WebMatrix :: And Databases To Access The Site Uredi_let_padalce.cshtml
Jan 18, 2011
I'm learning to use webmatrix via the tutorials on the website. I've had success with all table operations, when only using one table. I'm using the following address to access the site uredi_let_padalce.cshtml?LetId=4 and the is code:
[Code]....
The page works if I write: where LetId=4 instead of @0. But if I leave the variable I get the following error: The column name cannot be resolved to a table. Specify the table to which the column belongs. [ Name of ambiguous column = LetId ] If I specify the table name LetId_PadalecId. LetId=@0, then I get the parameter missing error. How could I tell the server which LetId I want?
There I was, happily coding webpages, when suddenly it wouldn't run them anymore. Now when I click run I get an error message that looks like this: Server Error in '/' Application.This type of page is not served. Description:The type of page you have requested is not served because it has been explicitly forbidden. The extension '.cshtml' may be incorrect. Please review the URL below and make sure that it is spelled correctly.
Requested URL: /quiz/intro.cshtml Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1
I am trying to publish a sugarcrm site I created in webmatrix to my site hosted on godaddy, however when i go into the publish settings and enter the server info, passwords etc., I can only get the connection to validate for the FTP protocol setting. When i click the button to test and validate the connection for webdeploy instead of ftp, it tries then says connection timed out. How do I get this to work so that I can publish my site on godaddy?
After creating a Empty Template based website with a default .cshtml, I am unable to run the web page using webmatrix beta 3. Following error message I have : Server Error in '/' Application. Specified argument was out of the range of valid values. Parameter name: site Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values. Parameter name: site Source Error:
[Code]....
Stack Trace:
[Code]....
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1
I am building a site with WebMatrix using the razor syntax in .cshtml files. However I'm stumped as to how I can use the normal set of asp.net controls that are found in the toolbox in Visual Studio - eg: calendar, panel, radio button list etc... Is it possible to use these or can you only use Helpers with razor?
I'm doing something wrong, but for the life of me can't figure out what. (Maybe it's all the beta software I'm using to build this website ;-) )I'm trying to use the Facebook helpers, which use the WebMatrix.Data and WebMatrix.WebData libraries. These work fine from my class files, but apparently I can't use them in my .cshtml files.Anybody run into this? Alle references to classes in these libraries break my site (not my build btw?). And yes, they are referenced.
I have been struggling to get WebMatrix to serve any cshtml files. I performed a fresh install of WebMatrix, then started a tutorial which involves creating one small cshtml file. Whenever I try to run the site, I get the following error:
This type of page is not served.
Description: The type of page you have requested is not served because it has been explicitly forbidden. The extension '.cshtml' may be incorrect. review the URL below and make sure that it is spelled correctly.
Requested URL: /Home.cshtml
I tried reinstalling to no avail.
I am running Windows 7 Pro, with IIS 7 installed. (IIS Express is supposed to be able to run side-by-side no problemo)
I struggle with publishing 2 databases from WebMatrix using WebDeploy. On Publish settings screen I specify 2 different connection strings, but on Publish Compatibility screen Database names in both destination connection strings are equal. When I return to settings screen, original value is replaced there as well.
How destination server connection strings are evaluated? Here are connection strings from the root web.config file, which are set by hidden parameters in my parameters.xml:
My hosting company states they support .net and razor. However after uploading my website made with webmatrix and razor *.cshtml pages. When i visit my website all i get is 404.17 error messages. As an testcase i decided to add an standard .aspx page. Visiting that page gives the same 404.17 error message :-( .
According to my webhoster my web.config is wrong. However that one is generated by webmatrix. Besides my *.cshtml *.aspx a lot of files and directories are added to the bin folder. What can i check and what should my hosting provider check. When using the check compatibility the asp.net version is shown as unknown? My hosting provider claims my site is running asp.net 4.0 in integrated mode and that should be enough.
I want to deploy a website in a computer where no webmatrix is installed. What are the requirement to run the website without webmatrix? And how do I configure IIS to run in startup with the site path?
How can i directly access a .cshtml file in ASP.NET MVC using razor view engine?
For example i have this url: localhost/Home/About. This will load the about site inside the "master" page.
I want to load the about page without also loading the master page. So i was thinking that i could use this url: localhost/Home/About.cshtml. But it's not working.
How can i load a view page without loading the master page?
When i created a simple site via Matrix which adopts Razor technology by default, i found site automatically display "default.cshtml" if started through "http://localhost:xxxx/bread/" ; however i hadn't set "default.cshtml" as "default document" for this site, even i seek in the "applicationhost.config" i just find
I'm new here. Noticed that most posts are related to WebMatrix as a tool, not WebMatrix-WebPages programming. Also WebPages does not require WebMatrix at all. Perhaps there's another forum for WebPages, otherwise I would suggest to split this forum into two. WebMatrix | WebPages,
I have published my site using WebMatrix. In my local folder on my PC I've deleted some unnecessary files. And then published the updated site again. WebMaxtrix never give any indication it is going to delete files that are not found in an UPDATED published site. When browsing to my site and requesing the-supposed-to-be-deleted resources I still get them in my browser.
i want to develop a data access layer ,it can support multiple database like oracle ,Mssqlserver and Mysql using enterprise library and C#.net 3.5 based on database connection
I try to create a wordpress site from the gallery and I get an error that says that it cannot find database. I dont have mySQL installed. I thought that WebMatrix would download and install it. Does WebMatrix Beta 3 expect MySQL to be installed? And if so, which version?
I would really appriciate if someone could show me example of how to use api webservice of another site and retreive content (or whatever data is returned) and publish that content localy on omy own site. Api webservice I´m planning to use has support for HTTP GET & POST and SOAP 1.1 and 1.2.
I created my site with webmatrix and razor.I tryed searching on the net but I'm having hard time finding relevant content.
I'm pretty sure the answer to this question is no, but I just wanted to get some feedback before I go down another path.
Here is my scenario. I have two websites. Website 1 is an internal website that cannot be accessed outside of our domain. Website 2 is an external website that can be accessed outside of the domain, but has access to webservices inside of the domain.
My question is, is there any possible way to display the internal page through the external page without making the internal page external.
I've found a Webmatrix help article that says MS Webmatrix "publishes the (SQL Server or MySQL) database by creating scripts that run in a database that has been created for you by your hosting provider." That is wonderful, except I can't get it to work when I'm trying to publish a MySQL database (backing wordpress) through FTP (my hosting provider does not support 'web deploy'). Again, no problem, since it is already documented that " FTP protocols cannot be used to publish MySQL database. " But this does not excuse Webmatrix from generating MySQL database install scripts for me. During the publishing step, no database install script is generated - at least that I can tell - and there is no manual option to create a database export / backup / install script.
In short, as Webmatrix goes, I'm dead in the water trying to get my database uploaded to my hosting provider. Does anyone know the trick to force Webmatrix to create the MySQL database install scripts on my local box? Once created, I can take-over the upload and install process.
I'm wondering if it is possible to include Microsoft.Data.Entity.CTP.dll reference to WebMatrix site and if the Compact edition of the database would support it? I'd kinda love use something like
code-first development in my WebMatrix project. I think is even easier than writing SQL-s into the code...
Im using the MySql Membership-,Role- and ProfileProvider. If the mysql-server goes offline the site crashes (ofcourse). But when the mysql-server gets back online the site still crashes, complaining that the Role provider cant get initialized because of missing or incorrect schema. If I then make a meaningless change to the web.config (like adding a space somewhere) the site works again.
I started the Bakery site demo...everything runs fine on my local machine.When I publish the site to production server in w2k8r2+iis7.5 and with .net 4.0 (integrate) pool, my bakery apps not able to connect to the .sdf file.
Error I got is :
Connection string "bakery" was not found. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: Connection string "bakery" was not found.
Source Error:
Line 2: Layout = "_SiteLayout.cshtml";
Line 3:
Line 4: FacebookSocialPlugins.Initialize("[xxx]", "[xxx]","bakery");
