Does any one knows how i can configure IIS on windows 7 ultimate for receiving mails from my domain via my hosting provider?(not for SMTP because i know how this works...but for pop mail.mydomain.com)If this is not posible does any one knows what programm i need to install so that i can receive and diliver these mails?Must i install a external mail server?
View 2 Replies
I have two sites: a site written in vb (site 1), a site written in C # (Site 2).
Site 1 running on a primary domain, eg http://abc.com. site 2 run as sub domain, eg http://site2.abc.com.Now I do not want to run the site 2 as a sub domain 2 again, which would put it in a folder of the site 1, for //abc.com/site2/Default.aspx.So now we have to configure in a site how to run the site 2.
I am working on windows Mobile 6. I have created Mobile Application which is receiving data from webservice. Web service is working on Development End and also in UK on Mobile Device. Same application is tried from Dubai to recieve same data but an error occured to receive data. What could be problem? Application from Dubai is accessing My PC service but server at Germany is not accessible. Is there ant blockage issue from server to specific Global IP. User is accesing using Wi Fi.
View 1 RepliesI am sending mails from ASP.net application does the same way can i receive mails from other recipients. how can i achieve that.
View 2 Repliesmy all mail come in spam folder ..
View 1 RepliesThe following code works as it was originally designed to move a file from one directory to another directory on the same server, but I need to change it to work so it will move a file from one server to another server. My challenge is how to define the source directory on a different server and check if file exists.
Code behind:
Protected Sub btnSubmit_Click(ByVal sender
As Object, ByVal e As System.EventArgs)
Handles btnSubmit.Click
[Code]....
[Code]....
then i got a message about a better way using net.mailmessage insted so i did, and i used this (i did set user name and password)
and it just wont work
[Code]....
I Need to make an application that reads an email automatically (when there is an new email) and delete it afterward , those emails have an attachement that i want to use later.
View 2 RepliesI want to sent mails from my application, from address may be any domain and to address also any domain.But in my application i already registered my domain name(mail.bsl.co.uk) in web.config file.the mails are going from that domain(xyz@bsl.co.uk) to other domains.But i want to sent mails from gmail,yahoo etc to other domains.
View 1 RepliesI have a requirement of sending 3000 Emails one by one with an attachment of around 100KB, I was using System.net.mail namespace with our company mail server.my program will send upto 360 mails after that it is not sending emails,and it is not giving any exception.what is the solution to my problem.
View 13 Repliesi am working on a project which needs to send mails. it is still under development.
can any one guide me how to setup smtp server (IIS 5) to send mails and code to send mails as well. this is all for testing only.
I just want to ask you how to distinguish the mail between read & unread. Just like in some mail services the read mails are displayed in regular font & unread mails are displayed with bold. I want to know how to do this.
View 1 Replieswhy sometime mail go to spam folder and take lots of time.
View 1 RepliesHere is the situation,
- a user submits a form from cfm page, then cfm page transfers data to asp.net(C#) page
here is cfm form tag
<form name="form1" action=[URL]
method="post" target="_blank">
<input name="fName" value="Hello" type="text" />
<input name="LName" value="World" type="text" />
</form>
How can I write asp.net c# to get inputs from cfm page?
I wrote a webservice that returns an array of Strings. Below is the code for the webservice:
WebMethod()> _
Public Function CheckNotices(ByVal UserId As String) As String()
' Dim time As String = Now.Date.ToString
Dim dt As New DataTable
Dim ob As New BLL.ClsBLL
[Code]....
I have an application that needs to post data to a url on the web and then receive an xml response. I have an HTML form (provided by vendor) that posts the data correctly, however when clicking the submit button the page is redirected to the post url and the xml is displayed in the browser. I need to do this on a postback within an existing asp.net project. Basically, the user will fill out the form, the form data will post to the url, the xml response will be received, and the appropriate values will be displayed on the screen. I've found a bunch of examples for doing this but I just can't seem to get my head around it. Can anyone point me in the right direction or explain how I should go about this?
View 7 RepliesI am receiveing this error. On this line:
DataRow dr = GetCurrentEvents(int.Parse(Request.QueryString["ScheduleID"]));
ScheduleID is an int in my stored procedure. SoI inserted the (int.Parse) But now I get that error. How can I convert an int into the QueryString.?If I take out the (int.Parse) The method I have calling the above. Its something like:
private DataRow GetCurrentEvents(int ScheduleID)
{
some stuff
}
If I change it to (string ScheduleID). I get a different error bc I'm trying to convert an nvarchar to an int...
I have also installed SSL on a subdomain. I have put payment page under this sub domain.
View 4 RepliesMy feeling says it's not posible but anyway I am curious if there is at least a workaround for accomplish this.Basically I am working at my client site and my machine is not connected to the domain.What I want to do is running a web application locally under a domain account, and using the webdev server.The webapp uses the default authentication, windows authentication that is.I tried using impersonation with domainuser & password but I got the following error Could not create Windows user token from the credentials specified in the config file. Error from the operating system 'Logon failure: unknown user name or bad password.I have to mention that the username and the password are correct.
View 1 RepliesWe have a ASP.NET site that partially depends on forms authentication for login credentials, however the implementation of IPrincipal is completely custom.
But, when running the site on a particular server (which is somewhat semi-hardened when it comes to security), the app crashes when invoking IPrincipal.IsInRole() with the following messsage:
System.SystemException: The trust relationship between the primary domain and the trusted domain failed.
This indicates a communication error between the web-server and the DC, however since our application doesn't at all utilizes Windows authentication, I don't see why it needs to communicate with the DC.
This is my implementation:
[code]...
EDIT:
I was finally enable to reproduce this error on my dev-machine (i revoked my machine from the DC yesterday, but didn't reproduce it until today)
HttpContext.User is actually a WindowsPrincipal by default it seems, and the error in my code was that I only replace it with CustomPrincipal upon login. Hence, unathenticated users still get the WindowsPrincipal which then fails horribly if you have trust issues on your AD.
I tried changing the default principal by invoking this on appstart
AppDomain.CurrentDomain.SetPrincipalPolicy( PrincipalPolicy.NoPrincipal);
But this doesn't seem to kick in. How do I change the default Principal in ASP.NET?
Im returning the username from sharepoint site as a string. This is done successfully with the below code but I also get the domain with it. How can I only return the username and not the domain either through sharepoint or programmatically removing it? domain/username
[Code]....
My feeling says it's not posible but anyway I am curious if there is at least a workaround for accomplish this.Basically I am working at my client site and my machine is not connected to the domain.What I want to do is running a web application locally under a domain account, and using the webdev server.The webapp uses the default authentication, windows authentication that is.I tried using impersonation with domainuser & password but I got the following error Could not create Windows user token from the credentials specified in the config file. Error from the operating system 'Logon failure: unknown user name or bad password.I have to mention that the username and the password are correct.
View 2 RepliesI have two domain servers X and Y.My Asp.net Web application is hosted on Domain X.But my scope is required to authorize the user of Domain Y on the Web application hosted on Domain X server.I am using Windows Authetication mode in application
View 2 RepliesI have a main domain "mydomain.com" and then a sub domain "forums.mydomain.com". If a user visits "forums.mydomain.com" without being logged in, they are redirected to "mydomain.com/login.aspx".
The two scenarios are:
If they are redirected to the login page with "mydomain.com/login.aspx?ReturnUrl=http://forums.mydomain.com", then they are succesfully logged into the forums but NOT the main site.
If they are simply redirected to the login page with "mydomain.com/login.aspx" with no returnUrl, they are correctly logged into both the main site and the forums.
In a page , when I click a button 'showDialog' I am loading the user control dynamically in a dialog. I am linking to the event in the user control as explained below. The parent page is not receiving this event.
Button_Click(){
UseControl1 gc = dlg.LoadContent(:UserControl1.csx);
gc.CausePostback += new EventHandler(execute_CausePostback());}
execute_CausePostback(){
In UserControl class after clicking the submit button
Submit_Click(){
saveRecord();
raise event CausePostBack();
