Web Forms :: Web.config File - Worked In Development Server But Not In QA Server?
Mar 3, 2011
Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine. Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
I created a http Module following this tutorial. The module just displays a simple "Hello from OnBeginRequest in custom module.".I've referenced it in web.config and then, to satisfy my scenario (at work we need to see a module in action for all websites on a server, with the minimal configuration) I installed the module in the GAC, then I edited the "global" web.config in order tomake the module work for all the my web applications
We recently migrated a web app from one Prod server (Prod 1) to another server (Prod 2). There is a session varialbe checked inside the page load event of the default master page. I have enabled session state both in web.config as well inside the pagedirective. The compilation went through without any issue. The web app is also running just fine on the server but the log file keeps logging a warning message. There is no run time error.
"System.Web.HttpException: Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. Please also make sure that System.Web.SessionStateModule or a custom session state module is included in the <configuration><system.web><httpModules> section in the application configuration."Any idea why this is happening on one server vs other?
We have a web application that makes a call to a remotely hosted ASMX service that worked in Server 2003 under IIS6. We are now migrating it to a Server 2008/IIS 7 setup and it doesn't appear that the application makes the call to the remote web service anymore. We ran Wireshark and don't see any traffic to the service URL. It seems to throw a 404 error without trying to connect.
Is there some security policy or restriction in Server 2008 or IIS 7 we need to set to allow an ASP.NET application make a call to a remote web service? We are using Network Service as our application pool user, but also tried using Local System as a troubleshooting step. In addition, the same code works if run from a console application on the server instead of the web application.
Is there some setting under IIS7 or server 2008 that would be causing this?
I have modified a part of code of an existing web application. Once it worked fine on my local machine, I moved it to the common server. But, when different users hit the common server, the web application is behaving differently. I tried stopping and starting the website on the common server and it worked fine for sometime around a day and again it started working differently for different users. Then I tried to restart the IIS on the common server and it worked fine for once and again bounced back.Can anyone please suggest the areas where I can check to resolve the issue.
I'm getting "Cannot connect to ASP.NET development server" almost every time I stop the ASP.NET server before restarting the project in debug mode. It can take between 15 seconds and 2 minutes to get the error message, and Visual Studio is frozen.
Sometimes I get three in a row, and I have to wait 2 minutes each time, or go into Task Manager and kill to process. Then I have to start Visual Studio 2010 again, which is at least three times slower than Visual Studio 2008 to open.
It's *extremely* annoying. I know I don't have to close the server if the code has changed, but sometimes I simply want to restart my website in debug mode (there is a cache on most web service calls, so this clears the cache). A workaround is to add "foo" code to a class and restart the project.
I'm running Visual Studio 2010 Professional on Windows Server 2008. I'm running the Visual Studio Power Tools too, with the latest update.
I used Ajax script Manager in new version of my and when i ran on Visual Studio server it worked fine and never shows framework failed error but when i installed on IIS 7.0 Vista webserver and ran across it i got his error. Can Anyone helpme out in solving this issue?..Web.config file:
I have created my site using ASP.NET Personal Starter Kits 3.5. I use Visual Studio 2008 only . .with its built-in SQL Server (2005 Express) ... my database in App_Data is ASPNETDB.MDF ...
I have created some of my tables also ....in ASPNETDB ..
In my local PC the site was running fine ...
But when I publish my site on production server it doesn't work and shows the following error
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's configuration tag to point to a custom error page URL.
My hosting provider gave me the connection string to connect to the SQL Server 2005 but it doesn't work...
I don't understand why my site was running fine using the production SQL Server 2005 in my local PC when I include ASPNETDB.MDF file in App_Data in my local pc only ..if I remove file ASPNETDB.MDF from App_Data of my local pc ... the site stops working ...
Can anybody tell em how to fix this ... !! I am very tensed since last 3-4 days
how to transfer my data from devlopment server to production server ,i have already records exist in my database if i go for script then how can i transfor record in script i can transfor only table ,procedure and views.I am using SqlServer 2005.
I want to copy a database on a development server to my local server. I am not the server administrator but I have rights to the database. Soon after the wizard Executes the SQL Server Agent Job it fails and the error message says:
The job failed. Check the event log on the destination server for details.
Where do I find this log? Also what could be the problem?
I wonder how often the Web.config file is read by the server?And if the fact of the Web.config file is too large, influences the application performance?
I am wondering the best way to change my connection string based upon which server I am accessing.
Essentially, all of the development is done on our local machines - once we think it is working, we upload it to our development server. In these 2 instances, I want my application to go off of our "dev" connection string for the SQL database in the web.config.
However, once it is published to our production server (for an internal application), I would like the connection string to point to our live db.
I am using the N-Tier model by Imar Spaanjaars - and have it setup like he suggests - In my DAL I have a class called AppConfiguration -
In this class I have a public readonly property ConnectionString() which returns the connection string in the web.config.
This is in an individual class library. What I would like to do is something similar to:
If server is localhost OR devstring return devString else return productionstring
I am having trouble connecting to a ms sql database on the server. The hosting company said that the .sql file was imported successfully, but when I try to use the 'login' or 'create account' features im getting an error page saying:
Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. make sure the user has a local user profile on the computer. The connection will be closed.
I am sure all the connection info is correct so it is really frustrating trying to work the problem. I have listed the connection string in my web.config file to see if anyone can see anything wrong with it.
I am trying to conect to my SQL Server 2008 instance from application in Visual studio unsuccessfully.
This how my Instance appears in SSMS
DETERMIN (SQL Server 10.0.4000 - balloonshop )
Below is an example of a connection string from the book I am following which works if you have SQLExpress on your localhost domain.
I am using SQL Server Enterprise My Server name is DETERMIN (computer) . When I am in SSMS this is how my instance node appears
DETERMIN (SQL Server 10.0.4000 - balloonshop )
Determin is the name of my computer I think its the name of my instance as well not sure, balloonshop is my login. How can I substitute the names properly for the connection string below in order to connect to my instance
can anyone point me to some differences hosting a website on some remote server VS running it locally on dev environment.The reason why i am asking is, If I run my website locally it works fine no exceptions, runs smooth. But when deployed on a remote hosting server. Its like a nightmare to me :(very often i get object Instance not set to instance of object..... I am ok with the error message, But the same situation should happen locally, thats what bothering me:D
I am having problem when i am executing my program on Asp.net Development server and On IIS 7 Server. I have created custom control and put Menu Item inside it. i have written Javscript to avoid postback of control. Its working fine when running program on IIS but having problem when executing on Asp.net development Server.
When I press f5 to run my website a prompt message appears displaying unable to connect to asp.net development server. I have tried to restart vs 2010 but that did not work...
I have just turned on all membership infrastructure, maked an "Administrator" and successfully logined using standard LoginForm control.But when I uploaded my website on hosting server, I couldn't login anymore.I have MachineKey in web.config. Perhaps I need to set something on server (it is my VDS).
I have a webform that has a master page. In the web form I have a dropDownList it has PostBack=True, cause every time I changed the option I concat paratemer (item choosen) at hyperlink's navigate url property, for example I have 2 items:
id text 1 Option1 2 Option2
If the users select Option1 then concat at the url "?option=1" The problem is, that when I choose one option and then click at hyperlink everything goes right, but at the second time I choose an option the browser try to download de page itself aspx. update: even if I click at other hyperlink or link button after choose an option and click the hyperlink, the same thing happens (the browser ask me for download the page aspx)
I have no idea how to avoid this behavior at browser and it happens just at server with the IIS not while I'm testing at VS2008, update: ah I almost forget, if I click "cancel" at the prompt of firefox, then everything goes right again, until the next time I choose other option and click at the hyperlink, then everything goes wrong again...
It somethimes happens that, when I use PrinceXML to convert a webpage to a pdf, the local ASP.NET Development Server stops working...It popups the message "ASP.NET Development Server stops has stopped working"
