What Does IMetadataExchange Endpoint Actually Do
Jul 5, 2010
I'm working on a web service that uses ASP.NET security model (i.e. with AspNetCompatibilityRequirements set to allowed). Like many others, I got an error saying the Anonymous access is required because the mexHttpBinding requires it and the only way to get around it is to remove the mex endpoint from each service as described here:
[URL]
I thought by removing mex endpoint I will no longer able to generate WSDL or add a reference to the service from Visual Studio but to my surprise everything still works. I quickly googled the "mex binding" but most web sites just say it's for "Metadata Exchange" without going into too much detail on what it actually does.
View 2 Replies
Similar Messages:
Feb 8, 2011
What is the advantage of using a Mex Endpoint over setting
[code]....
I am not able to add the service using Add Service Reference. I am not able to get the WSDL using a browser.
2. If I add the tag <serviceMetadata
httpGetEnabled="true"
and remove Mex Endpoint, I am able to query the wsdl using browser and I am still able to add a refernce using Add Service Reference.
Then, What's the specific use of Mex Endpoint.
View 2 Replies
Feb 11, 2011
Does WCF support multiple EndPoint.
View 4 Replies
Jan 4, 2010
I do not understand what is happening here. If I run this same bizApp referenced from a webpage my code finds the endpoint in either my web.config file for the webpage. I copy that same section and paste it into the New version of web page that uses a new WCF that contains this same bizApp and I get a can not find endpoint.
[code].....
View 1 Replies
Dec 16, 2010
I had to move a WCF service (IIS hosted) to a new address. This service is called by a webforms web site on a different site in the same instance of IIS. I checked the WCF service is available and working by calling it directly from a browser.
I then did the following
updated the Service Reference folder in my consuming website updated the web.config servicemodel section (it was auto updated by changing the Service Reference) re-built and deployed libraries using the WCF service to the websites bin folder Stopped the consuming website in IIS and deleted files from Temporary ASP.NET Files folder Re-started IIS and deleted *ALL* files from Temporary ASP.NET files
When I browse to a page that calls the WCF service I get the error;
EndpointNotFoundException
There was no endpoint listening at <<Old endpoint address>> that could accept the message
How can I force my website to use the new WCF endpoint? Do I need to re-start the web server?
View 2 Replies
Mar 14, 2010
I am migrating an ASP.NET Web Service toward WCF. The old Web Service endpoint had a nice extensive description page generated from the comment of the underlying class exposed as a service endpoint. In particular, all available web methods were listed.
Is there a way to emulate somehow this behavior with WCF? At least, how can I customize the HTML content of the WCF endpoint?
View 1 Replies
Oct 2, 2010
I'm trying to expose a webHttpBinding EndPoint using Framework 4.0.
<endpoint address="web" binding="webHttpBinding" contract="MyContract"/>
However, when browsing using WFC Test Client, I see nothing. If I change my Framework target to 3.5, it works fine.
Is there something different in 4.0 to get this to work?
View 2 Replies
Feb 21, 2010
I have a project ("The Project") that references an external web service. I am then referencing that project in an ASP.Net web application ("The Web Application"). When I reference "The Project" in "The Web Application" the app.config is not copied over, which isn't a problem. Does "The Project" take care of know what endpoint to use? Can the web.config override the endpoint URL? I did a test and am not reference the eternal web service in "The Web Application" and everything seemed to work ok. I guess, can I create the same configuration section, that is in "The Project's" app.config and copy it over to the web.config file to override?
Update: I guess what I really need to find out is how to change the end point of a web service when generating the code from adding a "Web Reference". I tried adding a service reference to my code, but the wsdl is not getting loaded correclty or I am doing something wrong. Update 2.0: I forgot about the URL property of the proxy that is generated by the web reference.
View 1 Replies
Dec 28, 2010
I have a Web service currently in an ASMX file. I want to move this code into its own class library project which generates a DLL. I want to be able to drop this DLL into any Web application and have it work. However, without an ASMX file, I have no URL endpoint. How do I get around this? Essentially, I want to run a Web service without having to distribute an ASMX. I just want to distribute a DLL. Can I map the endpoint for the Web service in the web.config, or something? (I think that perhaps WCF might do this, but one look at the config for that, and it feels like the cure is worse than the disease...)
View 3 Replies
Aug 27, 2010
How can i check that which Endpoint is calling WCF Service.
View 1 Replies
Oct 2, 2010
I get "Endpoint not found" when attempting to access my service via the browser at
[URL]
I get "Error: Cannot obtain Metadata from http://localhost:10093/Services/Service1.svc" when attempting to access the same address from the wcftestclient.
If I place a breakpoint in the service implementation it is hit, so I assume the svc file is setup correctly:
<%@ ServiceHost Language="C#" Debug="true"
Service="MyApp.Core.Service.Service.MyAppService,MyApp.Core.Service"
Factory="CommonServiceFactory.WebServiceHostFactory,CommonServiceFactory" %>
Here is my config:
[code]....
View 3 Replies
Oct 13, 2010
We have a C# Web Service that declares itself using attributes. The code-behind file looks like:
[WebService(Namespace = "http://the.web.service.url/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
public sealed class TheWebservice : WebService
{
[WebMethod]
public SomeObject TheFunction()
...
The web services has worked for a long time now. Recently, one request resulted in an error:
The maximum string content length quota (8192) has been exceeded while reading XML data. After searching around, I found that there is a setting maxStringContentLength that can increase the meaximum size. The post says you can configure this setting in Web.config in the BasicHttpBinding section. You can then specify that BasicHttpBinding in an endpoint section. But since we declare the webservice using the WebService attribute in the code-behind file, we do not have an endpoint section.
Is there a way to specify an endpoint using a declarative attribute? Alternatively, is it possible to switch from attribute to web.config mode without breaking existing clients? Am I confusing WCF and its predecessor here?
View 1 Replies
Sep 3, 2010
I am very new to WCF, I have read a lot and seen several presentations about it. I can get the basicHttp endpoint to work on my server but when i wanted to use https, I found that that endpoint binding doesnt work. I think through my research that the wsHttp binding is what i need. I can get the client to work but the service gives me a few different errors when I try to call the ssl endpoint.
Currently i get the following error:
The requested service, 'https://devwcftestsite.crata.ucf.edu/services/Person.svc/Person' could not be activated. See the server's diagnostic trace logs for more information.
Below I have included the web.config for my service project which is hosted at:https://devwcftestsite.crata.ucf.edu/services the service is called:Person.svc
[Code]....
View 2 Replies
Aug 31, 2010
i need to be able to expose information to a page, and I need to write the information in xml on my webserver which will be dynamically created from the database.
I need to use json to pass the data from the screen back to the server two way communication xms back and forth. Is it actually any good using a wcf endpoint to serve the json back to the page and use query with wcf? Is this possible?
Or is it easier to use standard pages .aspx and just do a call to a url and get the json with jquery....
We will probably want to send this information to other locations at some point in the future too....
View 1 Replies
Jul 22, 2010
I have a WCF service hosted on win 2008 server. I'm using WAS to expose a named pipe endpoint on the service and have a client website that consumes the service. When i hit the website from a remote machine i get the following error:The pipe name could not be obtained for the pipe URI: Access is denied. (5, 0x5)Now if i hit the website ON THE SERVER it's being hosted from, using localhost in the url, it works fine. Clearly there is something i don't understand about what the named pipe endpoint is looking for. I tried running a trace from my service, but there is no output because the call doesn't even get to the service.
View 1 Replies
Nov 22, 2010
Is it possible to call (Post to) a Method in a ASPX (Code behind) page via HTTP endpoint in Sql server 2008/2005.
View 1 Replies
Mar 28, 2011
i am trying to call a webmethod from a webservice within a webpart-project and just cant instanciate the class within my webservice. CongressDataExternalSoapClient wsSAP = new CongressDataExternalSoapClient(); at this line i get the following error message: Could not find default endpoint element that references contract 'com.miltenyibiotec.webservice.congress.CongressDataExternalSoap' in the ServiceModel client configuration section. This might be because no configuration file was found for your application...
attention should be paid to "SoapClient" at the end of my Class-Name: "CongressDataExternal". VS cannot find the Web-Class CongressDataExternal. in other ASP.NET-Projects, its possible... but not here!!! so the only class i can see is the CongressDataExternalSoapClient. i can also see the interfaces CongressDataExternalSoap and CongressDataExternalSoapChannel. i have already added the needed entries to the webconfig:
<applicationSettings>
<Miltenyi.Complaints.Sharepoint.Properties.Settings>
<setting name="Miltenyi_Complaints_SharePoint_com_miltenyibiotec_webservice_congress_CongressDataExternal" serializeAs="String">
<value>http://webservice.miltenyibiotec.com/CongressDataExternal.asmx</value>
</setting>
</Miltenyi.Complaints.Sharepoint.Properties.Settings>
</applicationSettings>
...
<configSections>
<sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
<section name="Miltenyi.Complaints.Sharepoint.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
...
</configSections>
Miltenyi.Complaints.Sharepoint is the namespace of my sharepoint webpart project. and this entry is in my settings: Name: Miltenyi_Complaints_SharePoint_com_miltenyibiotec_webservice_congress_CongressDataExternal
Type: Webservice URL Scope: App Value: URL to my webservice... what am i doing wrong here?
View 3 Replies
Aug 10, 2010
How I provide Security In wcf . I have Cleared All the binding,Endpoint,Contract Concepts.
View 4 Replies
Nov 15, 2010
I'm having error:
The pipe endpoint 'net.pipe://127.0.0.1/TestService.svc' could not be found on your local machine.
I have 2 web applications deployed in IIS7:
1st - host(application hosts WCF service TestService.svc, 2nd application should be able to acces this service)
2nd - client(application should use service hosted in 1st application)
I have configured net.pipe binding.
Here web.config files:
1st(Host)
[Code]....
2nd(client)
[Code]....
I've already done with adding net.pipe biding for host application. net.pipe protocol also enabled for the host application.
I can see the service page when I'm opening http://127.0.0.1/TestService.svc.
What am I doing wrong? Why do I receive this error?
<system.serviceModel>
View 1 Replies
Apr 15, 2010
I have managed to expose the MEX endpoint of my WCF service and I can access it with the address like [URL] (example) and get the WDSL. So no problem there.
However, my WCF test page shows the address wrongly by using the server's name instead of the DNS name. And if I click on the link on the test page it won't work (can't get WSDL).
The WCF test page looks like this:
MyService Service
You have created a service.
To test this service, you will need to create a client and use it to call the service.
[URL]
The WCF service is hosted in IIS6. I would like to have a test page with the correct WSDL address so users can see the WSDL quickly in the browser just by clicking on the WSDL address.
In short: How can I change the MyServerName to inter.mycompany.com on the WCF test page? Can this be specified somewhere in the Web.config?
View 3 Replies
