Configuration :: Page Using Validation Throws WebResource.axd Error
Mar 3, 2011
I have a simple textbox and button on a page using validation, like so:
<body>
<form id="form1" runat="server">
<div>
<asp:TextBox ID="TextBox1" runat="server"></asp:TextBox>
<asp:Button ID="Button1" runat="server" ValidationGroup="TestV" Text="Button" />
<asp:RequiredFieldValidator ControlToValidate="TextBox1" ID="RequiredFieldValidator1" ValidationGroup="TestV" runat="server" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</div>
</form>
</body>
[code]...
View 1 Replies
Similar Messages:
Apr 30, 2010
I have introduced site wide exception handling on my site to catch unexpected errors. The event handler sends a message to me when such an exception occurs. But the problem is that any clicks on my site will cause an exception to be thrown with the message: "This is an invalid webresource request."
I googled for an answer and only found a couple of references to 1. setting a fixed machinekey (which for some reason didn't work for me, I got an error saying that the virtual directory wasn't set in IIS, and as far as I know I'm not using IIS at all, I'm using the local development environment and then deploy to a web host) or 2. using a robots.txt file to stop robots from accessing the axd files, but that doesn't help either because it's not robots that cause the problem, anyone clicking around on the page will cause this error. how to solve this problem properly? For now I have handled it by catching and ignoring this particular error by the text in the error message, which works but I would rather fix it so that this error doesn't occur at all.
[Code]....
View 1 Replies
Jul 6, 2010
I recently installed VWDE 2010 and SQLE 2008 R2 and have built a basic site, but when I try to launch the Web Site Administration Tool, it fails to come up in a browser window. The server starts and I can right click on that and choose "Open in Web Browser", but when I do that an error message immediately shows up saying, an error was encountered. Please return to the previous page and try again with no other information given. When I click on "How do I Use this Tool?" in the top-right corner of the window, it immediately says the following:
Tool Has Timed Out
As a security measure, the Web Site Administration Tool times out after a period of inactivity. Changes to machine.config or web.config may also result in the tool needing to be restarted. To continue configuring your web site, restart the tool. The same message immediately comes up no matter what tab I click on. I have searched the internet and have made sure that the path doesn't have any spaces or non-alphabetic characters, run aspnet_regsql, restarted the IDE as well as the computer, but nothing works.
View 5 Replies
May 9, 2010
I have a problem in my web site ...
When ever i left my website idle ...
The following message is displayed ...
After this message is displayed , no pages is able to access ....
The error message is :
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster
View 2 Replies
Mar 3, 2010
I've got customErrors set in my web.config
XML Code:
<customErrors mode="On" defaultRedirect="/Error/GeneralError">
<error statusCode="404" redirect="/Error/NotFound"/>
</customErrors>
This works fine locally. A 404 throws a 404. On the shared hosting it throws up the standard server 404 page unless I specifically set 404 to point to /Error/NotFound. That's fine. Now it will show the custom 404 page except the response status code is 200. So if I try to throw Response.StatusCode = 404; in my NotFound action in ErrorController like this:
Csharp Code:
[code]....
the server throws a status code 500 Internal Server Error but my GeneralError page doesn't show, just a blank white page with no source.
I've tried many different combinations but I can't seem to find how to make it show my custom 404 page along with a 404 response.
View 11 Replies
Feb 25, 2011
I have an ASCX control which is a special dropdownlist. I add that control dynamically to the page and fill it with data. This control has a postback that will change the contents of a second dynamically created standard dropdownlist.
When I change the selection on the first dropdown, the indexchanged fires and I get new data and attempt to place it in the second dropdownlist's items collection, by first clearing it then filling it with new data.
This works fine the first time a change the selection, but when I select a second time the following error is thrown:
The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request.
I'm not adding or removing new controls in the fired event, only changing data. And again, it works the first time, but doesn't subsequent times.
If I disable stateview on the child control, then the control just doesn't get updated with data at all.
View 1 Replies
Jan 24, 2011
Looking for advice on how to troubleshoot an application (not something I wrote) that is on the old 2.0 Framework. It acts "crazy" sometimes when selecting an item from a drop down list. Sometimes the page will reload like it should on the post back with the new data, while othertimes, it just throws a Page Not Found error. What's the best way to troubleshoot and eliminate the various variables of IIS6, 2.0 Framework, SQL Server, the VirtualMachine, etc.
View 3 Replies
May 16, 2010
I have published a website and installed it on my local machine and it works fine, but when i install it on the both servers who controlled from the load balancer i got an error like the WebResource.axd not found. how can i resolve this problem? i have checked the IIS for axd mapping, the "Check that file exists" is unchecked for both servers.
View 2 Replies
Mar 2, 2011
[Code]....The WebResource.axd handler must be registered in the configuration to process this request?
View 4 Replies
May 7, 2015
When i keep the .aspx page open or iden for long period on browser and then clicks on button after some time , it shows me the
error as "Validation of Viewstate MAC failed. Auto generate cannot be used in cluster."
how should i avoid this... ?
View 1 Replies
Jul 12, 2010
I have a site that uses the Ajax Control Toolkit that's been running for several weeks and a week ago all of a sudden users are seeing script errors. I'm getting 'Sys' is undefined errors, as well as 'object required' and other JavaScript exceptions. The site does not function because of this.
I checked the page source and looked for the WebResource.axd and ScriptResource.axd's and tried navigating to them directly by putting the URL in the browser. I got a 404 error - file not found. If I do the same in our test environment, it comes back and asks me if I want to save or open the file. If I open it, I see the JavaScript that I am expecting (from the Ajax Control Toolkit).
In our test environment, with the same code, everything works fine. This tells me there was something on the production server that's preventing this from working. About 4 days before this started happening, we found that some user documentation (PDF) wasn't being protected by Forms Authentication (we need only legitmate users having access to it) so we added a wildcard mapping in IIS with "verify that file exists" was unchecked, knowing that if it were checked, we'd have this problem. I had one of the network admins check this setting after this started happenig and he said that it was still unchecked. I asked him to remove the wildcard mapping altogether and I still see the same behavior.
I am certain that this isn't a coding problem; again, as it went through the QA process in our test environment, everything works perfectly. And after the last deployment to production three weeks ago, everything was perfect as well. We added the wildcard mapping (which shouldn't have had an effect) and four days later the site breaks. I've asked our IT department if any changes were made to the server recently and nobody says they did.
What settings does anyone know of that might be causing this, either server or application? I checked the web.config and all the sections are there that deal with the ScriptResource HttpHandler and HttpModules. In fact, the web.configs are identical between the production and test environment, so I know it hasn't been tampered with.
View 4 Replies
Dec 7, 2010
I migrated an ASP.NET 3.0 application from one web server to another. The only difference that I know of between these webservers are, one is running II6 and the new one (the one this app was moved to) is running IIS7. The application was running fine in it's old environment, no code changes were made, but now it doesn't seem to like the web.config. I get the following error:
[Code]....
View 1 Replies
May 16, 2010
We Installed new application in our dedicated server. I struggle with an issue for the last few days. I get 404 no found in all WebResource.axd requests.
I have uninstall and install .net 2.0 - I have .net 3.5 installed as well. using webresource decrypter I found that many JS files, such as WebForms.js generate the erorr.
I check the iis handlers mapping for .axd
I disable http comp.
View 1 Replies
Jan 30, 2014
if my website when session of user expire i get the following error.
Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.
My website is in vs3.5
View 1 Replies
Mar 15, 2010
I have web projects build in VS2003/1.1 framework and deployed in a webserver with IIS setting specified to 1.1 framework.lets say project X
I also have another web project which is build with VS2008/2.0. IIS setting - ASP version 2.0 is selected and all pages are assigned to run with 2.0* dlls. Lets say project Y
Now the problem seem to be when I hit project x, sometimes it throws errors like "error BC30456: 'Initialize Culture' is not a member of 'ASP.**"
During troubleshooting this issue, I browsed through 2.0 Temporary ASP.Net files "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files" and found temp files generated for project X. (HUH?)
How/why 1.1 project gets compiled in 2.0 only when it errors out.( or we could put it this way that it errors out every time it gets compiled in 2.0 which it is not supposed to)
I'm confused as to why this is happening when project X has nothing to do with .net 2.0.
Adding this info:
IIS version 6.0
I forgot to mention that project X works 95 percent of the time without any errors under 1.1. This error throws randomly which we could not recreate. The time the project error out is at the same time it gets compiled with 2.0
View 2 Replies
Oct 20, 2010
Having big problems with a stored procedure I'm trying to write. It seems really simple but when I try to execute the procedure it throws an error.
Here is the proc:
[Code]....
[Code]....
View 6 Replies
Sep 28, 2010
I have some code which fills a dropdownlist:
pn.DataSource = Datatbl.Tables["datalist"];
pn.DataValueField = "partnumber";
pn.DataTextField = "partnumber";
pn.DataBind();
pn.Items.Insert(0, "");
pn.SelectedValue = ligne["pn"].ToString();
and when the value in the Database in null (""), it throws this error: ArgumentOutOfRangeException: 'pn' has a SelectedValue which is invalid because it does not exist in the list of items. Parameter name: value
View 2 Replies
Mar 29, 2011
I am using a Datapager in my project with a ListView control. The Datapager is set to use a querystring value Page, so that a typical URL looks like: [URL]. The problem is that the ListView throws an ugly error if the pageview is invalid (0, for example).
The error is:
Specified argument was out of the range of valid values.
Parameter name: startRowIndex
The error originates in the ListView SetPageProperties method. What is the best way to address this? Can I override the SetPageProperties method in some way, to check the startRowIndex parameter? Here's a very simple page that replicates the error: [URL]. A copy of a simple webapplication project demonstrating the error: [URL]
View 1 Replies
Feb 23, 2010
I am running through this tutorial on ASP.NET MVC: [URL] Everything seemed to be going fine. I created my DB, created my Model classes, created a controller class and then started creating some Action handlers. When I finally created the page that submits updates to the DB, I got the following error:
System.NotImplementedException: The method or operation is not implemented.
Line 49: public void Save()Line 50: {Line 51: db.SubmitChanges();Line 52: }
when I call the "SubmitChanges()" method of the DataContext class. I tried recreating my DBML file from my tables, but I still get the same error.
View 2 Replies
May 18, 2010
just added reference to jquery minified and block ui on my page through scriptmanagerproxy and it throws error on page load.
<asp1:ScriptManagerProxy ID="ScriptManagerProxy1" runat="server">
<Scripts>
asp:ScriptReference Path="~/script/jquery-1.2.6.min.js" />
<asp:ScriptReference Path="~/script/jquery.blockUI.js" />
<asp:ScriptReference Path="~/script/Default.js" />
</Scripts>
</asp1:ScriptManagerProxy>
View 10 Replies
Oct 20, 2010
I added a service reference via the add service reference method. I can see all of its services in the intellisense but when I run the project and it executes the line where I instantiate the service : MyProjectName.ServiceReferenceName.IServiceReferenceClient
client = new MyProjectName.ServiceReferenceName.ServiceReferenceClient;it throws this error:Could not find default endpoint element that references contract 'ServiceReferenceName.IServiceReferenceClient' in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element.
View 2 Replies
Dec 1, 2010
I have a conditional statement running on my aspx page which looks for a value from a static property (i.e. the object should not need to be declared).
[Code]....
This is the error that is thrown: "BC30451: 'CurrentSession' is not declared. It may be inaccessible due to its protection level."The class is public and to make matters more confusing, it works fine in certain environments but blows up on some.
View 3 Replies
Jul 9, 2010
I am using AS 400 OLEDB with .NET. It uses '?' instead of '@param to bind parameters with a commandNow there is a situation where the command is like
SELECT ...
FROM
(SELECT ...
ROW_NUMBER() OVER(ORDER BY ColumnName) as RowNum
FROM Employees e
) as DerivedTableName
WHERE RowNum BETWEEN @startRowIndex AND (@startRowIndex + @maximumRows) - 1
Now my command becomes
SELECT ...
FROM
[code]...
View 1 Replies
Jun 24, 2010
Here is how my 2 projects are
I have a class library project which consumes multiple webservices. I have created a test project in VSTS and try to call one of those service
But I'm receiving System.ServiceModel.EndpointNotFoundException. In my Test Project I have added one app.config file and added endpoint as available in my Serviceclass library project app.config.
View 2 Replies
Jan 20, 2011
I've got a Dropdownlist with CategoriesI've also got a Listbox with Items filled using the selection from the DDL (autopostback=true).I have a SQLDataSource for each one.the DDL populates perfectly. the listbox SQL DataSource uses a stored procedure, that, on its own works perfectlyIt works well just as outlined above. However, when I add the following properties to the DDL, I get an error:
appendDataBoundItems=true and '--Select--' (tried 'Select' also) as an item
the error is:Input string was not in a correct formatI also set up the sqlDataSource selecting event handler, so that it would check for 'Select' first, but it bypasses that handler when debugging, and goes straight to the error msg
View 2 Replies
