Adding ADODB Reference In VS2008?
Jul 23, 2010
I need to be able to add a reference to ADODB in my code to access that particular COM object's result.
I have tried to add the adodb reference from the properties page of my site, but whenever I try to run the site after adding it I get this:
[code]....
To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
END MESSAGE
Why would this be? I've not encountered this before when adding the adodb reference. The source of the adodb reference is:
c:Program FilesMicrosoft.NETPrimary Interop Assembliesadodb.dll
The file is indeed in that directory.
View 3 Replies
Similar Messages:
Jan 12, 2010
I have a Web service which, when updated on one computer with VS2008 works perfectly fine, but on another computer does not. The critical difference is the contents of the auto-generated Reference.cs.
In the correctly functioning environment, the methods have fully qualified class names, refering to classes in a class library. However, in the problem environment, the class names are unqualified and partial classes are declared near the end of the file. E.g.
[code]....
The code is under source control. Checking out to the working environment works straight away, checking out to the problem environment will only work if the reference.cs is manually edited to be like the working environments. Transferring the project manually from problem environment to the working one only requires an "Update Web Reference" to be performed to allow compilation. Both Reference.cs files claim to be auto-generated by the same tool version. The settings from the good environment have been exported to the other. No success so far...
View 1 Replies
Jan 7, 2010
When you use ASP.NET web site (instead of web application model) and add reference to an assembly from local folder, Visual Studio, it seems, understands that this local assembly is also in GAC and so does NOT copy this assembly to bin folder (as it does with non-GAC assemblies), but simply adds new record in web.config file.
Why such a behaviour? Is it possible to force copy to bin folder (I need this since .dll is not on target environment)? I can add assembly to bin folder as file and it will work, but in this case bin folder contents will be in source control, which is not good.
View 3 Replies
Feb 28, 2011
I have a vs2008 Website project(it was converted from vs2005), when i right click the Website node in the solution and open the property page, i select the references link, then click add reference to Oracle.DataAccess.dll(11g, 64bits), Version=2.112.2.0 in the website BIN directory, it doesn't work, i don't see the Oracle.DataAccess.dll is added, Can you give me any advice why the website project can not add the Oracle.DataAccess.dll ? And I can add rOracle.DataAccess.dll to my other Web Application project, what difference between Website project and Web applicatoin project caused the issue? Since i can not add the Oracle.DataAccess.dll , when i compile, it gave the error:
Could not load file or assembly 'Oracle.DataAccess, Version=2.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. An attempt was made to load a program with an incorrect format.
View 4 Replies
Mar 3, 2011
I have developed the WCF service as follows.
1) Service Contracts in a project
2) Data Contracts in a project
3) Finally adding the reference of service contract project in a Hosting project (Console Application) with complete configurations.
I am adding one more windows app project as a client.When i am trying to add the service reference using the address "http://localhost:8000/Tasks", VS 2008 displays the below error.
There was an error downloading 'http://localhost:8000/Tasks'.
Unable to connect to the remote server
No connection could be made because the target machine actively refused it 127.0.0.1:8000
Metadata contains a reference that cannot be resolved: 'http://localhost:8000/Tasks'.
Could not connect to http://localhost:8000/Tasks. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:8000.
Unable to connect to the remote server
No connection could be made because the target machine actively refused it 127.0.0.1:8000
If the service is defined in the current solution, try building the solution and adding the service reference again.
View 3 Replies
Jul 8, 2010
I have created a VB DLL by selecting File - New - Project and then Class Library
I added a "Properties" region and a "Function" region with some simple properties and one simple function. Compiled it and used it in another app with no errors.
At that point the only references in the project were the default references when creating the new project.
I then created a function that will take a file as a param and get the physical path and add the 2 together. In the function I use the "Request.PhysicalPath" method of the System.Web.UI.UserControl.
I then added areference to the System.Web DLL in my project.
PROBLEM IS I get an error on "Request" that says "Name Request is not declared"
So I googled the error which I found a thread that said to "just use HttpContext.Current.Request.Form" because "by default all websites developed in Visual Studio 2005 is Inherited from System.Web.UI.Page and Class files won't that's the resion we have to add System.Web.UI.Page namespace in the class file"
However when I added the "HttpContext.Current.form." before my "Request.PhysicalPath" I get the same error on "HttpContext".
What Am I doing wrong?
System.Web.UI.UserControl
View 2 Replies
Oct 4, 2010
I'm new to .net
I've following line in my code:
using Microsoft.ServiceModel.Web;
And it works fine as long as I add the namespace reference to microsoft assembly dLL System.ServiceModel.
The moment I copy the code on other machine, I need to redo everything. Is there any way so that I don't need to add this reference again & again?
View 13 Replies
Apr 7, 2010
We have a web site that sits on a DotNetNuke platform and all of our coded modules are written in VB.Net for consistency. However, we have been sent a web page that works as a link and it is written in C# and references a cs file in its App_Code folder. If we try and load this into our website we get an error saying that it is not written in VB we then tried converting the homepage to VB but the reference folder is very complex and written in C#. Can we load the reference file even though it is C# and reference it using VB code. The current all is OurRemService RemService = New OurRemService(); where OurRemService is a file in the App_Code folder in the web page folder. The only other way around this is for us to set it up in IIS as a virtual directory and reference it directly but we would prefer to integrate it into our website.
View 1 Replies
Oct 17, 2010
Since a Web Site doesn't have a project file or a bin folder,
how will a Web Site identify of what are all the dlls to be used.
And if i am adding a third party dll to my web site, and i need to
add this web site folder to a source control, how should i include
this third party dll in the source control?
View 1 Replies
Jul 7, 2010
Before using any class in your website project/page we have to add it's assembly reference to our project. Right?
Now, when I am using SmtpClient class from System.Net assembly after adding the System.Net.Mail namespace in namespace node of application's web.config file but without adding assembly reference to the project it still accepting and running the code. Why?
I enquired the machine's web.config file located at C:WINDOWSMicrosoft.NETFrameworkv2.0.50727CONFIG but didnt find any assembly reference for System.Net.
how it is working and where the assembly reference has been added and how?
View 4 Replies
Feb 2, 2012
I have a number of .Net web sites built in VS2010 using Framework 4.0that reference a web service to send emails.
My most recent site I created as a web application as opposed to a web site. In the Solution Explorer you can add a 'Service Reference' and, if you click the Advanced button you can then add a reference to a web service.
I did that and now the (web application) site won't build - it says it cannot load the Ajax dll. If I remove the reference to the web service, the site builds okay - if I add the reference back in, the site will not build.
Do I need to abandon the idea of using a 'Web Application' and turn it into a 'Web Site'?
View 9 Replies
Dec 12, 2010
I gather from what I have read that the VB6 adodb.recordset is not the best way to work with database tables in VB NET
I have a program created in VB6 that I would like to upgrade or re-write in VB NET
What I am finding difficult to understand or find is the answer to what I use in place of the VB6 adodb.recordset
I have found the code to make DATASET and OleDbDataAdapter and can open an Access or SQL table
But what I do not find or follow is how you move through the rows of a table
With the adodb.recordset you could Do While Not EOF and MoveNext
What is the equivalent to that in VB NET without using adodb.recordset?
View 4 Replies
Apr 13, 2010
1. Is there a reason why someone would want to add a reference to an assembly (e.g. System.Drawing) but not add the Using statement? Seems that if you add a reference, you should add the Using statement automatically, but maybe not always?
2. Correct me if I'm wrong, the only benefit of adding a "Using" statement at the top of your file, is to bring into scope an assembly and not have to fully type the class name? So if I have a Using System.Drawing, I can type in
string = Color.Tomato.ToString(); instead of string = System.Drawing.Color.Tomato.ToString();
View 3 Replies
Aug 25, 2010
I am getting this error while loading(adding) it into service References (web client)
The type 'WcfTrial2.Calculation', provided as the Service attribute value in the ServiceHost directive could not be found.
How to resolve it?
View 1 Replies
Mar 10, 2011
I have four tables test1, test2, test3, test4
they dont have any primary keys.
I have a patient entry table, which has patientID as primary key. if I want to retrieve tests information about a particular test then I have to add a pid as foreign key??
do i have to add a test_ID kinda field in all four tests tables????
how to do this in sql server management studio.
View 7 Replies
Feb 7, 2010
At my campus whenever i open my browser to surf the internet, it requires username and password, e.g IE shows a dialog box requiring uid and pwd then it allows to surf the internet. In short i am behind an authenticated proxy server.I am using vs2008 and trying to add web/service reference to my c# desktop application or asp.net web applicationwhenever i try to add reference it does not show any dialog box(for uid n pwd) and give an error as407 proxy authentication...i have googled at a lot, tried two KB articles but cannot find any solution
View 1 Replies
May 18, 2010
just added reference to jquery minified and block ui on my page through scriptmanagerproxy and it throws error on page load.
<asp1:ScriptManagerProxy ID="ScriptManagerProxy1" runat="server">
<Scripts>
asp:ScriptReference Path="~/script/jquery-1.2.6.min.js" />
<asp:ScriptReference Path="~/script/jquery.blockUI.js" />
<asp:ScriptReference Path="~/script/Default.js" />
</Scripts>
</asp1:ScriptManagerProxy>
View 10 Replies
Oct 20, 2010
I added a service reference via the add service reference method. I can see all of its services in the intellisense but when I run the project and it executes the line where I instantiate the service : MyProjectName.ServiceReferenceName.IServiceReferenceClient
client = new MyProjectName.ServiceReferenceName.ServiceReferenceClient;it throws this error:Could not find default endpoint element that references contract 'ServiceReferenceName.IServiceReferenceClient' in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element.
View 2 Replies
Feb 20, 2010
I'm adding a reference to a funciones.dll file using
clr.AddReferenceToFileAndPath() because I couldnt get it to work other way with this file and it succesfully does it. The file is named funciones.dll and it's in the bin folder. But when I do
from funciones import *
I get "no module named funciones"
since the funciones.dll file it's a funciones.py file compiled, shouldnt the module name only be named funciones and no any other name? isnt the name the problem and it's another? I dont know what other info could be relevant here but if there is any let me know
View 2 Replies
Apr 1, 2011
I have developed an asp.net web service and deployed it Win 2003 server on IIS 6. I tried to access it from my asp.net application which is in developer pc, i'm getting a dialog-box "Discovery Credential for Proxy Server"... which asks for a user and password.
Even when I provided right credentials it is not accepting. May be this is because of firewall. How can I get rid of this.
View 1 Replies
Sep 24, 2010
There is a C#.net libraray project whose dll name is customer.dll. It has a class name customer with a function name show(). I want to call this function from another project but dont want to add reference to the caller project. Can this be done? Is there any C#.net class that can acheive this?
View 1 Replies
Jul 8, 2010
I am adding a reference of class library in web service in VS2008 and it is not copying the .config file from class library to web service. I have checked the property "Copy to output directory" of .config file and its value is "Copy Always".
View 3 Replies
Sep 24, 2010
I am a bit new to ASP.Net Ajax and as such new to Ajax itself. I have a site which uses ASP.Net Ajax. It used the version AjaxControlToolkit version 3.0.30512.0. I have now changed it to version 3.5.40412.2 by deleting the old reference and adding a reference to the latest one . I build the soultion and everything appears fine witjhout any errors. But the site fails to load showing a yellow page with the message AjaxControlToolkit Version="3.5.40412.2" missing reference to 'AjaxControlToolkit.ExtenderBase.Base Scripts.js.BaseScripts.js'. What does this mean ?
View 2 Replies
Feb 19, 2010
I have a c# v3.5 framework site that I am doing some maintenance on. I wish to use Automatic Properties but whenever I try to add one, the compiler fails [as below]. I have added the System.Core.dll (and it is in the web.config ok) but still no joy.
Error 6 'XXX.Archive.TypeOfArchive.get' must declare a body because it is not marked abstract or extern
View 2 Replies
Jul 21, 2010
When appending parameters to an ADODB.Command should the parameters add to the command text. When I get to the point where it sends to the database the command text of the adodb.command is "{ call PKG_WORKPLAN.ADD_PROJECT(?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) }"
I then get a ORA-06502: PL/SQL: numeric or value error: character to number conversion error ORA-06512: at line 1 error. I think i may be getting it from the question mark.
Also is there any way to what sql is inserted if that isn't it.
View 3 Replies
