I have a user control that will basically be a header in most of my pages, but not all. I want some code in the user control to be run before the page load event of the page that holds the user control, but the page load event fires before the events in my user control. Is there a way around this?
View 3 Replies
I have a page called "EDIT.ASPX" on that page it has come TextBoxes, Label and 3 User Controls. When the Edit.aspx page is loaded all the correction form Controls are loaded properly, even the User Controls loads with no problem. The problem that I am expericing is that on the User Control I have a CHECKBOX with AutoPostBack="true". Each time the user click the CheckBox the User Control disappear. NOTE: How do I fix this problem and eliminate my page control from vanshing. The user control needs to keep the same state as the Edit.aspx page when the checkbox is clicked. I need to be able to click the checkbox without loosing any data on the page rather it's the Edit Page or the User Control.
View 5 RepliesI have an EDIT.ASPX page and on that page I have some labels and textboxes and a user control. I listed all the related codes you can have a clear picture - not all of the codes are given me a problem. ONLY ONE.
HELP ---> On the Uer control (SiteTemplate2.ascx) I have a DataList that is being populated by the database and that works fine. I have a
CHECKBOX on the user control page each time the user check the CHECKBOX the user control content totally disappears from the EDIT.ASPX page. There is no error message -- I believe this is a post back error but I don't know how to fix it.
Goal: Each time the checkbox called (CHKBSideBar) is clicked on the user control page all of the page content should stay in place that include
EDIT.ASPX Page and the refeneced USER CONTROL. I should be implement a CheckedChanged Function without either of the pages lossing DATA. I need to be able to access post back event from the user control of the Edit.aspx page. When the user click a box on the user control page how do I keep the same Page_Load event on the edit page. I need to reference the Edit page from the user control.
Note: The edit page loads the user control (SiteTemplate2.ascx)SEE CODES BELOW
I know this is a lot and thank you in advanced for your help. I tried to include all the pages that are key players. I must user the user control bacuase the user can select different template so eliminating the user control is not an option.
'*******************************************************************
The user control is being referenced from the web.config file ** Works find! **
[Code]....
EDIT.ASPX Page **-- WORKS FINE!** [Code]....
Here is my requirement -
1. I need to load a user control on link click event of a link button during postback of aspx page.
2. On button click event of a save button on that aspx page, I need to read the selected values from that user control on further postback.
If I write the loadcontrol code in link_click event, the control is not recognized at all in the button_click event. When I shift it to page_init and execute only during not postback, the user control loads with default values.
Using vb.net/asp.net 2005.
I have a page books.aspx that has a control named authors.ascx.
Inside the authors control there is a "select" button I want to add some kind of listener or event handler (not sure of the correct terminology) so on the parent page (books.aspx) I can respond to the "select" button being clicked.
I have to pass the authorID from the user control to the parent page.
In my authors.ascx control I just created this event:
[Code]....
Now I need to write the function for SelectAuthorBtnClick and I think add some kind of listener in the parent page to listen and handle the event.
I have a page with in a master page. This page has a user control with a text box and a button. I also have another button on the page. As the page first loads the button_click event on both the controls does not fire when clicking the buttons. I also have an event on the enter key on the text box. This event fires which causes a post back. After post back now my button_click event fire. The button_click event does not fire on the first page_load.
View 2 Repliesi have:
- Default.aspx;
- user1.ascx: 1st user control containing repeater;
- user2.ascx: 2nd user control containing a detail view of row.
In page.aspx i dinamically load the repeater inside a user1.ascx.
after i want to dinamically load the 2nd user control also in default.aspx by a button inside a user1.ascx.
How i can do this? I can't load user2.ascx inside user1.ascx but only in aspx page.
I have a function on page load which will work based on dropdown selected value. and I am using this dropdown in a user control. So getting problem because the dropdown value is not loaded yet before Page Load. How Can I do that using those control still.
Here is my code below.
public partial class GradeEntry : System.Web.UI.Page
{
StudentManager studentManager = null;
CourseManager courseManagerObj = null;
GradeManager gradeManager = null;
[Code]....
I have a stylesheet attached to a master page and a web user control attached within that master page.
here is the css code
#searchBox
{
background-image: url (image.jpg);
}
in the master page, i create a div inside the made called "searchBox". Then, I have a web user control inside that div. However, my background image does NOT load. How can I resolve this?
I have a need to improve the asthetics of the standard buttons .net churns out. I am fully aware of how to do this using css but I can only really style the button if I add a span element inside the button. Luckily the link button allows this so I have got the following which for usability i have put inside a user control.
<linkbutton><label>button text</label></linkbutton>
I have exposed elements so that I can set values from within my aspx.cs page, these are text, command name, command argument, ccc class etc.
As it is a generic control, I have added OnCommand='Button_Click" which fires the event in the control itself. The Button_Click event calls a method ButtonControls passing associated command name and arguments across. ButtonControls uses the name to call the appropriate function.
As these are all very generic buttons, so far so good, but I have a need to trigger button events that may not be generic i.e on a control I have buttons that do something very specific to that control. I also have a requirement to call functions which relate to specific controls on the aspx page. I have created a user control which encapsulates the link button control.
Click triggers > Button_Click > ButtonControls > MethodToCall
sometimes I don't want to call Button_Click just an event on the aspx page itself rather than my generic button handler.
I have a 2 part question for web user controls: 1. I want to have an event fire in my user control, but have it be consumed by the parent page, like:
<asp1:Object id="objectMain" runat="server" OnClick="Click" />
Is it possible to do this? Or do I need to make a server control for this functionality? I have it being able to be set in the Page_Init, but I'd like to make it as similar to actual controls as possible. Also, if it is possible to access via the Events section under Properties, that would be good and 2. I am trying to register the web user control as an AsyncPostbackTrigger for another UpdatePanel. With the previous question in mind, is it also possible to set this via the GUI, or does this need to be set programmatically as well?
On my master page , I have "Search textbox" and "Search Button".
On My content page , I have a "User Control" which has a "GridView".It shows some data about Vendors.
Also, on this User Control's Page Load, i have code written to display all vendors in GridView.
Now, when user enters Vendor Number in "Search textbox" , and hits "Search Button" , i want to handle this event inside my User Control.
How to do this ?
My web application has user control which uses third party controls called Devexpress controls. The user control is a menu and is part of the Master page. It is placed there because this needs to be available in all the pages. My user controls raises a even on item clicked. Now, My question is that Is there any way to know that the event has occurred in page_load of the current page in which I am in?
View 3 RepliesI understand I need to load my dynmaic control on every postback and preferrably in Page_Init(). But my dyanmic controls are loaded from a dropdownlist selectedindexchanged event handler. Now after any postback, my dynamic controls are gone. How would I force it to load on every postback ?
View 2 RepliesBelow dynamically control "Click" event is firing only this is in page load event, i want this fire in btton click event, how its possible?
[code]....
i have an form with an button and some input controls. some time due to input problem i may get error after that if i refreshed the page then that time the button click event has fired, how to avoid this kind of bad event fire.
View 3 Repliesin my web form i have a department dropdown box, in its selectedIndexChanged event i have to fill the equipment dropdown box and in equiment dropdown selectedIndexChanged i have to fill out the other textboxs.
the depratment dropdown box get its value from sqldatasource.
[code]....
what i want is when i run the page, it shows the very first deparment in the list, and according to that it should pop up the values in the other fields, means it should show the values in the equipment dropdownbox and from that one it should pop up the values in the other textbox.
here is my selected indexchanged event for department dropdownbox
[Code]....
I have designded a asp.net server control that have an embeded javascript file.
document.getElementById("div_Messages_Back").style.left = 0;
document.getElementById("div_Messages_Back").style.top = 0;
document.getElementById("div_Messages_Back").style.width = document.documentElement.clientWidth;
document.getElementById("div_Messages_Back").style.height = document.documentElement.clientHeight;
document.getElementById("tbl_Messages").style.left = (document.documentElement.clientWidth - 250) / 2;
document.getElementById("tbl_Messages").style.top = (document.documentElement.clientHeight - 120) / 2;
function btn_Close() {
document.getElementById("div_Messages_Back").style.visibility = "collapse";
document.getElementById("tbl_Messages").style.visibility = "collapse";
}
I want the first 6 line of my javascript file run at runtime. But I recieve error at runtime:
Error: Object Required.
How do I create a new event in a base page class that fires after all derived pages have fired their load events but before any controls fire their load events.
The following code fires the event before the derived page's load event. I want it to fire the event after the derived page's load event but before all control load events:
Base Class:
Public Event FirstLoad(ByVal sender As Object, ByVal e As System.EventArgs)
Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not IsPostBack Then
RaiseEvent FirstLoad(sender, e)
End If
End Sub
Derived Class:
Private Sub Page_FirstLoad(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.FirstLoad
'Stuff here happens before controls load but only on first page loads'
End Sub
I have a update panel on the ASPX page,When thepage loads the content in the update panel shouldnot load ( Update panel should show the Updatepanel progress control) but after page load update panel contents should load . How do i get this efect.
View 3 RepliesI have an update panel in a user control and I am adding multiple instances of it for example 5.
When that update panel refreshes the page load occurs 5 times.
How can I prevent it only for once?
I am using a third party gateway. The third party gateway does not support query-string , so i will need to post the form to pass the values to the given URL and another thing is that they don't expose the web-services so we need to use their page and that means we need to host it in an iframe in asp.net
so what i did is that i have hidden fields that will be used as parameters as depicted below
Code:
<input type="hidden" name="p1" value='4635' />
<input type="hidden" name="p2" value='Reference_test' />
<input type="hidden" name="p3" value='Purchase credits' />
[Code]..
Now the purpose of this , is to load the iframe after the page load event of the asp.net gets fired.
Now my problem here is that when the iframe loads , it does not pass the parameters to the url that is being set in the iframe.
I have attached the example, project. (2kb)
When you run the project you will notice when the iframe loads there is an Error
"NO VCS ID"
now this means that the parameters were not passed when the Iframe loads , i can understand because it seems like iframe does not do a full form post. so to demonstrate what i want, click the proceed button and you will notice it will give you a page with no errors and it will be a page where credit card details are required , i want to iframe to load that the first time.
i'm trying to learn about user controls. I created a user control that has a textbox and a button. What i'd like to be able to do is when i click the button in the user control, populate a label in the aspx page. I understand that i could just have a button on the page that uses some properties on the user control to get that information.. but i'd like to know how to do it with the button the user control.. the reason for this is the button is just an example.. a learning tool. if i can get this working, i'd likely be putting thing in the user control that might require this kind of passing information. Anyway.. i've found some c# examples that i tried to get working as vb.. but once started getting into the delegates and events.. well.. it made me turn to this post.
View 3 RepliesI have a form in user control which submits data in database and clicking button. how to attach this button press even directly in the aspx page. I do not want to make delegate and want to use default event.
View 1 RepliesI have a user control that contains a repeater. We have added some paging and sorting into the user control and it all works well.
What I need now is a nice way to catch the OnItemDataBound event of the inner repeater and then bubble it up to be accessible directly from the user control from within the page.
We have tried catching it and then declaring it in the user control but it just won't work.
