Web Forms :: The File '/Site.master' Does Not Exist?

Jun 23, 2010

I just deploy a test site [URL] , but i got The file '/Site.master' does not exist??. Both Default.aspx and Site.master are in the directory.

View 4 Replies


Similar Messages:

Error: "The File '/MasterPages/MainMaster.master' Does Not Exist." (Yes, This File Does Exist!)?

Sep 29, 2010

I just got a new desktop computer with Windows 7 Pro as the operating system. I installed Visual Studio 2008 on to this new computer and tried to open a previously existing ASP.NET 3.5 solution that displayed perfectly fine on my previous computer (this previous computer used the Windows XP operating system, IIS6, and IE7 browser). However, in Windows7/IE8, I'm receiving the following error:

Server Error in '/' Application.
Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.

Parser Error Message: The file '/MasterPages/MainMaster.master' does not exist.

Source Error: Line 1: <%@ Page Language="C#"
AutoEventWireup="true"
CodeFile="default.aspx.cs"[code]....

when I tell you that the file '/MasterPages/MainMaster.master' file does, in fact, exist. In addition, this file's location is properly referenced in the code (as indicated in Line 1 above), and as I said, was displayed properly by the browser in my previous computer. It might also be helpful to note that I've tried to navigate to other pages in this site, and this browser displays the same message for any and all master pages located in my MasterPages folder. In summary, for some reason the browser cannot see any pages in the MasterPages folder. Can anybody tell me why I'm getting this error message when the folder and file is exactly where default.aspx says it is?

View 2 Replies

Web Forms :: Master Page (site.Master) File That Now Contains Nothing But Hex Code, Mainly 0's And 1'...

Feb 3, 2011

My computer system froze on me, the mouse froze, cntrl-alt-del, did nothing, so I reset it. Did a disk check, and now everything seems fine except for my master Page html code which I was in the middle of editing when it happened. The VB code-behind file is still ok, the designer file still shows ok with all of the controls in it, but I can't get into desgn or source view. It just opens and gives a whole page of hesixecimal code such as as:

00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

It just gives me a whole page full of numbers like this. I haven't backed up for a few weeks and so I hope I can get this back.

View 3 Replies

The File /c-store/MasterPage.master.vb Does Not Exist In A System

Nov 4, 2010

This is the exact error I'm getting:Server Error in '/' Application. Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the

Source Error:
Line 1: <%@ Master Language="VB" CodeFile="MasterPage.master.vb" Inherits="MasterPage" %>
Line 2:
Line 3: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

View 3 Replies

Web Forms :: Master Pages For Exist Application

Apr 24, 2010

I finished my asp web application with SQL Server DB, and now it is the time for template "design". I read about mater pages, but it seems not for exist web application, it seems use it before start coding which is the first step in the project. I did mistake which I missed this step because I am new in ASP.NET world. Which solution useful as template for my current web application? my application contain around 11 ASP pages and might be increase. I am thinking to do it page by page, but still I try find-out good solution. Is their any way to use sample template with my exist web application?

View 4 Replies

C# - Pass A Variable From Site.Master.cs To Site.Master

Mar 29, 2011

I'm new to C# web development. I'm trying to reference a param from Site.Master.cs in Site.Master, so that in Site.Master page, I can do:

<%
if (someParam == true) {
%>

some HTML code

<%
}
%>

The param someParam is the one I want to pass from Site.Master.cs.

View 3 Replies

Visual Studio :: Web Site / Web Application Templates Seem Changed - Default.aspx Only With Site.master

Oct 21, 2010

Using Visual Web Developer 2010 Express. I was used to creating a web app anytime and I would get a default page for starters and be happy. But today I find that when I pick either the ASP.NET Web Site or ASP.NET Web Application templates I get site.master and a bunch of site admin files that I don't want. Alternately when I select the empty versions of those templates, I get almost nothing at all. An almost empty web.config page and no Default.aspx page. There is nothing magical about having a default.aspx page in place, but it is an indicator of a change when I can only get a virtually completely empty website or a website with a bunch of bells and whistles I don't want.

Also, for some reason, when I create a new app or website as just noted, in the Solution Explorer I get aspx.designer.cs files showing as well as web.config files for both debug and release. Somehow some settings and templates must have changed, or am I missing something here? How can I get my settings/templates to go back to the way they were?

View 1 Replies

MVC :: Create A Dynamic Field In The Master Page (site.Master)

Oct 10, 2010

I'm starting with ASP.NET MVC (1.0). I have a problem to resolve. I have developed a web applicaton (an application of articles like e-commerce) with a head (logo and menu). I have defined the head (logo and menu) in the Master page (site.master). Now, I must display the number of articles in the head in a field (like the number of articles in the virtual basket in the e-commerce). I can read the number of articles in the data base (in the controller), but i can't integrate it in the master page.

View 1 Replies

Configuration :: Web Deployment Task Failed - Site 'localhost' Does Not Exist?

Jun 23, 2010

I have a web service that I have successfully published locally several times through VS2008. When I attempt to publish this service through VS2010, a dialog window is displayed where you must enter a 'Service URL' and 'Site/Application.' The service URL is not a problem, but what do I enter as a 'Site/Application?'

My entries are as follows:

Service URL: http://localhost/gfIDSProxyAccess/Service1.asmx
Site/Application: localhost/gfIDSProxyAccess

I also tried localhost, gfIDSProxyAccess, www.gfcpa.com, gfcpa.com, www.gfcpa.com/index.html and localhost/gfIDSProxyAccess/Service1.asmx, with and with and without the http://.

View 1 Replies

Web Forms :: Converted Web Site To Solution. Now Getting "The Name {0} Does Not Exist In The Current Context"?

Mar 13, 2010

The website compiled fine before as a regular website in VS 2008. However, in my attempt to convert it into a solution and separate out the business logic into its own project, I'm getting issues where it says that my codebehind references to controls cannot be found in the context. This is for every aspx or ascx file. All my references are there. Is there a correct way to convert a website into a solution? I simply drag-and-dropped the web files into a project in the solution essentially.

View 1 Replies

Web Forms :: The File '/<X>/<Y>/<Z>.aspx' Does Not Exist

Jan 1, 2011

I have found the error below in my web log and I wonder what the cause may be.

The page indeed does not exist at the requested location.

Perhaps a request is incoming and ASP.NET is trying to compile that page?

But, I did not know a request to a non existing page would cause a compilation error.

Error: The file '/<X>/<Y>/<Z>.aspx' does not exist.

Stack:

at System.Web.UI.Util.CheckVirtualFileExists(VirtualPath virtualPath)
at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)........

View 2 Replies

Web Forms :: 404 Error Even Though File Exist?

Feb 18, 2011

THere is one page on my site that I am unable to page. When I attempt to page it I get the following error below:

404 - File or directory not found.

The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.

I checked everything, yet I am unable to page the page. I am working on windows server 2008/ iis 7.

View 8 Replies

Web Forms :: The Master Page File '....submaster.master' Is Not Valid.

Feb 2, 2010

I am working on masterPage/sub masterpages, all worked fine until this morning.When I open a .aspx which uses masterpages, in the design view it shows the error message..

I've checked both master pages several times, all tags are matched and visual stuido itself doesn't indicate any errors. Also in debug mode the html page is generated without any problems..

View 10 Replies

Web Forms :: Cannot Bulk Load - CSV File Does Not Exist

May 8, 2013

I have CSV file i want to upload the CSV file data to my table, With file fileupload, below is my code

public void InsertAccounts()
{
con.Open();
SqlCommand cmd = new SqlCommand("BULK INSERT SN001CompanyTable FROM '" + System.IO.Path.GetFullPath(FileUpload1.PostedFile.FileName) + "' WITH (FIRSTROW = 2,FIELDTERMINATOR = ',',ROWTERMINATOR = '
')", con);
cmd.ExecuteNonQuery();
con.Close();
lblalert.Text = "Submitted";
}

After selecting file when i click on upload i am getting

Cannot bulk load. The file "C:Program Files (x86)Microsoft Visual Studio 9.0Common7IDECompanyData_Format (1).csv" does not exist.

My CSV is on desktop, i dont know how fileupload take correct path -

View 1 Replies

MVC :: How To Handle Forms In Site.Master

Dec 3, 2010

I have a partial view thats being rendered in my Site.Master file, and it contains a form - im able to submit values and itll throw it to the controller just fine..the problem is when validation fails and i need to go back to the form to display errors

How can i have a form that uses a viewmodel inside Site.Master and still be able to throw it back and post validation errors?

[Code]....

View 3 Replies

Web Forms :: Navigation In Site.Master?

Oct 29, 2010

I have a site with a few pages, and I decided to have my navigation button (to go from page to page) on my site.master page so every page looks the same. Two questions:

1. is that the correct thing to do? seems to work fine, I'm just not sure if it is proper or not.

2. with the navigation/buttons being on the site.master. How can I pass an "id" from one page to another.

Example:

<asp:Button ID="Button5" runat="server" CssClass="style2" ForeColor="#000084"
PostBackUrl="~/Inbounds.aspx" Text="Inbounds" />

I want the postbackurl to be "~/Inbounds.aspx?id=" a value from a textbox on the page you are leaving. More or less to pass a company name or ID number from page to page, so the queries know who the "owner" is?

View 15 Replies

Web Forms :: The File Web.sitemap Required By XmlSiteMapProvider Does Not Exist?

Aug 19, 2010

I've been searching Google for some answers and failed! Nothing has worked yet. Yes the Web.Sitemap is on the server.

Here is my web.config.

[Code]....

Here is my web.sitemap

[Code]....

I'm not sure if being hosted on a shared web server from aspnix or even having it in a sub domain may be the issue. This is my first time using the sitemap control.

View 5 Replies

Web Forms :: Parser Error - Linked File Does Not Exist

Oct 27, 2010

I'm getting the typical "Parser Error - the file '/virtualdir/Shared/Controls/filename.ascx.cs' does not exist..." error message on an @Register directive statement in one of my .master page files that references the same file. Note, this is working just fine on my old PC, where I have the same solution running on a Windows XP SP3, IIS 5.1 machine, developed with VS 2008 Team System. I'm now trying to set up my development environment on a new PC, running Windows 7, IIS 7, VS 2008 Team System.

The thing is this, and probably where I think I need help, the specific file it's saying has an error is a file that I added in one project (which was developed using VB.NET) as a linked file from another project (which was developed using C#) in the old PC. The solution in the new PC builds fine and runs fine (home page comes up, login works, brings up next page) until it tries to access a page that uses a master file that references the user control added as a linked file on my old PC. Note, the project and file that the linked file references has been added and exists on the new PC in the very same directory structure as the old PC.

View 2 Replies

Web Forms :: Error. The File Web.sitemap Required By XmlSiteMapProvider Does Not Exist?

Aug 6, 2010

I have been developing a menu using menu control and sitemap but i got the following error.

The file web.sitemap required by XmlSiteMapProvider does not exist.

View 1 Replies

Web Forms :: Dynamic Site Map In Master Page

Jan 30, 2010

I have a simple SiteMapPath in my master page like below.
<asp:SiteMapPath ID="SiteMapPath1" runat="server" SkinID="SiteMap" Visible="true" /><br />
Also I use Web.sitemap and include all static sitemap pages. In my Web.config, I have this:
<siteMap enabled="true"/>
Currently, many pages uses this static site map for many projects and I'm not supposed to update the master page, but I need to have dynamic site map so that I can add query strings for each navigating pages.

View 2 Replies

Web Forms :: Set A Master Page Dynamically From Other Site?

Feb 4, 2011

I need to set master page dynamically from other site. I am trying this

protected
override
void OnPreInit(EventArgs e){
this.MasterPageFile =
http://localhost/site1/MasterPage/MasterPage1.master;
}

But it gives error

'http://localhost/site1/MasterPage/MasterPage1.master' is not a valid virtual path.

View 3 Replies

Web Forms :: Master Pages And Site Navigation Tutorial?

Jun 28, 2010

I am following this tutorial [URL]and would like to know if somebody can provide the CSS used in the example.

View 2 Replies

Web Forms :: Using Cross - Posting And Master Pages In 3.5 Site?

Jul 30, 2010

I have an interesting issue I have racked my brain trying to find a solution to.

I have a site with a single master page. Part of that master page is a text field and button. They are not part of a content placeholder, they are simply part of the master page, itself, and are intended to allow people to search the site from any page on the site.

So, all search requests are routed to a search.aspx page, regardless. I am doing this by setting the PostBackUrl attribute of the button control to "search.aspx".

This all works great, except when I try to use this search capability from the search.aspx page, itself. I figure this is because I am using the Page.PreviousPage object and since a postback from the search.aspx page, itself will result in the Page.PreviousPage being Nothing, it is not performing the proper action.

View 1 Replies

Forms Data Controls :: If File Doesn't Exist , Then On This Exception How To Redirect To New Web Page

Feb 1, 2011

I am using VS 2005.My requirement is

1) on a button click, new web page(New.aspx) should open and this new web page is populating data from an xml file and if this xml file doesnot find then it should redirect to another webpage ErrorPage.aspx.

[Code]....

View 2 Replies

Web Forms :: Using Site.master To Call Js Function When The Page Loads

May 27, 2010

I have a VS 2010 and have created some aspx content pages associated with a master page. I want to call a javascript function right when the page loads but am not able to find an onload client side event for these pages which are using asp:content as there only controls. I know that I can put content in them and I have but how do I call the client side onload event from the main content control?

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved