It somethimes happens that, when I use PrinceXML to convert a webpage to a pdf, the local ASP.NET Development Server stops working...It popups the message "ASP.NET Development Server stops has stopped working"
View 4 RepliesI am using threading in my c# code to upload multiple files. The code is as shown below:
[Code]....
When I run this code, the ASP.Net Development Server gets stopped without throwing any exceptions. What might be the reason?
Object objFilePath = (Object)Element;
When I run the application using the Web Developer it works fine. However when I run it using local IIS I get the following error:
The resource class for this page was not found. check if the resource file exists and try again. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidOperationException: The resource class for this page was not found. heck if the resource file exists and try again.
Source Error:
Line 81: private void PopulateLanguageList()
Line 82: {
Line 83: DropDownListLanguage.Items[0].Text = (string)HttpContext.GetLocalResourceObject(
Line 84: "Default.aspx", SelectLanguage, Thread.CurrentThread.CurrentCulture);
Line 85: }
Stack Trace:
[InvalidOperationException: The resource class for this page was not found. Please check if the resource file exists and try again.]
System.Web.Compilation.LocalResXResourceProvider.CreateResourceManager() +4038050
System.Web.Compilation.BaseResXResourceProvider.EnsureResourceManager() +23
System.Web.Compilation.BaseResXResourceProvider.GetObject(String resourceKey, CultureInfo culture) +24
System.Web.Compilation.ResourceExpressionBuilder.GetResourceObject(IResourceProvider resourceProvider, String resourceKey, CultureInfo culture, Type objType, String propName) +32
System.Web.HttpContext.GetLocalResourceObject(String virtualPath, String resourceKey, CultureInfo culture) +56
APPortal.Login.PopulateLanguageList() in c:inetpubwwwrootAPPortalDefault.aspx.cs:83
APPortal.Login.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootAPPortalDefault.aspx.cs:20
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +42
System.Web.UI.Control.OnLoad(EventArgs e) +132
System.Web.UI.Control.LoadRecursive() +66
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
can anyone point me to some differences hosting a website on some remote server VS running it locally on dev environment.The reason why i am asking is, If I run my website locally it works fine no exceptions, runs smooth. But when deployed on a remote hosting server. Its like a nightmare to me :(very often i get object Instance not set to instance of object..... I am ok with the error message, But the same situation should happen locally, thats what bothering me:D
View 2 RepliesI want to copy a database on a development server to my local server. I am not the server administrator but I have rights to the database. Soon after the wizard Executes the SQL Server Agent Job it fails and the error message says:
The job failed. Check the event log on the destination server for details.
Where do I find this log? Also what could be the problem?
Is there a way to view incoming requests to a local ASP.NET development server? I'm making wcf service calls from a android app to a local development server. Something goes wrong somewhere along the way, and I need to view what data the server recieves.
Edit: The android app is local too... in an emulator.
Problem: I need to move a local development database to the production server without any of the test data.
I am running SQL Server Express 2008 and SQL Server Management Studio 2008.
To create my ASP.NET Membership 2.0 system I created the DB initialy and ran aspnet_regsql.exe
I then added my own tables manually to store additional information.
I adjusted the web.config file with an application name.
When I ran a sript the application ID name was created and populated in the aspnet_Applications table. My script created a new member created and added to the admin role. Ok so everything go so far.
Now I want to move the local DB to the server. I know the connection string and can change this in the web.config.
My hosting company doesn't provide restore, so I don't think I can backup and restore
Q 1. What would be the best way to move the database across. Bearing in mind I need to clean the database out of test data.
Would it be just generate an SQL Script for the database and run it as a query on the server? And if this is the best way then do I need to set the permissions for the ASPNET user?
Q 2. What is the best way to clear out the data in the local database.?
I'm using the full-text feature on SQL Server 2008 RC2. Everything had been working well until today. I wanted to change the language for word breakers from Neutral to Slovakia. After I did that, I can't perform full-text search anymore. It simply give me no rows. I even deleted the old full-text catalog and created a new one and populated it, but it still gave no solutions. I tried to query dm_fts_index_keywords_by_document on my table and get only 1 row with a display term END OF FILE.
View 3 RepliesI'm trying to write some code that checks the number of days between two dates, when I set the date on my IIS7 server to anytime in the future I get the standard "Internet Explorer cannot display the webpage" screen. This happens if I comment out all my date checking code, with todays date it loads with any future date it doesn't. I've tried rerunning IISReset which makes no difference.
View 1 RepliesSo we have three 2008 R2 Servers where two are configured to be web servers (IIS 7.5), and the third a session state server. I have set the SessionState and MachineKey settings in the applications web.config. After I restart the two web servers I can log into one server, then change the IP address to the other server, and I am still logged in. Success.
I can typically log in/out with any user account I want, change the ip address back and forth, and all is well until some random time between 30-60 minutes when I log in to one server, change the IP address, and the new server asks for credentials.
This is the sessionState setting in both web.configs:
<sessionState mode="StateServer" stateConnectionString="tcpip=xxx.xxx.xxx.xxx:42424" cookieless="false" timeout="30"/>
The application resides under the default web site, and uses the default application pool. I am using forms authentication with a timeout of 20 minutes. I am not receiving any error events on any of the three servers when this happens, and restarting the two web servers fixes the problem for a while. The two web servers are not clustered per-se, but will be served round-robin via a network device.
When running the ASP.NET Development Server, everything is working fine. However, when I deploy my asp.net application to the production server (IIS 7.0 integrated mode, fresh install), my location tags in my web.config file are being ignored.
Case in point: I'm using forms authentication, and when the user arrives at my login.aspx page, the external css & js files are not being loaded...even though I have specified that those files should be available to all users (auth'd or not). However, once the user is logged in, the files do in fact load.
<authentication mode="Forms">
<forms loginUrl="~/Account/Login.aspx" timeout="2880" />
</authentication>
<authorization>
<deny users="?" /> <!-- Restrict anonymouse user access -->
</authorization>
And the exception to my css file...
<location path="Styles/xtools.css">
<system.web>
<authorization>
<allow users="*"/>
</authorization>
</system.web>
</location>
I've verified that the path to the css file is accurate.
--EDIT Forgot to mention, I have tried creating a web.config file in the targetted folder as well...still not working.
I have a div called address which as a textarea. When I click a hyperlink, it toggles the div up and down. After clicking a an asp.net button the div collapses which is fine, but I noticed the url turns from [URL] to [URL] and now the toggle does not work. Here is the script:
$(document).ready(function () {
$('#myAddress').click(function () {
ShowHideAddressBox();
});
$('#arrowIndicator').click(function () {
ShowHideAddressBox();
});
});
function ShowHideAddressBox() {
var str = $("#myAddress").text();
if (str == "Hide") {
$("#myAddress").html("Click here");
$("#arrowIndicator").attr("src", "/Shared/Images/misc/arrow_state_grey_expanded.png");
}
else {
$("#myAddress").html("Hide");
$("#arrowIndicator").attr("src", "/Shared/Images/misc/arrow_state_grey_collapsed.png");
}
$('#checkAddress').toggle('normal');
}
The server-side button click just sets some values in a couple textboxes. In my master page, I have the following line as well:
<asp:ScriptReference Assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
Name="MicrosoftAjax.js" Path="http://ajax.microsoft.com/ajax/3.5/MicrosoftAjax.js" />
the site normally works fine in all popular browsers including firefox, chrome, safari and ie.
but doesn't work in ie 8 when it's redirected via a proxy server and it gives an error saying
"Message: Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near 'DOCTYPE html PUB'."
How can I test an application that I am publishing to a remote provider's IIS7 hosted site, with the VS2008 development server that is built in with VS2008 on an XP Machine?
My membership/roles work perfectly up on the remote host. On ths hosted IIS7 site when I try to access a secure directory it redirects to login, and I am able to login, however when I launch (debug - F5) from VS2008, it will provide that folder/resource, no questions asked. Same build, config, etc... nothing has changed.
I am running XP, and local IIS version installed is 5.1.
My guess is what is happening is that the new format required in the web.config is configured properly for IIS7 deployment, which is why it works remotely, but when running locally through VS2008/XP it is running with an older version on IIS and does not recoginize the new tags.
I have a functionality working ( functionality for making controls visible / true false ) on my development system having windows 2008.
But the same is not working on production server having windows 2003 on IE.
I have created a dynamic Robots.txt file for my application and I have created an redirect entry in my web config in the <system.web> section and it works perfectly in my development environment but once I uploaded the file to my server it does not work and gives me an error 404.Requested URLhttp://www.canadawelcome.ca:80/robots.txt
Physical Path
E:webcanadawelc1htdocs
obots.txt
This is what I have added to my system.web section
I run a web site with VB.Net and Sql Server, at a web host (so I use one instance of their Sql Server db). I now get this nasty message when trying to access the web site: Column 'kryptotext' does not belong to table tabellen. I have seen this before (but with other columns mentioned), and when I spoke to the tech guys they said that the server gives up after five (or so) invalid requests. The old problems I had were due to the fact that I had used Application variables - at least the problems appeared when I added the variable and diappeared when I deleted them.
This time, I have done very little. I ran a new check when some items of a gridview were databound, and if a condition was ok, then a mail should be sent and an update take place in the db. For now, this will not be true, so the new code doesn't fire, and I have now reverted to the old code anyway. I got htis message this morning, and then it has worked the entire day without me changing the code at all, and now it stopped working again, so to me it seems as if it's either not my code's fault, or I somehow flood the db server with requests (but the web site is new so there are really no users yet). One more thing I have added: I imported the Net.Mail namespace to the baseclass I'm using for the aspx pages, but I can't believe that has anything to do with this.
I asked the tech guys again, and the server has been working the whole day. Here's the web site: [URL] I am able to connect to the admin part of the web site, so it's just the public web site itself that doesn't run. What should I do? Edit: Now, 30 minutes later, it works again. I haven't done anything, in fact I had dinner now.
how can I work with 'session' while working on visual studio asp.net development server please? as I found its not working there but working with iis
View 1 RepliesI've a ASP.Net application which utilizes SQL Server Stored Procedures and Web Services using Windows Authentication. The idea is to use the logged in user credentials for invoking the web service (This is critical since the web service use the authentication credentials to assign the owner of the created or updated record) and for executing the stored procedure.When I am using VS.Net integrated web server the result is just fine (May be because this server starts under current logged in user account) The SQL Server SP returns expected results (Even when I execute them from Query Analyzer) and web service credentials is set correctly to the current logged in user. However when I host the application in local IIS it's not working as expectedly. The Sql Server stored procedure returns EMPTY dataset and web service credentials is set to empty.I am using
myService.Credentials = System.Net.CredentialsCache.DefaultCredentials
Bothe the web service host virtual directory and my application virtual directory is using Windows Authentication in Directory Security of IIS.
I created a http Module following this tutorial. The module just displays a simple "Hello from OnBeginRequest in custom module.".I've referenced it in web.config and then, to satisfy my scenario (at work we need to see a module in action for all websites on a server, with the minimal configuration) I installed the module in the GAC, then I edited the "global" web.config in order tomake the module work for all the my web applications
View 1 RepliesCame into work this morning and discovered that my local asp.net developmentn server has stopped working. Im getting the following page :
[Code]....
Im running visual studio of my personal PC withing my company's network.
I used to use VS 2010 and Windows 7 32 bit editions. Now I have upgraded to 64 bit editions.My problem is that every time I run my webform website, development server is set up and when I stop debugging it is closed.On 32 bit versions it was launched just once. Now every time I hit F5.Problem is that many times IE just displays Internet Explorer cannot display the webpageif I press F5 (refresh) once or twice website is displayed.What can I do with it? Other browsers wait until that development server is launched, just IE doesn`t
View 1 RepliesI have a Web App (VS 2010 Beta 2, using VB) and it works flawlessly on the development system. When I publish it, everything works fine unless I use an update panel. If I use the update panel, and try to use something such as a dragpanel, I get the following error.
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; .NET4.0C; .NET4.0E)
Timestamp: Thu, 4 Mar 2010 14:54:25 UTC
Message: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 404
Line: 784
Char: 13
Code: 0
I'm using membership that created by asp.net configuration when you create users with roles when you create a user for your website using asp.net configuration in Visual Studio
After uploading my project and creating the Database, I can't login using the users that i have created, i'm 100% sure im using the right username and password but still can't login but they are working 100% in my local DB
after few search in google i found the solution is to execute the following command:
[Code]....
In my site on every load some session is made through url and single page(say xyz.aspx) is call every time and on the basis of url we create session. When i click on a href tag , page start reloading ,url we created is accurate but data doesn't change every time, means some time it show data on first click, but some time after 3 or 4 click.
I say problem is weird because when i run this on my local server there is no problem, when i run this on my project (visual studio) there is no problem , but when i up this project on my online server it show this kind of error but not every time .
I use data caching to fill dataset. There is no problem in this website since we created this (more than 1 year) and we don't made any change on this page but suddenly it starts showing this kind of error so what kind of error this is.