Web Forms :: Unable To Add UserControl Dynamically On Postback?
Mar 29, 2010
I am trying to add UserControl dynamically to the page. UserControl is added only once (when the page loads) but on postback it doesn't add again (Only one control is alwasys there).I want to add user control Whenever user clicks "btnAddUCWingControl" so when the page loads for first time, there will be only one control, on postback there must be TWO controls and so on
Here is my .aspx (this is content page)
[Code]....
My .aspx.cs file is
[Code]....
View 2 Replies
Similar Messages:
Nov 15, 2010
I have several usercontrols which are loaded based on business logic.However, all of them have webcontrols whose selected/entered value needs to be accessible in parent page on an event.Since there can be any combination of UserControls, I do not want to load all the UserControls in the Parent Page, since they are heavy.
I would like to load only those controls which are supposed to appear on the page, yet access the value from the usercontrol which caused the postback. (I would rather not access using Request.Form) (ViewState is open, but unsuccessful to store value in parent page's viewstate in onClick)Here is a sample scenario
Page: Home
Dynamically Loads: UserControls1
UserControls has TextBox tb and Button btn, causing onClick
When btn is clicked, I want to get value of tb in parent page on PostBack, Page creates UserControl2
View 3 Replies
Aug 20, 2010
i have a very strange issue with a user control we are dynamically loading on an asp.net web page(.net 2.0). the user control has 3 dropdowns, one of which has a selectedindexchanged event attached to it (which loads the third dropdown with a set of values).
the weird thing is, if there are currently any invalid fields (where field validators have been activated) in other parts of the form, when you go to select the drop down in question on the FIRST change it does nothing, but then when you change the index again it works perfectly! i dont understand how the event wont fire for the first change, but for every change thereafter.
However, if all these fields are filled in correctly above the usercontrol, it fires off the selectedindexchanged event correctly.
in regards to validation i have disabled ALL POSSIBLE validation in order to try and eliminate it as a culprit, so i dont understand how validation can be affecting the usercontrol.
View 1 Replies
Apr 6, 2010
im creating site with usercontrols. I have repeater, inside it is another repeater with usercontrol. My problem is passing BindedValue to usercontrol.Bindings works fine and binds the value i need but it cannot pass the value to usercontrol. When i type it manually it works, when i bind it, it passes null (!).I've tried get,set, functions (ondatabound, onload, oninit), accessing control from code with no luck. Ive read and tried to do all the google solutions but with no luck. (even with creating usercontrol inheritance)
View 5 Replies
Jan 28, 2011
I have a page with an UpdatePanel with a UserControl in it. That UserControl contains a GridView with a nested UserControl that seems to disappear when the parent UserControl is rebound. I cannot for the life of me figure out why the child UserControl disappears. The code works beautifully on the first load, but any partial postback causes the "Pick" UserControl to disappear.
[Code]....
View 5 Replies
Mar 17, 2011
I've a ASP.Net page (Default.aspx) which will load UserControl (ucontrol.ascx) dynamically into an UpdatePanel. By using UpdatePanel, we believe we're able to prevent the entire page to be posted-back.
My problem is, within the UserControl, we have some form controls, such as inputs and buttons; after the UserControl is loaded, clicking on any button inside the UserControl will cause the UpdatePanel to be blanked. During the investigation, I found that, breakpoints within the Button1_Click() in the code-behind for the UserControl is never reached. Please reference to the code below, this references to [REFERENCE]1.
[code]....
View 2 Replies
Mar 3, 2011
In the UserControl I am adding dynamic ImageButtons depending on the condition When the page loads and I click on Edit button I have no problems and btnEdit_Click is fired. But after that (btnEdit id removed and btnSave is added) when I click on btnSave the btnSave_Click event does not fire. What could be the problem?
[Code]....
View 1 Replies
Dec 17, 2010
I have a webpage with two usercontrols. Usercontrol1 displays the time and the Session["Username"].
The default Session["Username"] is 'guest', which will change as soon as you are signed in. Usercontrol2 is the sign in form. The webpage doesn't cache so everytime you should get a "fresh" page?
The follow happens when a user signs in: In usercontrol1 the Labeltime gets updated but labelWelcomeUsername doesn't.
[Code]....
View 3 Replies
Nov 15, 2010
I would like to load UserControl dynamically from DLL in the bin directory.
The dll contains several usercontrols which dynamically create webcontrols within them.
I do not have Virtual Path of the UserControls to use in LoadControl(String virtualpath) and LoadControl(Type, object[]) does not work(why the heck is it there in the first place anyways).
provide me some sample code which takes either the path of dll or assembly name "ServerControls" to load usercontrol "UserControl1" dynamically into placeholder "PlaceHolder1"
View 1 Replies
Jan 19, 2010
Im trying to add a new "Question UserControl" dynamically to my page each time the user presses "Add question". This works fine and the last control gets deleted when the "Delete question" is pressed. My problem is that in each of the "Question UserControls" i have a placeholder where i would like to add a new Textbox when the user presses "Add answer" and then delete it once the "Delete answer is pressed". The way it works now when i press add answer, an Answer Textbox gets added to the placeholders in all the added Usercontrols. But i only want to add it to the one UserControl where the user pressed "Add answer".
View 4 Replies
May 3, 2010
i want load a usercontrol dynamically and pass a string to it ho do i do it..
View 3 Replies
Jan 19, 2011
I have UserControl that has asp control(<asp:Button runat="server" ID="btn" />) and I want to render it.
I tried 1
[Code]....
It doesn't works because it says that each control that has runat="server" must be in Form.I also tried 2:Because loader.Form is null, I create HtmlForm and added the ctrl to it and then added HtmlForm to loader's Control, BUT it says that it has 2 HtmlForm. So, instead I "injected" HtmlForm to loader like this
[Code]....
Now no error is occurred, BUT StringWriter is empty. don't tell me to add Page to solution and override OnRender. I want to do it as I mentioned above.
View 6 Replies
Oct 9, 2010
I was wondering if it is possible to upload the .ascx and .ascx.vb of a custom usercontrol into my project directory at runtime via an upload control and then after that use through a database query point my page to load that newly uploaded control via (LoadControl(<newlyUploadedControl>)?
View 7 Replies
Nov 16, 2010
When it comes to the usercontrol specially when they are loaded dynamically on the basis of certain conditions then it becomes a very confusing work. I have read in many forums that the dynamic controls have to be loaded in OnpreInit or OnInit. Some of those links are[URL] But this is useful only when if the we know that we have to load UserControl1, UserControl2 without considering any conditions. But what if I have a Tab control and for each Tab Click I have to load the UserControl dynamically. In that situation how can we add the control in either OnPreInit or OnInit. If I am not mistaken then in such case, then we can add usercontrol in certain events. If we are using a TabControl then we load in Tab_Click , if we are using Menu Control then we use Menu_Click and depending
upon the particular tab or Menu we load associated usercontrols. Hence in these conditions, how can we go with the logic mentioned by above links. I have this confusion for very long time . I am posting little portion of my project here. I am using RadTabControl but it doesnt matter if it is Microsoft TabControl. In the aspx, I have a code to define RadTabControl.
<telerik:RadTabStrip
ID="tabMemberDetails"
runat="server"
Skin="WebBlue"
MultiPageID="tabDetails" SelectedIndex="0"
Align="Justify"
ClickSelectedTab="true"
EnableViewState="false"
ReorderTabsOnSelect="true"
Width="1139px"
OnTabClick="tabMemberDetails_Click" ScrollChildren="true">
</telerik:RadTabStrip>
In the code behind, I am loading usercontrol on the basis of the particular TabClick. tabMeberDetails_Click fires whenever I click on the tabs.ViewState["ControlName"] stores UserControlName on the basis of certain condition and finally i load the usercontrol.
proteced void tabMemberDetails_Click(object sender,
RadTabStripEventArgs e)
{
Conditions......
{
ViewState["ControlName"]=........
}
viewDef=ViewState["ControlName"]
UserControl control = (UserControl)LoadControl("~/Controls/"
+ viewDef + ".ascx");
after this I add control to the RadTabStrip.................. and call bind method.........
}
As you can see from above, I am loading my usercontrol in tabMemberDetails_Click event. I see no other choice to do it in OnPreInit. Can anyone answer if this is the right way to do or there is another way that complies with the logic in the links given above.
View 3 Replies
Aug 7, 2010
I have this user control :
[Code]....
and i load it dynamicly in Default.aspx like this :
[Code]....
How can I pass the title value ?
View 4 Replies
Jun 21, 2010
I am trying to dynamically load query form as a user control and build a sql statement based on user selection. I have a dropdownbox for Tablename, FieldName, ConditionalOperators and Value Field. Once the user makes a choice and causes a postback I loose my QueryForm (UserControl) and the selection Changed event never gets fired. I tried reloading the QueryForm on Page Init, still no luck.
View 5 Replies
Nov 2, 2010
I have ASPX page named ArtifactReporting.aspx where I have 3 linkbuttons. For each button I have 3 different UserControls to be loaded dynamically. So I have written for each click
UserControl uc = (UserControl)this.LoadControl("<ASCX page name>");
divArtifact.Controls.Add(uc);
Now in one of the ASCX page I have a server side button. When I click on the button, the content of the ascx is going off, which is correct, because the page post back is happening and in Page_Load I have not written anything that will load the ASCX page.
how to go about this? I need if I load an usercontrol dynamically, I should be let the users carryout operation that usercontrol.
View 6 Replies
Jun 20, 2010
How to load UserControl at runtime and invoke the methods present in that usercontrol dynamically( at runtime)?
View 4 Replies
May 5, 2010
1. When executed I have a "Add Building" and "Click here to add tower" on the page.
2. When clicked on "Add Building" a editable gridview appears when I enter the text and say update.
3. When I click on "Click here to add tower" another button "Add Tower" is displayed on the
page.
4. On this "Click here to add tower" event I have called the usercontrol, where the usercontrol has a editable gridview and a button called "Add Tower".
5. When I click on "Add Tower" a editable gridview should be displayed but the editable gridview is not displayed ,it disappears.
6. Postback is happening ,so I am not getting where and how to handle the postback and even the viewstate
[code]....
View 2 Replies
Oct 3, 2012
I want to use same functionality in Ajax:Accordion. Looking for the code for this as well as instead of label in user control i want to bind the grid view.
View 1 Replies
Oct 9, 2010
In a page , when I click a button 'showDialog' I am loading the user control dynamically in a dialog. I am linking to the event in the user control as explained below. The parent page is not receiving this event.
Button_Click(){
UseControl1 gc = dlg.LoadContent(:UserControl1.csx);
gc.CausePostback += new EventHandler(execute_CausePostback());}
execute_CausePostback(){
In UserControl class after clicking the submit button
Submit_Click(){
saveRecord();
raise event CausePostBack();
View 4 Replies
Dec 24, 2010
I have a dynamically loaded usercontrol
<%@ Control Language="C#" AutoEventWireup="true" CodeBehind="ucEditPanel.ascx.cs"
View 1 Replies
Apr 23, 2010
I have a tab which loads a usercontrol dynamically and this usercontrol has 2 other usercontrols. One on the left loading treeviewA and one on the right treeviewB.I am using update panel for aspx and the ascx too. But, I am not able to control to page state and moreover when I click on one control, it get its child item, by the time I click on other control, it would refresh other control too and will lose its value.I am using below code in aspx and I have embeded update panels in usercontrols too
using http://msmvps.com/blogs/luisabreu/archive/2006/11/16/adding-removing-updatepanels-dynamicaly-from-a-page.aspx
as reference
<asp:ScriptManager
ID="ScriptManager1"
runat="server"/>
[Code]....
View 3 Replies
Mar 17, 2010
i built a user control for login process, i'm using it in some of my pages, but something
wierd happens, in some pages it works fine, and in some page he just doing Postback,
and put this in the url:
?ctl00%24ContentPlaceHolder1%24LoginBox1%24TxtUserName=&ctl00%24ContentPlaceHolder1%24LoginBox1%24uiTxtPassword=&ctl00%24ContentPlaceHolder1%24LoginBox1%24SignInCmd=Sign+In
View 3 Replies
Mar 24, 2011
I'm having few UpdatePanels on my master page. And then, I have RadTreeViewcontrol on the page, that should cause partial postback each time node is clicked. Everything works fine there. Since I'm using the same tree on some other pages, I moved this functionality to UserControl. Stuff I've done before, so no problem. Moved some code to ascx, created some events. Everything always worked for me well. But not now. RadTreeView is nested inside UserControl, and this control on master page with update panels, see below:
<asp:Panel ID="pnlContentWrapper" runat="server" CssClass="ContentWrapper">
<div id="HeaderBreadCrumb">
<asp:ContentPlaceHolder ID="HeaderBreadCrumbContent" runat="server" />
</div>
<div id="HeaderMenu">
<asp:UpdatePanel ID="upnlTreeMenu" runat="server">
<ContentTemplate>
<asp:ContentPlaceHolder ID="HeaderMenuContent" runat="server" />
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="treeProductTree" />
</Triggers>
</asp:UpdatePanel>
</div>
<div id="TreeDiv">
<fp:ProductTree ID="treeProductTree" runat="server" />
</div>
<asp:Panel ID="ContentDiv" ClientIDMode="Static" runat="server">
<asp:UpdatePanel ID="upnlTreeContent" runat="server">
<ContentTemplate>
<asp:ContentPlaceHolder ID="TreePageContent" runat="server" />
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="treeProductTree" />
</Triggers>
</asp:UpdatePanel>
</asp:Panel>
</asp:Panel>
And the user control is really simple:
<%@ Control Language="vb" AutoEventWireup="false" CodeBehind="ProductTree.ascx.vb"
Inherits="ProductTree" %>
<div>
<telerik:RadTreeView ID="treeProductTree" ClientIDMode="Static" runat="server" EnableDragAndDrop="false"
SkinID="CustomSkin" CssClass="MasterProductTree" DataFieldID="NodeId" DataFieldParentID="NodeParentId"
DataTextField="NodeName" DataValueField="NodeId" />
</div>
And some code behind:
Imports Telerik.Web.UI
Public Class ProductTree
Inherits System.Web.UI.UserControl
Public Event NodeExpand As EventHandler(Of ProductTreeNodeExpandEventArgs)
Public Event SelectedNodeChange As EventHandler
Protected Sub ProductTree_NodeExpand(ByVal sender As Object, ByVal e As RadTreeNodeEventArgs) _
Handles treeProductTree.NodeExpand
Dim nodeId As Integer = CInt(e.Node.Value)
Dim evetArgs = New ProductTreeNodeExpandEventArgs(nodeId)
RaiseEvent NodeExpand(Me, evetArgs)
//'some logic
End Sub
Protected Sub ProductTree_OnNodeClick(ByVal sender As Object, ByVal e As RadTreeNodeEventArgs) _
Handles treeProductTree.NodeClick
RaiseEvent SelectedNodeChange(Me, New System.EventArgs())
End Sub
End Class
What I don't know is: why is this causing full postback instead of partial? I suspect that it may have something to do with raising my for SelectedNodeChange, but I don't know how to deal with it other way. I need to let other components know, that node selection changed. How can I improve this to make it work with UpdatePanels?
View 1 Replies
