, but now it doesn't seem to like the web.config. I get the following error:
I´m trying to build a site : http://muralhas.siteparaver.com/ with a login and a password, but when i log i get this error:
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
I have a site that uses the Ajax Control Toolkit that's been running for several weeks and a week ago all of a sudden users are seeing script errors. I'm getting 'Sys' is undefined errors, as well as 'object required' and other JavaScript exceptions. The site does not function because of this.
I checked the page source and looked for the WebResource.axd and ScriptResource.axd's and tried navigating to them directly by putting the URL in the browser. I got a 404 error - file not found. If I do the same in our test environment, it comes back and asks me if I want to save or open the file. If I open it, I see the JavaScript that I am expecting (from the Ajax Control Toolkit).
In our test environment, with the same code, everything works fine. This tells me there was something on the production server that's preventing this from working. About 4 days before this started happening, we found that some user documentation (PDF) wasn't being protected by Forms Authentication (we need only legitmate users having access to it) so we added a wildcard mapping in IIS with "verify that file exists" was unchecked, knowing that if it were checked, we'd have this problem. I had one of the network admins check this setting after this started happenig and he said that it was still unchecked. I asked him to remove the wildcard mapping altogether and I still see the same behavior.
I am certain that this isn't a coding problem; again, as it went through the QA process in our test environment, everything works perfectly. And after the last deployment to production three weeks ago, everything was perfect as well. We added the wildcard mapping (which shouldn't have had an effect) and four days later the site breaks. I've asked our IT department if any changes were made to the server recently and nobody says they did.
What settings does anyone know of that might be causing this, either server or application? I checked the web.config and all the sections are there that deal with the ScriptResource HttpHandler and HttpModules. In fact, the web.configs are identical between the production and test environment, so I know it hasn't been tampered with.
I have introduced site wide exception handling on my site to catch unexpected errors. The event handler sends a message to me when such an exception occurs. But the problem is that any clicks on my site will cause an exception to be thrown with the message: "This is an invalid webresource request."
I googled for an answer and only found a couple of references to 1. setting a fixed machinekey (which for some reason didn't work for me, I got an error saying that the virtual directory wasn't set in IIS, and as far as I know I'm not using IIS at all, I'm using the local development environment and then deploy to a web host) or 2. using a robots.txt file to stop robots from accessing the axd files, but that doesn't help either because it's not robots that cause the problem, anyone clicking around on the page will cause this error. how to solve this problem properly? For now I have handled it by catching and ignoring this particular error by the text in the error message, which works but I would rather fix it so that this error doesn't occur at all.
We Installed new application in our dedicated server. I struggle with an issue for the last few days. I get 404 no found in all WebResource.axd requests.
I have uninstall and install .net 2.0 - I have .net 3.5 installed as well. using webresource decrypter I found that many JS files, such as WebForms.js generate the erorr.
i use this code because i had problems when 30 minutes of the last action were past then it didnt found the other pages of my project with this code it works fine
but i have a subfolder inside the project and there the problem still exists
i had a web config there then i tried to adjust the previous code inside this second web config but i took this error "It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS."
I want to manage two web.config file in a application one for the front-end user and second for the back-end(admin) user.for admin section I have created a folder with name admin in the same website.following settiongs are in the admin/web.config
when I am trying to run the application I am getting following error message:It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS
I have to do some changes in a site which was developed by some developer already. On server it was not in built format while it was in code format. I downloaded its copy and try to run it on my machine (I have Win 2003 server) but faced the subjected line. In web.config its authentication mode is form. I am not much experienced and have not used form authentications. I even tried to create a new web site and copy files in it and run it but no luck. Please guide me how I can remove this error.
I am using ajax tabpanel control. and i have fileupload control, gridview inside the tabpanel.if i select the file in fileupload control and click upload button it has to read the excel file data and bind the gridview.i debugged the code the dataset has the correct values and bind method also calling successfully. but finaly in the screen shows this error message "Script controls may not be registered before PreRender." what is the problem.
I have developed a website that allows users to upload office documents then uses the office object model to convert the document to an HTML file that it then displays in an iFrame. I have, of course, included references to Office.interop.word, and the site works fine on my development machine. When I uploaded it to my production server the site functions fine until I try to upload a document. I initially got a similar error that said "COM object not registered". I realized that Word wasn't installed on my production server. So I installed word and now when the server tries to access the word object model I receive the following error:
Retrieving the COM class factory for component with CLSID {000209FF-0000-0000-C000-000000000046} failed due to the following error: 80070005 Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
I searched the registry for the corresponding CLSID and found a corresponding folder. I added full control to the IUSR_ account and due to the persistence of the error I eventually added full control to "everyone" and ensured these permissions inherited down to the rest of the folder. I then added full control to IUSR_ and again eventually added full control to "everyone" to my microsoft office folder. I don't know what other permissions to grant and where in order to make this "Access is denied" error go away. I must be granting them in the wrong place, because as far as I know I can't be any more permissive than "Everyone" "Full Control".
I successfully added and configured HttpHandler in an Asp.Net WebApplication, but facing problems while trying to add same HttpHandler to Asp.Net WebSite. I have registered it in the web.config, am i missing something This is the error I am getting Configuration Error
Description:
An error occurred during the processing of a configuration file required to service this request. Parser Error Message: Could not load type 'MyHandler'.
Line 98: </pages> Line 99: <httpHandlers> Line 100: <add verb="*" path="*.result" type="MyHandler"/> Line 101: <remove verb="*" path="*.asmx"/>
Here is handler
public class MyHandler: IHttpHandler { #region IHttpHandler Members public bool IsReusable { get { return true; } } public void ProcessRequest(HttpContext context) { } #endregion }
NOTE: I have not made any request for the handler via url, it is just not letting me run application.
I've inherited some code that is having a serious problem. On one page, there are several pairs of "Yes"/"No" checkboxes that act like pairs of radio buttons through the use of the ACT MutuallyExclusiveCheckBoxExtender control. They work as expected. However, when I navigate away from the page, I get a "Microsoft JScript runtime error: Sys.InvalidOperationException: Handler was not added through the Sys.UI.DomEvent.addHandler method." error in the dynamically-generated ScriptResource.ax...c2d9970 [dynamic] file.
The specific method in the dynamically-generated code is: var $removeHandler = Sys.UI.DomEvent.removeHandler = function Sys$UI$DomEvent$removeHandler(element, eventName, handler)
The element is set to any of the checkbox controls (I've removed them one-by-one and it happens to ALLof them) and the eventName is "Click". I gather from the code that it's trying to do a removeHandler before the addHandler for the particular element has taken place. True, I don't have any explicit addHandler lines in my code, but I don't any explicit removeHandler lines either. About all I've got in the aspx code is: [Code] ....
The formatting of the code in this message is a bit weird, but it's basically a simple table with three columns. On each row, there's text in the first column, the checkboxes in the second column and a button in the third. I've searched high and low on the web and nearly every thread I read about his error talks about it in relationship to the use of command buttons in an ACT UpdatePanel.
i have the following code in my global.ascx and when i click a generate error button the code gets run but seems to fail on the insert error into the DB.
I want the error to be saved to the DB and redirect to default.aspx.
pretty standard stuff.
the error i get is: exe.Message = "Incorrect syntax near 'System'." (looks like somethign with the SQL objects used in global.asx)
void Application_Error(object sender, EventArgs e) { // Code that runs when an unhandled error occurs Exception ex = Server.GetLastError(); StringBuilder theBody = new StringBuilder(); theBody.Append("Error Message: " + ex.ToString() + "
I have an area named CMS on my MVC3 Preview 1 application.Is it possible to have an error view inside the CMS area to display only errors that occurred on the controllers under the CMS area?Basically I want the errors inside the area to be handled by a different controller than the errors on the "application root".
i hv added a treeview control on the .aspx page, when i try to browse it from web server, the image is showing as broken image, where the image link is showing like this [URL]
This is really weird I am really stuck on this issue. Now the Environment is WIN2K3 Server is my web server Database is SQL 2008 is in the domain itself I have deployed the application which was using the SSO from the parent Share Point Site and was having forms authentication Now the Users to access the application can be outside domain /inside domain so we have logic to get the internal employee or external But the Problem starts when we have got the request to have the application ready for Internal Users like a Intranet application and we need to have the windows authetication in place Now the problem was with WINDOWS authentication I am not able to get to the HTTP Handlers I have in my code thats really wierd as all was working well having the forms auth. I have changed the following things to make it windows auth. Changed the AUthentication in WEB.Config Unchecked the Anynomous user from Directory Security in IIS.
My Problem is ALL application works well except when I tried to call http_handler It is giving me 404 0 2 in IIS logs page not found when I tried to say window.location = "myhandler.myextension?id=285dc559-8293-44f3-a018-4e7024c82e5b" Gives me Page not found error.
Protected Sub btnClick_Click(ByVal sender as Object, ByVal e As System.Web.UI.ImageClickEventArgs) Handles btnclick.click
Dim sb as New System.Text.StringBuilder() sb.Append("<script language='JavaScript'>launchExecutable('") sb.Append(path) sb.Append(" 2 ") sb.Append("</script>);") ScriptManager.RegisterStartupScript(btnclick, me.Gettype(), "btnclickform", sb.ToString()) End Sub
This is a cut down version of my code, but I'm running this on a TabPanel, so it sets on an Update Panel. If I run this code on a standalone aspx page it works...in other words, without the TabPanel. However, I need it to work on a TabPanel. This is the errors I get: Microsoft JScript runtime error: Sys.WebForms.PageRequestManagerServerErrorException: The script tag registered for type 'ASP.client_default_aspx' and key 'btnclickform' has invalid characters outside of the script tags: );. Only properly formatted script tags can be registered.