I have an ASP.NET page written in C#:
[Code]....
I want to be able to hide some of the listitems, however there is no option to do this as I am only able to disable them.
I have read somewhere on the web that you can do this but the code is in VB :(
After after a solution in C#.
Here's my radiobuttonlist:
<asp:RadioButtonList ID="Pending" runat="server" AutoPostBack="True" OnSelectedIndexChanged="Populategrid">
<asp:ListItem Value="250">Over 250</asp:ListItem>
<asp:ListItem Value="300">Over 300</asp:ListItem>
<asp:ListItem Value="350">Over 350</asp:ListItem>
<asp:ListItem Value="400">Over 400</asp:ListItem>
</asp:RadioButtonList>
I have a gridview set up to bring in all of the items listed in the radiobuttonlist. When the page loads the first time it comes in as showing Over 250 only:
Private Sub GridView1_DataBound(ByVal sender As Object, ByVal e As System.EventArgs) Handles GridView1.DataBound
GridView1.Columns(2).Visible = False
GridView1.Columns(3).Visible = False
GridView1.Columns(4).Visible = False End Sub
This is the code behind:
Protected Sub PopulateGrid(ByVal sender As Object, ByVal e As EventArgs)
'Select Case Pending.SelectedItem.Value ' Case "300"
Dim conn As New Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings("PendingClaimsConnectionString").ConnectionString)
Dim cmd As New Data.SqlClient.SqlCommand
[code]...
I'm getting an error under the If pending.selected value = "300" and .Parameters.AddWithValue etc...saying operator AND is not defined for types Boolean
Private Sub GridView1_DataBound(ByVal sender As Object, ByVal e As System.EventArgs) Handles GridView1.DataBound
GridView1.Columns(2).Visible = False
GridView1.Columns(3).Visible = False
GridView1.Columns(4).Visible = False End Sub0
[code]....
I have a tag:
<asp:ListItem
CssClass="LabelCSS">Executive</asp:ListItem>
and I am getting the error message
Validation(ASP .Net):Attribute CssClass is not a valid attribute of element ListItem.
What attribute would I use for Css with ListItem?
I have a master page wich contains
[Code]....
I want to make this invisible on the contact page. Is there a way of doing this without using a sepearte Master page?
I've two radio buttons in my web site for selecting sex, one s for Male & another s for Female, Problem is during the Run time, I was able to select both the Radio Buttons, but as per my need i should select only one radio button. And i should perform validation Wn user not selected even one radio button i should show the error msg, like " select sex "
View 8 Replies i have a table which looks something like the following
<table id="Table1" border="0">
<tr>
<td><b>1.</b> Question 1</td>[code]....
how do i go about looping through each group of radio buttons and getting the text of the selected radio button ?the code displayed above is created dynamically ... in my aspx file i have the following code
<asp:Table ID="Table1" runat="server">
</asp:Table>
Using jQuery I want to be able to click an element which will also checks it's related radio button. I had this working fine until we had to add runat="server" to the radio buttons.When I apply this it prevents my jQuery function from working how to get round it, heres a simplified version of the code:HTML
<input type="radio" runat="server" id="sector1Radio" name="SectorGroup" title="Sector1" />
jQuery
$('#SomethingElse').click(function() {
$('input[title=Sector1]').attr('checked','checked');
});
I've found out that when its converted to a .net control instead of checked="checked" (as it would be usually) it is just Checked, so I changed that but on inspecting the DOM in multiple browsers, none of my radio buttons are being checked(Are there any other ways I can use jQuery to check a radio button that has runat="server"?
I have a web application that shows a page containing between 6 and 20 AJAX UpdatePanels, contained with Custom Web (.ascx) Controls.
You can see an example of such a page here:
[URL]
The problem I'm getting is that when the user FIRST clicks any of the radio-buttons on any of the controls in the page, ALL the radio buttons that have an active selection ALSO fire an rb_CheckChanged event (see application log below). On subsequent radio-button
clicks, only that RB fires the event (as expected).
This behaviour is having a dramatic impact on performance. The page loads quickly, and a "normal" RB click provides an AJAX update correctly within 1 second. The problematic first RB click, however, takes up to SIX seconds to process, which is unacceptable from a user experience standpoint.
Developed in VS.NET 2008, ASP.NET 3.5. Also I converted the "Web Site" solution to a "Web Application" (pre-compiled) and got the same performance (still too slow). Release builds run only marginally faster than debug builds.
Why would a single RB selection change cause all RB's that have a "selection" set on them to also fire? (The "selection" is determined through database settings every time the control is populated, which is called from within the parent page control's Page_Load function. This selection is determined also at first page load, since all the controls get populated then, so why would the clicking of an RB cause them all to fire an event, and only once? That's what I don't get...)
Not sure if this is an AJAX issue, or general ASP.NET UI issue, so I'm posting in two forums on this one.
I have the following code<asp:RadioButton runat="server" Text="Male"></asp:RadioButton>I want a gap between the radio button and the radio button text, I made the following changes in the text field(prefixed a space) Text=" Male". However, I don't feel this is the most efficient way.
View 1 RepliesI am using CSS for menuing, and as long as I use the "<a" tag and hyperlinks, I have no problem. But when I try to place a button I get an error. What is the trick to getting a button to work as a list item?
I need to do a postback when clicking particular navigation buttons and the hyperlink doesn't do that so I want to place a button there.
I have 3 tabs with 3 seperate gridview and radios buttons in them. Each page has a seperate submit button, but for some reason each pages submit button is validating all the radio buttons on each tab, i picked the seperate controls to validate under but on any submit theya re all validated instead of just the ones on that tab.
[Code]....
I have a databound Gridview (with a LINQ datasource). The gridview displays questions from the SQL DB to the user. I've inserted a radio button list into the gridview with 3 horizontal radio buttons with fixed values of 1,2,3 for the user to select. I have a question ID, a tempuserID, and AnswerValue columns set up in the database. It all works nicely.
After the user selects radio buttons, I would like for them to push a button to submit the QuestionID, the associated Radio Button Value (AnswerValue) and their tempUserID into the DB. How do I do this? I'm not sure what to do next and what VB/LINQ code to put in the code behind file in the button click event handler. I'm also not sure on what to use for the tempUserID, can I use the sessionID? I'm using VB and here's my code:
[Code]....
I have this code
protected void Page_Load(object sender, EventArgs e) {
if (!IsPostBack) {
ArrayList olist = new ArrayList() {"visible", "invisible", "visible", "visible", "visible", "invisible", "visible", "visible", "invisible"};
for (int i = 0; i <= olist.Count-1; i++) {
if (olist[i].ToString() == "visible" ) {
[Code] ....
I want to hide the button if records found "invisible".
The output must be like this:
-----------------------------------------------------------------------------------------------------
Another question is
I want to get the button index value inside the repeater row, when the user click the button the index value display one Label3
void repbtn_Click(object sender, EventArgs e) {
Label3.Text = "The button item index that clicked in the repeater is: "; // + irepeater.Items. ;
}
i have a web page in which i place radio button list, when i select any radio button, on printing i get light color for selected radio button, how i get selected radio button dark colour so that it can visible easily..
View 13 RepliesI have a requirement that generate radio button dynamically in the code behind view.
While i am giving the id value of the radio button it will generate automatic id value like this
"ctl00_cphContent_rbVeryPoor5_1" But i am setting only "rbVeryPoor5_1" (while i am viewing in the view source)
[Code]....
[Code]....
I have some radiobutton in my page that users can checked.I want when users select radiobutton they can deselected them now they can just select radiobutton i want do some thing like checkbox that users can checked it and if they didn't want they can deselected them.
View 1 RepliesI have problem when resetting the radio button.
3 radio buttons with search option and a reset button.
When clicking reset buttion , I will select the first radion button and reset the system. But the functionality is working based on the first radio button, but its not checked. It is checked in the previous state. check in the below website.
[URL]
Click on "Add stuff" , Then search widgets , here you can see the section what i said before. click on the search , you can see the list of widgets and select the "My widgets" and click search , you can see "No widgets found"... now when you click the reset button you can see the list of widgets which are related to the first "All Widgets" radio button,but the radio button is still in the previous state even though i set Allwidgets.checked = true; May i know why its not working?
I Have few radio buttons which are grouped together, and i want to reterive their values.But i am not sure how can i do that.
View 2 RepliesMy web page has one radio button and three sub radio buttons. When I click on Main Radio button, I am enabling the sub radio button using Javascript, and user can select the options. Now the problem is, when I click on submit on this page, I am unable to get the selected radio button. i.e., Suppose if I select 1st sub radio button and click on submit. I am checking in the code for sub radio button selection, I am getting no radio buttons are selected. The above condition is for first time only. Now go to another page and traverse to the page again, I am successful, i.e., I am getting the selections properly.
View 8 RepliesI have a group of two radio buttons and I would like to set the state of them in my code-behind page. I can do this quite simply by setting the checked state of each (e.g. RadioButton1.Checked = true; adioButton2.Checked=false;) The problem I'm having is that the state of the buttons on the screen is not updated until I navigate away from the page the buttons are on then return to the button page. Question: how can I make the button checked appearance change from the code on the server?
View 4 RepliesHow to set Radio button property corresponding to Database value?
View 2 Repliesi just want the RadioButtonList without the radio button on it, i will code the rbl so that selected items have a different background color and make it look more professional, the radio buttons themselves i want to be able to get rid of in terms of appearance...
View 13 Repliesi have a radio button on the left of the HtmlTable and if Select the Radiobuton it should change the Hole Row Color but not the one where the radiobutton is in?
View 2 RepliesI have a RadioButtonList that's dynamically filled with different sized items. The problem is that some items are separated from the actual radio button to a different line. I've figured to use to keep the words together but can't find any attribute or trick for the current problem.
View 5 Repliesi have a Radio button i html table via System.Web.UI.WebControls. in the first colom is the Radio Button , and checkbox in each colom to the right, what i want is when i click the radio button it should check all the checkboxes
View 11 Replies
