I'm dynamically adding rows at run-time in the Page_Load function as it pulls data from a database to populate them. However, in my "btnSubmit_Click" function, if I call tblMassEntry.Rows.Count, the total is 0.The table is created on the .aspx page.
View 4 RepliesI'm new to the asp.net/vb.net world and have stumbled across a problem.I have a page that has a gridview. When the user clicks on a link in the grid a modal popup is shown (using the AJAX modalpopupextender).On this pop up is a treeview that the user can then select some child nodes.When they click a button a table is dynamically populated with the list from the selected treeview nodes.The user can then add detail in this table comments etc and then should be able to click on a save button. This will then fire the event to loop through the table and insert these records into a database.The problem is that when the Save button is clicked the page seems to have lost all reference to the fact that there are dynamically created rows in the table even though there are a number of rows that you can still see displayed on the page. Even the table.rows.count shows 1 at this point!
View 3 Replieshow to load a usercontrol inside a popUp.
The solution works perfectly except that, after the popup is loaded, when you hit Enter, I want to call the btn_ok (button click event) of the Child.ascx that should MessageBox(the event is fired..) but now it fails to call teh button_Click event.
whole code step by step below:
[Code].....
I've stepped through the code and verified this action. It gets to the end sub and just loops again. Also does it on the production server in IE and Chome (that's all I've tried). Here is the button definition on the actual ASP page:
[Code]....
It goes through the code, sends me an email, gets to End Sub, then loops right back to the top of the sub and goes through the whole thing again, sending me a duplicate email, then exiting normally and sending them to the About page. This is the only code in the aspx.vb besides the class def and inherits statement.
I have a datagrid with checkboxes. User selects some rows and click on a button on the same page.
Code on button_click verify the data for selected rows, It it finds some certain status (Valid), I want a confirmation message to show "You have a or more valid record(s), Do you really want to set inactive?"
Now i user clicks ok, next code should execute else not.
I know attribute.add can not be used because it decides the condition on same button click.
I have a master page and many content pages. In my master page i have LOGOUT button. In the content pages i have many buttons. Now the prob is, LOGOUT button is set to default automatically.. this is very annoying that whenever i wanted to submit the form, i am pressing ENTER key and it is taking me to the login page. So, pls let me know How can i set the particular button_click event to be fired when ENTER key is pressed.
View 10 Repliesi have one datalist and i have taken textbox in headerTemplate of DataList.
i want to get value of that TextBox in Button_click() which is outside of Datalist,
i have used foreach loop for getting textbox value but i m not able to get
I have a page with in a master page. This page has a user control with a text box and a button. I also have another button on the page. As the page first loads the button_click event on both the controls does not fire when clicking the buttons. I also have an event on the enter key on the text box. This event fires which causes a post back. After post back now my button_click event fire. The button_click event does not fire on the first page_load.
View 2 RepliesI am new to asp.net development and I have a employee Web form that is part of a larger wesite. The webform uses a Gridview control which receives data via SQL Server tables so the web form has a SqlDataSource ID="SqlDataSource1" defined. When the page loads, the connection string automatically populates the rows of the gridview (which is a all employees).
I am attempting to create a customized sub search wherein the user can reduce the search to one person by providing either firstname or lastname, department etc within a textbox and then selecting the same from a dropdown list. Finally the user clicks the submit button (which is onclick in codebehind).
When I try to do the above I get "System.InvalidOperationException: Both DataSource and DataSourceID are defined on 'GridView1'. Remove one definition." It seems that once I define the DataSource and DataSourceID in the form, it is illegal for me to do it again in the codebehind. Is there a way to refresh the Gridview that I already have with code from a button_click. I have code attached.
[Code]....
I have a detailsview that is listing a users membership data. userid, username etc... I have the info in template fields. Basically I have also created a button named "Delete User" at the bottom of the page outside of the detailsview. (detailsview is only displaying one user's data). When the button_click event is called I would like to delete the user using the command
[Code]....
Where username is a string I pass through from the detailsview. I am using VB and can't seem to find a way to bring the username value over from the detailsview into the button_click event.
I successfully bind ListView DataSourceID to ObjectDataSource but it binds only initially on Page_Load event.
When I want to bind another data through a Button_Click event, the new data doesn't bind.
aspx code:
[Code]....
Codebehind:
[Code]....
On Page_Load, I get result:
A1
<hr />
T1
A2
<hr />
T2
A3
<hr />
T3
When I Button1_Click, nothing happens, no error, no any more results and _airLineData is 53 records, not 3 records (A1T1 to A3T3) I want the binding to be with DataSourceID to ObjectDataSource (not through DataSource property and control.DataBind() method)
I have the following list of projects WebUI (WebSite) , DataAccess (ClassLibrary) , LogicLayer(ClassLibrary). Those of the project are purposively crated separately.But my scenario is, need to create only one solution file, then add all of the above projects under this solution file. So that i can be easiy interacted and changes can be made by opening solution file only instead of opening each project individually.
Simply all of the layer projects are under one roof means one solution. I tried it by adding solution first, then i added already existed project into this. But once after added already existing project the solution icon vanished by showing the icon of recently added project. By this way I could not add another project into this section too.Hope this is the way the basic real-time projects are created; to achieve the centralized control over architecture based projects.
I want to be able to show the record that was just inserted after add_button_click event. I run the insert from mycommand and then set mycommand2 to run the read to populate a details view. I have a feeling I am going about this the wrong way. The insert fires correctly but the details view does not populate.
[Code]....
I'm going nuts here.. This is what i like to do: When i click my serverbutton i want a fade message to show and then execute as usual all the servercode (db insert and more) i have in my button_click event in code behind. The fade effect works, but the servercode never executes. I don't know how many guides i have tried but it seems impossible to achieve this. I just want to fire the the code in my click_event. I really hope someone of you can point me in the right direction.
This is my fade code:
[Code]....
I am using ModalPopupExtender
as following code.
[Code]....
but btnClose_Click event is not firing. Why? when the user click the close button i want to close the aspz page how?
opened a Popup using Jquery dialog it contains all asp.net controls [ submit,textbox]When i click submit on popup no action is performing.....how can i call that action with jQuery i am beginner..can u explain in detail...if possible with sample code.......
View 1 RepliesI'm doing a timesheet program. In this timesheet program, I have a default button. If a person doing a same task everyday, they can just fill out the task description & click on default button, it will add that task for 5 days.my question is that my button click has to hit database 7 times. Is there anyway that I can improve this?
[Code]....
1. Does the whole page load everytime there is an event(Button_Click)?2. Can an iframe refresh(page load) without having to load the whole page it is in?
View 4 RepliesHave a GridView with a templated select button hidden and using
e.Row.Attributes.Add("onclick",Page.ClientScript.GetPostBackEventReference(this.grdMaster, "Select$" + e.Row.RowIndex.ToString())); to select a row .
When user like to update the datasource he will select one row from gridview then in selected indexchanged event i would display the selected row values beneath the form under the grid , Then user will update the contents displayed from grid and click an update button which is outside the grid . After updating the displayed row , i got to get the values of the next row in the grid and display them for next updation , i'e if users maually selects row 3 from grid then he can update the values using the update button and then on update click itself i'll have to display next row contents of row 4 and this process could go on .
I have a ASPX Page that contains several user controls, which are loaded dynamically after user interaction.
On one of ascx I have a hidden button that is being clicked on some user actions (via button.click()), which works fine on 1st page load. But after the form is being submitted once, the other ascx is loaded. There if user clicks the back button and resubmits the 1st form (again via button.click()), button_clicked event on server does not fire again.
need some info regarding button click. I want to send mail with autorespond mail on single button click. Within that waiting time I want a screen that will show "REDIRECTING" (like gmail) and will show a "thank you" page after successfully sending themail.
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
[code]....
I read so many post which say if i need to catch the button event on the modal popup extender, i need to use javascript. But when it comes to my requirement I get confused.
I open a data entry form which contains several textboxes, drop down lists, validator controls and 3 buttons (viz. SAVE, SAVE & CONTINUE and CANCEL) on the modal popup. The requirement is that :
1. When the SAVE button is clicked the data in the different controls must be inserted into the database and the modal Popup must disappear.
2. When SAVE & CONTINUE button is clicked the data in the controls must be inserted into the database and the modal popup must be ready for the other with clear controls.
3. When CANCEL button is clicked the modal popup must simply be disappear.
I would like to know how a browser based POST request is converted to server side event like button_click.
View 3 RepliesI have something like this:
[Code]....
[Code]....
This does NOT work. What's wrong here?How do I accomplish my goal? I MUST use the Button1_Click event for this one.
I am developing a website using ASP.NET 2.0 with C#.
Now i need to disable the Variuos key combinations such as CTRL_ALTR_DEL, .......after pressing any key on the web page irrespective to the page controls. I need this code snippets in the C# of a ASP.NET Webpage....