i would like to know how to use in the header of a webform an application parameters.Indeed, I have a virtual repertory in my application, and my webform make a reference to this repertory :
[Code]....
I would like to replace the path by an application parameter.hank to this, I will be able to just change one parameter rather than change each header of my webpages.
I'm creating a pseudo invoicing system. I've got a webform where users can pick such informaiton as days, companies, etc to pull the information to create the invoice for and then they click a submit button. I'm wondering what the easiest method would be to get this information. I've had success with such commands as:
DropDownList SourceTextBox = (DropDownList)Page.PreviousPage.FindControl("DropDownList2");
but how can you pull this information through the SQLDataSource tools? When I choose to alter the "WHERE" in the sql clause to a control items in the previous page are not accessible.
when asp.net output a page ,I want to add some same parameters for all links() in this page
How I can do it ?
somesite.com/page.aspx => somesite.com/page.aspx?same=value
somesite.com/?anyp=hevalue => somesite.com/?anyp=hevalue&same=value
auto add same=value
I will be creating a webform that will require online application and sending/uploading of resume that will later be forwarded to an e-mail address (the resume will be an email attachment). I badly need some tips on this! Really new at these things. I will be using VB to code the web form.
View 2 RepliesThus far working with asp.net webforms was very easy .... But never implemented URL Routing in webforms... I know asp.net MVC Handles URL Routing pretty well... How to get started with URL Routing in an asp.net webform application? For EX: [URL] i want it to be like [URL] Any good article to start with URL Routing asp.net 3.5
View 1 RepliesWe have lot of application parameters for each module in a C# .NET 4 ASP website. parameter examples: timeouts, formulae constants, thread limits per module, $ charges per usage etc. What is best out of following approaches we know: Use DB config table Use an xml. load that xml into local cache on start (and on xml change) simple constants.cs file with public const int XYZ = 123; type of key-value pairs. web.config (though i think its mostly for deployment type of config)
View 7 Repliesi want to use profile provider in webformapplication
i hear that profile provider can only be used by website
is there some way to use it also in webform application?
i try to useProfileCommon method but i got an error
i am building a web application and i want to access a textbox which is on the index page from the login page. basically what i did is this. i programmatically created my registration form for new users and also login for registered users, now i want to display on the index page the name of the logged on user on the index as the page loads.
View 3 RepliesEnvironment used - Asp.net mvc 1.0 with c#
Problem -I have used simple mvc application. and also added webform into mvc application.and it is working fine. but when i used session object for sharing data between mvc and webapplication. it is not working. I have put Session["logon"] = "logon"; object into mvc controller and when i access this into webform then there is no value in session object.
I need to execute the following exe file with multiple arguments from asp.net web application
"C:Program FilesSysteminvoke.exe" /project "UPLOAD" /app "Default App" /task "XMLGEN" /parm.OutputDirectory "c: emp"
I tried the following asp.net code,
[code]....
I am passing value from one page to another page using query string so tell me easy way to implement the encrypted query string .
View 1 RepliesI am using a server control on a single web.forms page. I have to use this control on a web.forms page since its a server control, although this is actually a MVC project. So I created a web.forms folder and put my new page in it. I then copy the example code from the signature control. I get the following error:
The base class includes the field 'ctrlSign', but its type (WebSignatureCapture.SignatureControl) is not compatible with the type of control (ASP.signaturecapture_signaturecontrol_ctlsignature_ascx).
I know the code works because if I removed the ID attribute from the server control, it no longer gives me this error and my control renders. But I need the attribute for the ID so I can perform is post event
I am using this signature control. Here's the web.forms code...
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Index.aspx.cs" Inherits="KahunaCentralTIDRevamp.SignatureCapture.Index" %> [code]....
I need to use routing with parameters in my ASP.NET application.
public class Global : System.Web.HttpApplication
{
void Application_Start(object sender, EventArgs e)
Then, by navigating to "/Profile" I want to get on Page_Load method Request.Params["Id"] as null and by navigating to "/Profile/1", Request.Params["Id"] as "1".
how to display a header of gridvew as a 3D view color Header?
View 14 RepliesScenario:
I have a Gridview where I want to handle the Sorting in a custom control that I've added to the header.
I've added this control to my GridView's Header via OnRowCreate event handling. I want the Sort Expressions to persist session to session (via Webparts Personalization)
Here is what I have for adding the custom header control to the GridView Header
[Code]....
This works out well for adding the control, but I can't get anything to persist because these controls are creating initially via postback (per the event) and re-created on all subsequent postbacks. I can't add an If(!IsPostback) because the controls are initially created on the gridview's postback (well at least thats how it's acting when I put it in there) If I were to add this control via the ASP page, not via the Codebehind, I would be able to persist the control. If I try to treat it as though everything is setup correctly, and assign my custom control's controls to [Personalizable], I get a runtime error telling me that I can only have webpartzones in or before Page_init (I'm guessing this is due to when/where the
gridview hits the OnRowCreate event). If there is some fundimental logic I'm missing, or best practices that I'm moving away from,
is there anyway i can add in the gridview in header column name a button instead of label ?
column name 1 column name 2 column name 3 button
i am using checkbox column in item template for the button ,i wish after selecting checkbox for some row to click on the button on the header !!
i have a problem with ListView control,when i bind data to it, it shows the heder of it also.
i don't want to show me the hedear, what should i do?
[Code]....
I am using the following code to change the header based on the session variable
[code]....
I have a Tab Container that I would like to be able to add a star (*) at the end of the tab header text when there are NEW Users to be approved by the Site Administrator. By default meaning that is what I typed in designer mode is "Users Waiting Approval", but when I load the page I run a routine to see if there are and new users requesting access and at that point durning the page load I would like to change the tab from "Users Waiting Approval" to "Users Waiting Approval *" with the star at the end (*). How can I update this tab header text durning the page load event? Is there some javascript function I can call like set_HeaderText?
View 1 RepliesI am working on a railway web application and I have following layers:
[Code]....
I pass Domain Entity Objects from Repository to Service layer and thinking of passing View Models from Service to Presentation layer. Website would require a login and after successful login I have to present a search screen with basic search (as default option) and option for advance search. Once user fills the
search criteria I have to gather data from DB & Web Services and present the results to user. User would select a particular Rail option and would move on to other additional options page BUT they should be allowed to change their previously selected Rail option by going back to Rail search results. I have to
always hold and present user's initial search criteria (basic and advance search options selected by user on the search wizard) on every screen and need these criteria in Service and Repository layers.
What is the best way to hold these search criteria and pass them from page to page within presentation layer and across layers? Should I create a View Model class for Search Options? Or a Domain Entity Object (I don't think so)? and best way to pass it across layers and from page to page with in presentation layer.
in webform 1, i have search button when i click its open webform2 and there the gridview.
I want when i click the link in gridview in webform 2 then it close webform 2 and change the datasource parameter in webform 1 without open the new window (still same window)
What is right way to send visitors from one webform to other. What are their limitations and their plus points.
View 2 RepliesI am always thinking about validation in any kind on the webpage (PHP or ASP, it doesn't matter), but never find a good and accurate answer. For example, a I have some GET-Parameter, which defines a SQL query like DESC oder ASC. (SQL-Injection?) Or I have a comment-function for user, where the data is also saved in a database.
Is it enought to check for HTML-tags inside the data? Should the validation done before adding it to the database or showing it on the page? I am searching for the ToDo's which should be always performed with any data given from "outside".
i am trying to call an SSRS report (in VS 2005) from my asp.net (web application) implemented in VS 2008 (don't ask me why, i am kind of confused by this weird arrangement too). report has been deployed to report server and it contains a multi-value parameter.when i call report from asp.net app, i set the value for this multi-value parameter as a string and all selected values are separated by comma. i.e. i have 5 options (a, b, c, d, e), and i selected first two, the string is then "a,b".
the multi-value parameter on the report side is defined as: Multi-value selected, Allow blank selected, Avaliable values are from query (a dataset that contains a, b, c, d, e) Value field and Label field are both mapped to dataset filed (there is only one field in the dataset). the default values are from query too (same dataset). value field is mapped also.
i have two problems:
1: it looks to me that all available values are selected on the report side, regardless what i really selected and passed over (when i turn on paramters).
2: when i turn off parameters, i need to display what values being selected as a string, the join statement, join(Parameters!TeamLead.Value), gives a list of all available values for the multi-value parameter, however, i only need selected values. how should i write this expression (for a textbox) to join only selected items in the multi-value parameter(i don't see any option in the intellisense dropdown box)?
I'm writing an Asp.Net WebForms app where I am calling an edit page an passing in the data about the record to be edited using query string parameters in the URL.Like:http://myapp.path/QuoteItemEdit.aspx?PK=1234&DeviceType=12&Mode=EditOn a previous page in the app, I have presented the user with a GridView of screened items he can edit based on his account privileges, and I call the edit page with these above parameter list, and the page know what to do. I do NOT do any additional checking on the target page to validate whether the user has access to the passed in PK record value as I planned to rely on the previous page to filter the list down and I would be fine
View 7 Replies