On my page I have a textbox inside my insert template and a label outside the insert template. I'd like to populate the label as text is entered into the textbox.
my page uses VB.
TextBox id="headlineTextBox"
Label id="headlineLabel"
[Code]....
I've been trying to find a solution to my problem for about 2 days now, and have found nothing. I am new to .net and not really sure how to accomplish this. I have 4 tables in a database, Vendors, RepairCos, Cons, ConRepairHistory. What I'm trying to do is make a page called SendOutForRepair.aspx that has a insert item template where the first control is a dropdownlist that is attached to the Cons table (got this figured out) and is populated with the Serial Number field. I would like the selection from the dropdownlist to populate the 2nd control (VendorID) that is also from the Cons table.
example record from Cons Table: Serial number VendorID
508585 1
so when 508585 is selected in the dropdownlist, it would populate VendorID with 1 (this is my issue)once this happens, the user would fill in the other fields (hours, issue, repairco (also a dropdownlist linked to RepairCos table), RA Number, DCI, DPU, DRB, Cost, Record (which is a identity field and primary key for table) and when the insert link is pressed will insert all 11 fields as a new row in the ConsRepairHistory table. so the new record in the ConsRepairHistory table would look like:
Serial Number VendorID Hours Issue RepairCoID RA Number DCI DPU DRB Cost Record
508585 1 2250 alarming 2 20222 11/16/2010 11/17/2010 null null 3
the RA Number, DCI, DPU, DRB, Cost all allow null values.
I am working on a project where the customer has a large database of products, they want to select the product by the id number and I thought it best that the description also show up. What I have is a dropdownlist that is linked to the id number in the database table and that works just fine. My problem comes when populating the corresponding description from the table into either a textbox or label(doesn't matter which one I use) I can accomplish this without ajax just fine but we would like to reduce the postbacks to the server. I have never used ajax before Here is my code from the aspx file.
[Code]....
Here is the code in the cs file
[Code]....
I am trying to Populate a label or a textbox a Primary Key Value from a Data base. My goal is to enter this value into serveral other tables in the same DB. The DB is called Record_Review.mdf and it is local to this machine through asp.net. The table im pulling from is tblDemographics and the column I want to use is CaseID. The bit of code i got so far is:
[Code]....
and i think i need to do something like,
lblCaseID.Text = ds.tables[0].rows[
"CaseID"].toString();,
I've been trying to find a solution to my problem for about 2 days now, and have found nothing. I am new to .net and not really sure how to accomplish this. I have 4 tables in a database, Vendors, RepairCos, Cons, ConRepairHistory. What I'm trying to do is make a page called SendOutForRepair.aspx that has a insert item template where the first control is a dropdownlist that is attached to the Cons table (got this figured out) and is populated with the Serial Number field. I would like the selection from the dropdownlist to populate the 2nd control (VendorID) that is also from the Cons table....
View 1 RepliesI am being redirected from page1 to page2 as follows:
Response.Redirect(Request.ApplicationPath +
"/page2.aspx?Code=" + searchTextBox.Text);
In page2, I would like to populate a textbox i.e. txtCode using the passed in value from page1.
This is what I am doing:
txtCode.text = Request.QueryString["Code"].ToString();
Question:
Lets say I am redirected from page1 to page2 and so the txtCode is populated. Then I press a button to populate a grid based on this txtCode value. So far so good.
Now for my second page, while in page2, I change the value of txtCode and press the button. The code still retrieves the value from querystring which is the previous value and I do not want that.
Do you know how to solve this ?
there is a requiredvalidator control on txtCode which says it has to have a value.
And I do not mind using a session if it is easier to solve this problem.
This is what I have in page2.aspx
[code]....
I'm new to .net but I'm developing this website which needs some dynamic data inserting so I'm using asp.net 3.5 c#. I've got it working on my local machine but as soon as I upload to the server it no longer populates the label fields. I'm not getting any error messages, the rest of the page appears as normal. So I know this is like asking how long a piece of string is, but what is going wrong here, as I say it's working locally just silently failing on the server. I've tried just populating the label field with a hardcoded string and even that's not going through, it's almost as if the class can't see the label.
View 4 RepliesI have a gridview with the following Template Field
<asp:TemplateField HeaderText="ADDRESS" SortExpression="CAST#">
I have a label , which has 1000 as default value .
And i have a textbox where user will input the value ...
I want to sum the total value of label and textbox and show in the same textbox .
Here am using one textbox ...
My problem is as follows:I have a gridview that get populated from a stored procedure in my MS SQL database. This gridview has a column that is a link field that I click to navigate to a new page that should display the correct info in the relevant labels.So the gridview returns say five diffrent rows of companies (and this work great by the way) and lets say that the 'company name' is the link field column that I meantioned earlier. So now I the company name and this navigates me to the Company.Aspx page, which so far is all working well.What I cant seem to get right is how to pas the correct row of the the passed dataset to display in the correct label fields, here is a brief snippet of what I mean:
if (Session["objDataSet"] != null)
{
DataSet dsCurrent = (DataSet)Session["objDataSet"];
[code]...
This is the first time I have played with the web part of Visual Studio and I would like to know how to:
1) When A user selects a date from the calendar it will populate the grid with available classes. (I have already setup the query however I don't know how to execute it using the text from Label1).
See picture, "Label1" will show the date from the selected date on calendar, from there I want the label to populate the Grid with available classes.
I have a column in a table that contains a message and I want this message to be displayed in a label. Here is my code which currently doesn't populate the label.
Protected conString As String = ConfigurationManager.AppSettings("sqldirectory")
Dim cnn As New SqlConnection(conString)
Dim cmd As New SqlCommand("select message from [database].[dbo].[table]")
Dim dr As SqlDataReader
Try
cnn.Open()
dr = cmd.ExecuteReader()
lblMsg.Text = dr(0).ToString
Catch ex As Exception
dr = Nothing
Finally
cnn.Close()
End Try
Say If got these dates in a TextBox 2010/06/19,2010/06/20,2010/06/21,2010/06/22,2010/06/23, i want automicly my Start label to pickpup the lowest date and Label End to pickup the highest Date Start: [2010/06/19] End: [2010/06/23] between brackets is my label
View 16 RepliesI'm going to try to explain this the best I can. I have a datalist that is displaying a large amount of data based off a CollectionID number. Within each set of data are CollectorID numbers. Now there can be several different CollectorID numbers tied to each CollectionID number. So therefore, the same data is being duplicated several times with the different CollectorID number. What I would like to do is concatenate all the CollectionID numbers into a string that are related to the CollectionID number and populate that into the corresponding label.
I've tried modifying the stored procedure to concatenate the CollectorID rows from the table they are located in but that seemed like a very large challenge.
My latest attempt involved removing the CollectorID from the original query. Then I wrote a datareader on the ItemDataBound event grabbing the CollectorIDs but it is missing the first CollectorID in each set.
I am using asp.net 3-tier architecture, language c# for creating a web application. In presentation layer, I want to populate a textbox when I select an option from a drop down list. Under the code sample from .aspx page is given:
<asp:TableRow ID="TableRow4" runat="server">
<asp:TableCell ID="TableCell5" runat="server">
<asp:Label ID="lblCat" runat="server" Text="Product "></asp:Label>
[code]...
I have always had problems with creating loops so here I go again.
I have a dataset populated with 1 column and multiple rows. What I am trying to do is create a page that will be used for emailing multiple users. The names will need to be separated by a semi colon.
I have a dynamically generated dropdownlist, that lists e.g. Company Names. I want to be able to select a particular Company and display associated information e.g. Name, Address, City, State... etc. in text boxes adjacent to the list.
I am trying to fire the following code from the dropdownlist "OnSelectedIndexChanged" property, but cannot 1) get the code to fire upon selection, and 2) populate the text boxes...
[code]...
Cannot populate the textbox with selection from dropdownlist
[Code]....
I have a button on asp page when pressed enter loads a value in the textbox the code of which is
[Code]....
when i run this i get error Null ReferenceException was unhandled by user code
Object reference not set to an instance of an object.
I would like to have a date(txtDate), that is inputed into a txtbox via a calender, auto populate another textbox witha date 45day(txt45Date) in the future as well as 90 Days(txt90Date)? I have done an auto calculation before but this was with digits not dates. Is this is possible? If so will my attached script work
[Code]....
I am very new to .NET platform (from a PHP background) and I am developing a simple multi-step online form. The user can come back and edit the form after they have initially completed it.User clicks edit form. The information saved in the database is retrieved and populated in the form elements like textbox, dropdown box, image files. And this is all inside a wizard control.Â
I can do this in a gridview using datasource and databind but the datasource doesn't seem to work with wizard.
i have been learning asp.net 3.5 and i have ? if someone could help me out
i have a datagridview using a sql database and using textbox lastname
i have been trying to setup a second textbox for first name
what im trying to acomplish is being able to populate the gridview if only one textbox has a name in it
it works fine if i put in a first name in textbox1 and a lastname in texbox2 if i leave one textbox empty it want populate nothing.
How can i put and populate the textbox inside the gridview during runtime? i mean the number textbox depends on the number of data from the database.
View 4 RepliesI am using a textbox and button to get the user input (account number), this will be used as input to a data access class object (SQL) when the button is clicked. This action should populate the Formview control. I have bound the Formview control to the SQLdatasource and configured the SQLdatasource control to the textbox.TEXT property. What am I missing? What do I need to add to button_clicked event to get all this to work? One other thing, the textbox is in a table area separate from the formview control. I have each of the templates inside of the formview control in tables. The input textbox and button are displayed but the formview control is not, all of this is in a master/detail object.
View 6 RepliesI have a drop-down list that is wired up to a datasource from one table to retrieve a Vendor ID and Vendor Name. This ddl is outside a FormView that is wired up to a datasource containing Vendor contracts.
When I choose a Vendor from the ddl, I am able to populate a textbox outside of FormView with the Vendor ID from the ddl. However, what I need to do is populate a textbox within FormView with the Vendor ID. FormView is in Insert Mode by default since my page will be used for Adding Contracts only.