Web Forms :: Page Is Refreshing Inside Update Panel
Jul 28, 2012
I have added update panel and gridview in my page. When I click on any Image Button which is in Gridview, the page refreshes at that time. I don't want my page to refresh.
I have 4 Image buttons on my user control and on the click of that Image button, I am opening new pop up window. I had used update panel but still it is refreshing the page. I don't want to refresh my page on the click.
I'm manually triggering an update panel refresh using javascript (long story- but it has to be this way), but I still see a page flicker outside of the update panel, so I'm concerned that the whole page is getting refreshed rather than the update panel. Any way I can determine this? Perhaps some value in the code-behind on the postback? Or some client side trick? If the jQuery $(document).ready() event fires, does that mean the whole document is refreshing or just the update panel?
I'm trying to show some data in the update panel refreshing every second using page method. Everything works fine until I introduce Session. As soon as I save some data into the session my Ajax Page method is not called every second. Here is the complete code
Test.aspx
[Code]....
Test.aspx.cs
[Code]....
why after clicking "Enable Session" button refresh stops working?
I have a data grid and and bind a column a Dropdownlist. when i select the Item of Dropdown list the page is Refrehed. How can i stop this. I dont want use Update panal.
I have two gridviews tied to a SQL backend both being displayed within an update panel. Both the gridviews have a linkbutton connected to a rowcommand. When clicking on one of the rowcommand link buttons, the database is updated and the update panel is refreshed (moving the record to be displayed in the other gridview in the panel). However, when the rowcommand from the other gridview is clicked, the code is run and the database is updated, but the update panel is NOT refreshed.I have debugged it and have found that the code is running as expected. It fires off the function and updates the database. If I click away from the page and then go back, it does show the data in the proper gridviews, so I know that the code is working.
The update panel in the shrepoint master page is updating only once. I have a simple ascx control with lable and button in the update panel. when the button is clicked the label text dispalys random number. but this is only working once. the second time when i click nothing is happening.
In my application, I have a list box(list of stores), Add and Remove buttons and another list box (selected stores).
I have Following requirements:
1. On click of Add button, copy selected items from the master stores list to the selected store list and clear the selection from master store list.
2. On Click of Remove button, remove the selected stores from the selected stores list.
I have added my master store list box and selected store list boxes to 2 different update panels and added triggers for each of the update panel. Things are working fine but one thing I have observed that it is taking unusually long to move selected stores from master list to selected list. I have around 5000 entries in the master list of stores.
If I remove the update panel for master store list, things are normal but I am not able to clear the selection. Am I doing something wrong? Is there a way to clear selection of listbox outside the update panel.
I am having this update panel page refresh problem with Firefox 3.6, not sure if anybody else has seen it.
It happens to me on pages with multiple ASP update panels. For example, I have two dropdownlists nested inside one of the update panels, and those dropdownlists do allow AutoPostback. For whatever reasons, it triggers other update panels to refresh even though it shouldn't. It only happened in Firefox 3.6, I haven't seen it in Firefox 3.5.x or Chrome or even IE 8.
I've a tab container with 4-5 tabs on a page. On the same page, I've three update panels - one outside tab container whilst the other two lie inside two tab panels separately. Update mode of all three update panels are set to Conditional. There is a timer in the first update panel (the one outside tab container). Whenever timer ticks, the other two update panels are also being refreshed. How can I stop this?
In one of my webpage, I have a parent window where i have a datalist with 10 rows of images. when i click any image a pop up window(child window) opens.
The child window has a form to be filled by user. Once user fills this form, he will press the save button. Once the save button is clicked, the child window should be closed and the datalist(in the update panel) in the parent window should be refreshed.
This is how I am trying to achieve this. On click of the save button a javascript function is being called of the parent window like this: window.opener.refreshDataList();
in the refreshDataList() function I have written the following code:
This works like a charm in Internet Explorer. However in Mozilla and Chrome it doesnt work. While testing this I added an alert statement ind the refreshDataList() function like this..
Im trying to make a web chat using ajax control tool kit. There is a script mannager, the update panel and the timer. I inserted the textbox for showing every text that is introduced by the users, the text for writing and the send button are out. It works great but if im writing some text in the exact moment of refreshing time (winch happends a lot because its every 3 sec) it does not let me write correctly cause the textbox kind of blink and you miss a letter. So, wich is the correct method for doing this without lossing the fluidity of the writing.
I have a link button inside an update panel. The problem is the link button on postback is updating the whole page. Tried it with a normal button and the page is not refreshed all. Here's the code.
i want to call javascript function from codebehind using page.clientscript it is working fine if i am not using AJax's Updatepanel,but if i want to use Update panel, but the same time i want to call javascript function from codebehind
i hv a gridview in modal popup,I hv taken checkboxes in itemtemplate and written code in javascript function to checked or uncheck the checkboxes.and in pageindexchanged event calling that javascript function to maintain the state of checkboxes.it is working fine.but when i put it inside update panel nothing is happening.
I have a user control with linkbuttons (used for paging) and a repeater inside an update panel. The paging works correctly, but is causing a full page postback every time I click through to the next page.
The update panel looks like this:
[code]....
So far, I have tried adding an async postback trigger for the user control, which does cause an async postback but does not update the rest of the text in the update panel. In otherwords, the async postback occurs and the next page shows up, but the original text in the repeater is there as well just below it.
I have also confirmed that I have IDS set on my linkbuttons, since that can trigger a full postback inside an update panel.
I have tried changing the update panel mode (Always, Conditional, ChildrenAsTriggers, etc.).
None of it makes a difference - the only thing that actually causes an async postback is to use the trigger, but then the rest of the content in the update panel is not updated, so I get duplicate content.
Looking for the best technique on handling or at least some documentation showing an example.
Starting Page
Gridview control withing an update panel (also various controls used for filtering NOT IN UPDATE PANEL)
Databinding does not happen during page load.
Databinding is initiated when update panel trigger (asp:Button object) is clicked
Hyperlink column is added to returned records
Hyperlink posts to a separate page for detail for record which the hyperlink was clicked.
Second Page
While navigating via the browser back button to previous page (which contained the update panel and gridview) only the (various controls used for filtering) have retained state. The gridview is not shown (which is how the page loads initially when starting) How can I retain the state of the Gridview and add a step in the browser history all together?
How do I conditionally trigger a full page postback from a link button inside of an update panel?
I have a custom control that contains its own updatepanel with a link button nested inside of it. When the link button is pressed I want its event handler to have the option of either letting the control update as normal or doing a full postback on the page.
Here is the control hierarchy:
Page Custom Control UpdatePanel LinkButton
Event handler Pseudo code:
LinkButton Click Handler Begin If is a partial post back AND a full postback is needed Page.DoFullPostback End If End Handler
Note: I aways need the partial postback to happen. I was considering injecting a __DoPostback in the controls markup but this seems hacky to me.
I have a control on a page. In the control's pre-render event I'm executing some code that's taking about a minute to execute. This means the whole page is unresponsive until the control's pre-render event is finished executing.I tried putting the control inside an update panel, but it doesn't matter the rest of the page still won't render until the pre-render event of the control is finished executing. I've attached a very simple example of my code (The event that's slowing up the control's pre-render event is not Thread.Sleep(1000):
I have many controls like dropdown, radiobuttonlist, etc on my page and I put all these controls inside the update panel so that the page doesn't look to be posting back when something is selected. Now the working on the page is very smooth. But the session object isn't getting refreshed even if I postback to the server and as a result even if the users are working on the page they are being sent to the login screen after 20 mins.
Is there anyway where I could put all the controls in update panel and still refresh the session after any postback(dropdown selection)
i have my master page with one update panel working like a banner, so when the timer do tick every 5 sec
the image change. That works fine, but i have an update panel in my index page, this update panel works with some buttons that change the text inside the panel when click.
Now, the problem.
When i click one button to change the text and the banner change, the text returns to his default text. The update in master page is affecting the update on index page.
I've created a multiple uploadfile user control - upload_multiple_files.ascx:
[Code]....
which has an update panel ID = up_upload_multiple_files this user control will be placed inside a modalpopupextender. My question is when I click in any button AddFile, RemvFile, Upload there's a postback so the page is reloaded and the modalpopupextender disapears Is there a way to to troubleshoot this?
I have a literal inside each datagrid item. When the datagrid binds I set the literal equal to a small javascript script (a third party source). It works great. when I update my update panel the javascript is lost. I know this is a known issue. From googling they recommend you use:
ScriptMananger.RegisterStartupScript
However this renders the javascript at the bottom of the page. I need it inside my datagrid items. Is there a way that I can register my javascript to my literal control?