Web Forms :: Radio Buttons In User Control With Complicated Layout?

Mar 8, 2011

I have a user control I'm building that has a table layout with two sets of radio buttons, like:

how I could use a radiobuttonlist for each set of vertical buttons within this layout, unless I used a rowspan on each col, but that seems problematic from a layout perspective? I would rather use a RBL from a programming standpoint.

If I instead used a set of radiobuttons with a groupname for each, how do I get/set the selected button (for each set) from outside the UC?

View 2 Replies


Similar Messages:

Web Forms :: Clicking Radio Button In Web Control Causes All Other Web Control Radio Buttons To Fire Postback?

Feb 8, 2010

I have a web application that shows a page containing between 6 and 20 AJAX UpdatePanels, contained with Custom Web (.ascx) Controls.

You can see an example of such a page here:

[URL]

The problem I'm getting is that when the user FIRST clicks any of the radio-buttons on any of the controls in the page, ALL the radio buttons that have an active selection ALSO fire an rb_CheckChanged event (see application log below). On subsequent radio-button
clicks, only that RB fires the event (as expected).

This behaviour is having a dramatic impact on performance. The page loads quickly, and a "normal" RB click provides an AJAX update correctly within 1 second. The problematic first RB click, however, takes up to SIX seconds to process, which is unacceptable from a user experience standpoint.

Developed in VS.NET 2008, ASP.NET 3.5. Also I converted the "Web Site" solution to a "Web Application" (pre-compiled) and got the same performance (still too slow). Release builds run only marginally faster than debug builds.

Why would a single RB selection change cause all RB's that have a "selection" set on them to also fire? (The "selection" is determined through database settings every time the control is populated, which is called from within the parent page control's Page_Load function. This selection is determined also at first page load, since all the controls get populated then, so why would the clicking of an RB cause them all to fire an event, and only once? That's what I don't get...)

Not sure if this is an AJAX issue, or general ASP.NET UI issue, so I'm posting in two forums on this one.

View 5 Replies

Web Forms :: Image Control With Radio Buttons?

Jan 28, 2011

I need a control which can hold an image and two radio buttons, like the one we have when we upload a pictures on fb / orkut. 1. Image 2. Delete radio button. 3. Cover radio button. [Set this image as cover of album]

i have created a user control with these three things. On my aspx page on click of a button i need to add this user control. Means, user will select the image using FileUpload and when he clicks on the button this user control should be loaded. I am able to load the control. Check the following code.

[Code]....

1> All images come on new line i want them next to each other.

2> How to detect which radio button is clicked as i have more than one images, and all have radio buttons.

3> How to capture click of radio button from aspx page?

4> If there is some other way to achieve this let me know.

Searched on google but could not find a solution for this.

View 3 Replies

SQL Reporting :: Give The User 3 Options In The Form Of Radio Buttons

Jan 8, 2010

I have a report that I would like to give the user 3 options in the form of radio buttons. How do I implement this?

View 2 Replies

C# - Radio Buttons Not Working When Binded With DataList Control?

Jul 23, 2010

When i tries to bind a radio button in a datalist it becomes multiselect as its name property becomes different even when i used GroupName to be same.

How can i make it act as radio button only.

[code]....

View 1 Replies

AJAX :: Use Databound Radio Buttons To Control CollapsiblePanelExtender?

Aug 17, 2010

I am using .Net 3.5 in VS 2010. I would like to use a couple of radio buttons, that are bound to data, to control the Expand/Collapse of a CollapsiblePanelExtender.

I have found several threads on the web that suggest using JavaScript to control the CollapsiblePanelExtender with a RadioButtonList, but I cannot $find the control in the JavaScript.

I have also found several threads that suggest using custom radio buttons, but I don't see how to do the databinding for these.

View 2 Replies

Looping Through Each Group Of Radio Buttons And Getting The Text Of The Selected Radio Button?

Mar 21, 2010

i have a table which looks something like the following

<table id="Table1" border="0">
<tr>
<td><b>1.</b> Question 1</td>[code]....

how do i go about looping through each group of radio buttons and getting the text of the selected radio button ?the code displayed above is created dynamically ... in my aspx file i have the following code

<asp:Table ID="Table1" runat="server">
</asp:Table>

View 3 Replies

Checked Radio Buttons - Display Three Image Buttons

Mar 4, 2010

In my form i have three radio buttons and nine image buttons, three image buttons per radio buttons

If the user check one radio button, the respective three image buttons only has to be displayed.

In a single time one radio button only can be checked the rest two would be unchecked

Here i have pasted the aspx file design source

[Code]....

View 4 Replies

How To Consume Razor User Control OR MVC User Control In Layout Page

Mar 5, 2011

It's simple to create both user control from the two world : ASP.NET+Razor or MVC 3.0.But i do not known how to consume the user control FROM the razor"_layout.chtml" page.I want to put such thing within the layout page: <uc:MyTag Prop1="" Prop2="" />So i need to declare this directive at top of the layout file : <%@ Register TagPrefix="uc" TagName="MyTag" Src="Controls/Mytag.ascx" %>

View 1 Replies

Web Forms :: Multiple Layout Varieties For A Single User Control?

Feb 2, 2010

I have a user control that contains an image of a product along with some product details.

If the product image is landscape, I want to render the control one way, and if the product image is portrait, I want to render the control a second way.

Example HTML Layouts (drastically simplified):

<div><table><tr><td>
<p><strong>XXXXXX</strong></p>
</td></tr><table></div>

versus

<div><table><tr><td>
<p><em>XXXXXX</em></p>
</td></tr><table></div>

Right now, both layouts are rendered. How can I conditionally render one layout and not the other?

View 13 Replies

Web Forms :: Dynamically Populating Radio Buttons?

May 10, 2010

I have a writing a web page that will use several different types of control. The control types will depend on the data being read from a SQL database. The following is my code that decides what control to add to the page:

Select myReader.GetString(1)
Case "DatePicker"
Dim bdpAnswer As BasicFrame.WebControls.BasicDatePicker = New BasicFrame.WebControls.BasicDatePicker()
bdpAnswer.DateFormat = "dd/MM/yyyy"
divAnswerContainer.Controls.Add(bdpAnswer)
Answers.Controls.Add(divAnswerContainer)
Case "DropDownList"
Dim ddlAnswer As DropDownList = New DropDownList()
divAnswerContainer.Controls.Add(ddlAnswer)
Answers.Controls.Add(divAnswerContainer)
Case "RadioButton"
Dim rbAnswer As RadioButton = New RadioButton()
divAnswerContainer.Controls.Add(rbAnswer)
Answers.Controls.Add(divAnswerContainer)
Case "TextBox"
Dim tbAnswer As TextBox = New TextBox()
divAnswerContainer.Controls.Add(tbAnswer)
Answers.Controls.Add(divAnswerContainer)
End Select

View 4 Replies

Web Forms :: How To Show An Image On Selecting Two Radio Buttons

Jan 8, 2011

I have two radiobutton list .I want show an image on selecting two radiobutton in asp.net c#..I write the code in page load but its so me an error Object reference not set to an instance of an object. tell me code for it and in which event i have to write that code.

View 8 Replies

Web Forms :: Radio Buttons To Turn On / Off Groups Of Controls?

Dec 28, 2010

I've got 3 groups of controls each of which I want enabled/disabled depending on which radio button the user has clicked.

The code *works*, but daaaaaayuum the postback time from a radiobutton click is long.

I suspect my approach is the noobish way, and that there's a slicker way to achieve this control-groups-enabled effect.

View 7 Replies

Web Forms :: Show Dynamic Data And Radio Buttons From Db?

Mar 8, 2010

I am pulling some dynamic data from database SP (data will change). I need to show that data into row format with radio buttons and i need to retive same data from the page (as user selection on radio buttons values) to save data to DB. create such page with data.

Retrive data from DB like below (pic)

Page need to display like below (pic)

View 3 Replies

Creating A User Control With Variable Layout?

Oct 13, 2010

I have a user control which contains a number of child controls. I want to be able to change the layout of the control (i.e. change the markup surrounding the child controls) via a property of the user control, but I don't want to have to duplicate the child controls themselves. This precludes using, say, a MultiView with different versions of the layout in each view, since in that case I'd have to duplicate the controls. I'd also rather use markup than emit the code for the control directly (as you'd do in a server control).

To give a contrived example, say I have a label and a textbox. In one layout, I want the label and textbox to be contained by divs and laid out on top of each other. In an alternate layout, I want them to be contained side by side in a table.

Should I just go ahead and duplicate the controls between each view? It seems like a violation of the DRY principle, but I'm not sure if I have much choice. A partial solution would be making the views of a multiview into naming containers so that I could at least save myself the time of having to prefix the duplicate control IDs with something to make them unique.

View 3 Replies

Web Forms :: Validating Radio Buttons With Custom Validator Within A Masterpage?

Jan 17, 2011

I have radiobuttons within a datalist. The page where they appear is within a master page. The method I had in mind of achieving the validation is with a custom validator and the following sub:

[Code]....

The problem with this code is form1 is not declared. As it is passed in from the master page.

I also have tried another method as follows:

[Code]....

With this sub:

[Code]....

I then get the error Microsoft JScript runtime error: Object expected

Here is the datalist. I need to make sure the user selects an answer for each question:

[Code]....

View 16 Replies

Web Forms :: Multiple Radio Buttons Are Set As TRUE In Post Back?

May 9, 2010

In my code, I cannot use a radiobuttongroup due to formatting constraints. This is a page where the user can update the data. So I have

<asp:TableCell ID="TableCell1" CssClass="answer" runat="server">
<asp:RadioButton ID="PatientYes" GroupName="Patient" runat="server" />
</asp:TableCell>
<asp:TableCell ID="TableCell2" CssClass="answer" runat="server">
<asp:RadioButton ID="PatientNo" GroupName="Patient" runat="server" />
</asp:TableCell>

If I have the case where one button is set when the page is displayed and the user changes to the other value, BOTH are coming back as TRUE. How can I just get the value selected by the user?

View 1 Replies

Web Forms :: Process Radio Buttons As 'group' Allowing For Multiple Selections?

Feb 25, 2011

the form has 15 items to choose with radio buttons, any number can be selected. I would like to process them as a 'group' so I can do something like loop thru them, checking if each one has been selected to build a list and also be saving them to a table row, etc but it seems all the designations as a list or group make it mutually exclusive. just looking for better coding than checking them with an if statement or similar so the question is if there is some way to designate the radio buttons as a group but no force the group to be mutually exclusive

View 4 Replies

Forms Data Controls :: Create Columns Of Radio Buttons That Are Linked?

Jan 4, 2010

I have a table, that contains a number of rows, in each row there are three columns that are mutually exclusive. What I need is to be able to have radio buttons that are linked across the three columns.

tocid
mandactionid
action
yes
no
notapp
comment
1
1
Action 1
1
0
0
Comment 1
1
2
Action 2
0
1
0
Comment 2
1
3
Action 3
1
0
0
Comment 3

I'd like for where there is a 1 for it to display a checked radio button, and where there is a 0 for it to be unchecked. This can then be edited by clicking the radio in another column where necessary.

View 1 Replies

Forms Data Controls :: Referencing Radio Buttons In A Form View?

Jan 12, 2010

I have a formview that runs of an SQLDS, very simple stuff. Inside that form i have various fields, one of them is a credit field, one of them is a debit field. Now i have put a radio button list with two radio buttons (credit and debit). What i want to do is when the "credit" radio button is enabled i want the "credit" text box to be enabled and visa versa.

I know how to reference an object inside a formview, but i am confused, do i reference the radio button list and then the list items inside it or?

View 1 Replies

Web Forms :: Create Dynamic Radio Buttons In Webpage And Then Access Their Values In Postback?

Mar 24, 2011

I need to create dynamic radio buttons in my page, and then access their values in postback

I create the buttons using the following code:

[Code]....

In the post back I try to access the radio buttons using their created ID:

[Code]....

But it seems that the find method is never finding the Radio button control.

View 1 Replies

Forms Data Controls :: Radio Buttons Are Not Mutually Exclusive When Used In A Repeater (or ListView)

Feb 15, 2011

"Radio Buttons Are Not Mutually Exclusive When Used in a Repeater" according to KB #316495 http://support.microsoft.com/kb/316495. This bug also exists with ListViews, and I am having a hard time developing a workaround. Is there a solution or workaround available? I'm using Visual Studio 2010.

(Here is my ASPX. I want rbGroupedSession and rbFees to be mutually exclusive. Databinding and setting controls visible attribute to true/false is done in the code-behind. I'm also setting the RadioButtons "GroupName" property correctly in the code-behind, but it gets changed when rendered in the browser -- which is bug KB #316495)..

[Code]....

View 5 Replies

Forms Data Controls :: Selecting Radio Buttons In A Gridview With Dataset From Linq Query?

Oct 13, 2010

I've got a gridview that will allow clients to edit options they've already entered on another page. The gridview has three radio buttons in it each with a value of 1,2,3. The option value in the dataset is 1,2 or 3 respectively. I would like to have the radiobutton with the corresponding value selected in the gridview so they can see what they previously chose and will then be able to edit, if they wish.

Here's my code so far:

[Code]....

View 6 Replies

Web Forms :: ASP:TABLE And Get The Postback Data From A Programmatic Generated Radio Buttons In TableCell Object

Sep 13, 2010

I am having a bit of trouble trying to get teh postback data from a programmatic generated radio buttons in TableCell object. I have the following ASP user control:

<%@ Control Language="C#" AutoEventWireup="true" CodeBehind="wcntrlCallFlow.ascx.cs" Inherits="CallEvaluation.wcntrlCallFlow" %>
<style type="text/css">
.TableDev
{
width: 100%;
border-style: solid;
border-width: 1px;
border-color: Black;
}
.HeaderRowStyle
{
width: 100%;
border-style: solid;
border-width: 1px;
border-color: Black;
background-color:#33CCCC;
}
.DetailRowStyle
{
width: 100%;
border-style: solid;
border-width: 1px;
border-color: Black;
background-color:White;
}
</style>
<asp:Table ID="tblControl" runat="server"/>

I generate the TableRow and TableCell base off XML data file. When the submit occurs I can not access the data values from the radio buttons that are generated. I try to get the data in the following manner:

if(Request[objRadioName].Checked)
{
this.value = 5;
this.ReCalc();
}

I notice that in the Request object the table row name is passed back like: "wcntrlCallData1$wcntrlCallFlow1$CallFlow".

View 4 Replies

How To Display Radio Buttons Accordingly

Jan 25, 2011

i am developing a quiz website in which i want to display question and then radio buttons according to the number of choices of that question dynamically by accessing from db.

i have displayed it in labels but it display one question and one radio button and one choice and question repeats according to the number of choices... as follows

Q#1 What does asp stands for?

radiobutton All standard pages

Q#2 What does asp stands for?

radiobutton Active Server pages

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved