WebMatrix :: IIS Express Refuses To Serve .cshtml Pages?
Feb 24, 2011
I have been struggling to get WebMatrix to serve any cshtml files. I performed a fresh install of WebMatrix, then started a tutorial which involves creating one small cshtml file. Whenever I try to run the site, I get the following error:
This type of page is not served.
Description: The type of page you have requested is not served because it has been explicitly forbidden. The extension '.cshtml' may be incorrect. review the URL below and make sure that it is spelled correctly.
Requested URL: /Home.cshtml
I tried reinstalling to no avail.
I am running Windows 7 Pro, with IIS 7 installed. (IIS Express is supposed to be able to run side-by-side no problemo)
View 8 Replies
Similar Messages:
Feb 15, 2011
There I was, happily coding webpages, when suddenly it wouldn't run them anymore. Now when I click run I get an error message that looks like this: Server Error in '/' Application.This type of page is not served. Description:The type of page you have requested is not served because it has been explicitly forbidden. The extension '.cshtml' may be incorrect. Please review the URL below and make sure that it is spelled correctly.
Requested URL: /quiz/intro.cshtml
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1
View 3 Replies
Mar 11, 2011
I am building a site with WebMatrix using the razor syntax in .cshtml files. However I'm stumped as to how I can use the normal set of asp.net controls that are found in the toolbox in Visual Studio - eg: calendar, panel, radio button list etc... Is it possible to use these or can you only use Helpers with razor?
View 2 Replies
Feb 4, 2011
When i created a simple site via Matrix which adopts Razor technology by default, i found site automatically display "default.cshtml" if started through "http://localhost:xxxx/bread/" ; however i hadn't set "default.cshtml" as "default document" for this site, even i seek in the "applicationhost.config" i just find
<defaultDocument enabled="true">
<files>
<add value="Default.htm" />
<add value="Default.asp" />
<add value="index.htm" />
<add value="index.html" />
<add value="iisstart.htm" />
<add value="default.aspx" />
</files>
</defaultDocument>
which apparently hasn't "...cshtml" yet. So I am wondering now why in this case the web server actively sets "default.cshtml" as default start page ?
View 5 Replies
Dec 2, 2010
After creating a Empty Template based website with a default .cshtml, I am unable to run the web page using webmatrix beta 3. Following error message I have : Server Error in '/' Application. Specified argument was out of the range of valid values. Parameter name: site Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values. Parameter name: site Source Error:
[Code]....
Stack Trace:
[Code]....
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1
View 1 Replies
Jul 19, 2010
I am new to ASP.NET, I would like to know how to create C# class in seperate file and using it in cshhtml file.
View 5 Replies
Dec 16, 2010
I'm doing something wrong, but for the life of me can't figure out what. (Maybe it's all the beta software I'm using to build this website ;-) )I'm trying to use the Facebook helpers, which use the WebMatrix.Data and WebMatrix.WebData libraries. These work fine from my class files, but apparently I can't use them in my .cshtml files.Anybody run into this? Alle references to classes in these libraries break my site (not my build btw?). And yes, they are referenced.
View 6 Replies
Jan 18, 2011
I'm learning to use webmatrix via the tutorials on the website. I've had success with all table operations, when only using one table. I'm using the following address to access the site uredi_let_padalce.cshtml?LetId=4 and the is code:
[Code]....
The page works if I write: where LetId=4 instead of @0. But if I leave the variable I get the following error: The column name cannot be resolved to a table. Specify the table to which the column belongs. [ Name of ambiguous column = LetId ] If I specify the table name LetId_PadalecId. LetId=@0, then I get the parameter missing error. How could I tell the server which LetId I want?
View 2 Replies
Nov 30, 2010
I would like to use the _ViewStart page to set the master page (layout) used by the views. I have only two different layouts. One for the homepage and one for the other pages (but that may change)I was hoping to add a dynamic property to the ViewModel object in the home page's controller method and then check for it. Something like this_ViewStart =
[Code]....
And in the HomeController Index() add this
ViewModel.IsHomePage = true;
View 2 Replies
Jun 4, 2010
I want my application to serve all of its web pages over SSL, so I added the lines...
<secureWebPages enabled="true">
<directory path="." />
</secureWebPages>
... to my Web.config and the resulting compiler error is:
Build (web): Unrecognized configuration section secureWebPages.
I am running Visual Studio 2008
View 3 Replies
Nov 27, 2010
I have with working with Visual Studio for a while, and using it's web server. I decided I needed IIS 7 for testing certain features. I installed, but I get an error
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME mapI've googled and been able to figure out that aspx pages are not enabled by default, but I can't find the proper method to fix this.
View 2 Replies
Aug 5, 2010
Anybody know how to setup a virtual directory in IIS Express for things like Shared Resources? I can't figure out where to set it up in Web Matrix?
View 5 Replies
Feb 2, 2011
Can i connect to linked Servers on SqL 2008 R2 Express with webMatrix?
View 1 Replies
Oct 16, 2010
I don't have web server account yet so I must test my applications with the Web Development Server under VS 2010 with C# but I read that I couldn't send emails under that server but I also read that I can send email with IIS7 Express and that's the main reason why I've install Webmatrix. Maybe someone can confirm this. So for the moment I am redirecting my emails into a local folder and it is working perfectly. Here is part of the code I've add to the Web.Config for doing that.
[Code]....
As you can see I am redirecting the emails to the D: emp
[Code]....
What are the values of username & password. or others when we use the Webmatrix server and how can I fint hem? It was hell posting this text I think the inserted code was interfering with the HTML of the message or there are bugs in the editor,
View 3 Replies
Feb 24, 2011
I manage a large asp.net site which has previously been converted from static html site to asp.net. For several reasons (mainly SEO) we decided not to rename all the files to .aspx back when we originally converted the site. This was very easy to do by simply adding the buildProvider and httpHandler to the web.config.
<buildProviders>
<add extension=".html" type="System.Web.Compilation.PageBuildProvider"/>
</buildProviders>
<httpHandlers>
<add path="*.html" verb="*" type="System.Web.UI.PageHandlerFactory"/>
</httpHandlers>
Now I am upgrading the site to use Asp.net WebPages with Razor cshtml files. I can rename all the files if necessary, and use url rewriting to make the urls stay the same, however it would be much easier if I could just configure the web.config to tell it to parse .html files as if they were .cshtml. I have searched around quite a bit, and could not find anything equivalent to the PageHandlerFactory for razor pages. It appears as though it is just an internal mechanism in the .net 4.0 ISAPI handler.
The site is currently running on Windows 2003 server and IIS 6. We will be upgrading to 2008/IIS 7.5 in the near future, but I'd prefer not to wait for that. Is there any way to get the .html files to be parsed by razor as if they were .cshtml files?
View 2 Replies
Jan 27, 2011
Now i am learning mvc3 razor. I create a razor mvc project and set a vitural webapp in IIS7 for it , as "localhost/mvc3/". When i do some changes on .cshtml trying to check effects I just find that corresponding page doesn't change even refresh browser. I am not quit familar with the rule & principle on this.
BTW : this post page seems have severe problem because I cannot use the message editor in Chrome / IE9beta : they just leave a stubborn blank area for me.
View 5 Replies
Dec 5, 2010
My existing system has Visual Studio 2008 and Visual Web Developer 2010 Express. But Microsoft web installer for Webmatrix has made Wematrix Launch ribbon menu pointing to Visual Studio 2008. How could I make Webmatrix point to Visual Web Express 2010. To make use of IntelliSense and the debugger, I have to manually launch Visual Web Developer 2010 Express.
View 8 Replies
Oct 10, 2010
I have an annoying issue with Visual Web Developer Express 2010. When I run my web app with CTRL + F5, VS launches two IE pages of my app. When I run the app using just F5, I get one page of IE.
View 1 Replies
Nov 9, 2010
I've found a Webmatrix help article that says MS Webmatrix "publishes the (SQL Server or MySQL) database by creating scripts that run in a database that has been created for you by your hosting provider." That is wonderful, except I can't get it to work when I'm trying to publish a MySQL database (backing wordpress) through FTP (my hosting provider does not support 'web deploy'). Again, no problem, since it is already documented that " FTP protocols cannot be used to publish MySQL database. " But this does not excuse Webmatrix from generating MySQL database install scripts for me. During the publishing step, no database install script is generated - at least that I can tell - and there is no manual option to create a database export / backup / install script.
In short, as Webmatrix goes, I'm dead in the water trying to get my database uploaded to my hosting provider. Does anyone know the trick to force Webmatrix to create the MySQL database install scripts on my local box? Once created, I can take-over the upload and install process.
View 1 Replies
Jan 19, 2011
I'm wondering if it is possible to include Microsoft.Data.Entity.CTP.dll reference to WebMatrix site and if the Compact edition of the database would support it? I'd kinda love use something like
code-first development in my WebMatrix project. I think is even easier than writing SQL-s into the code...
View 1 Replies
Jun 24, 2010
i have a web site that for some reason works perfectly when im running through visual studios, but the minute i publish it my one button in a gridview refuses to work.
View 18 Replies
Oct 25, 2010
I started the Bakery site demo...everything runs fine on my local machine.When I publish the site to production server in w2k8r2+iis7.5 and with .net 4.0 (integrate) pool, my bakery apps not able to connect to the .sdf file.
Error I got is :
Connection string "bakery" was not found. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: Connection string "bakery" was not found.
Source Error:
Line 2: Layout = "_SiteLayout.cshtml";
Line 3:
Line 4: FacebookSocialPlugins.Initialize("[xxx]", "[xxx]","bakery");
Line 5:
Line 6: }
Stack Trace:
[InvalidOperationException: Connection string "bakery" was not found.]
WebMatrix.Data.Database.OpenNamedConnection(String name, IConfigurationManager configurationManager) +132
WebMatrix.Data.Database.Open(String name) +42
System.Web.WebPages.DatabaseConnectionInfo.Connect() +43
System.Web.WebPages.SimpleMembershipProvider.CreateTablesIfNeeded() +42
System.Web.WebPages.WebSecurity.InitializeMembershipProvider(SimpleMembershipProvider sMembership, DatabaseConnectionInfo connect, String userTableName, String userIdColumn, String userNameColumn, Boolean createTables) +70
System.Web.WebPages.WebSecurity.InitializeProviders(DatabaseConnectionInfo connect, String userTableName, String userIdColumn, String userNameColumn, Boolean autoCreateTables) +51
System.Web.WebPages.WebSecurity.InitializeDatabaseConnection(String connectionStringName, String userTableName, String userIdColumn, String userNameColumn, Boolean autoCreateTables) +52
FacebookSocialPlugins.InitializeMembershipProviderIfNeeded() +54
FacebookSocialPlugins.Initialize(String appId, String appSecret, String membershipDbName) +171
ASP._PageStart_cshtml.Execute() in d:xxxakery\_PageStart.cshtml:4
System.Web.WebPages.StartPage.ExecutePageHierarchy() +15
System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) +33
System.Web.WebPages.WebPageHttpHandler.ProcessRequestInternal(HttpContext context) +207
View 2 Replies
Nov 22, 2010
I know we can use the HTML helpers, but how about the strongly typed one's?
Html.LabelFor()
View 1 Replies
Jan 11, 2011
I struggle with publishing 2 databases from WebMatrix using WebDeploy. On Publish settings screen I specify 2 different connection strings, but on Publish Compatibility screen Database names in both destination connection strings are equal. When I return to settings screen, original value is replaced there as well.
How destination server connection strings are evaluated? Here are connection strings from the root web.config file, which are set by hidden parameters in my parameters.xml:
<connectionStrings>
<add connectionString="Server=(local);Database=xxx;Uid=xxx;Pwd=xxx" name="xxx" providerName="System.Data.SqlClient" />
<add connectionString="Server=(local);Database=xxx2;Uid=xxx;Pwd=xxx" name="xxx" providerName="System.Data.SqlClient" />
</connectionStrings>
View 1 Replies
Jan 26, 2011
If I create two websites using the starter site template logging into one shows me logged into the other.
Here are the steps:
Create starter website called website1 Create starter website called website2 Run both websites in the same browser, firefox Register an account in website1 Log out of website1 Log back into website1 Refresh website2 and it shows my login name from website1 Has anyone else encountered this?
View 1 Replies
