I bind the GridView to a List<T> filled with custom 'Unit' Classes. Each Unit consists of several properties to fill the usercontrol. (The user control holds a table, and some labels and textboxes).How can I achieve this? Is there a simple way to bind each usercontrol to the appropriate Unit?By the way, this is my way to mimic a "dynamic" behavior of multiple usercontrols on a page. If there's a more simple way, I would like to know how!
i'm opening a new window and passing on to it variables in a querystring, the values are loaded into a function that is filling my dataset and then filling my Gridview. after i press the button field in my grid to delete an item, the databind doesn't show the updated grid but remains the same. i've noticed that if i navigate back and refresh i see it correctly. in FF btw no problem.
I reference a user control in my ListView in this manner:
[Code]....
The problem is that the #Bind command doesn't update the database, but it does so when I paste the code directly into the aspx page (in other words, without the user control involved).
i am getting following error on gridview.databind() Unable to evaluate expression because the code is optimized or a native frame is on top of the call stack , ThreadAbortException,it was working fine and suddenly getting error, i don't what's problem is?
am having trouble figuring this one out. Am using stored procedure and using databind for the gridview . i got the codes off other sites. I'm guessing its the code that i've underlined, how or what do i use as the datasource for the sorting event. I used the Session for the paging event and that works but not for sorting.
I'm working on a project where I have to create a page that displays the "health" of a system. I run a query and display the results in a gridview with a red or green icon next to it. This works fine when the page is first loaded. My problem is that I have a thread that runs a query every 30 minutes and rebinds the gridview but the gridview never refreshes even though the data has changed. How do I get the gridview to display the new results? The databound event never fires a second time even though I can clearly see that I have received new data. I assume I am missing something simple but I just don't know what. What am I doing wrong?
So I have a GridView and several events that can be triggered (such as filtering and inserting a new record) to manipulate the GridView. I want to make sure that I'm not calling DataBind on Page_Load, especially since I might have to call it again when certain events fire. Is there a way I can make it so I only have to call DataBind once on the GridView after Page_Load and anything else has fired? Like some event that will absolutely fire last where I can put my DataBind?
The reason I need to do this is because the DataSource for the GridView is set programmatically from a DataView when the page is loaded, so DataBind needs to run every time. Just, hopefully, not multiple times each time...
I have a gridview positioning issue that may have been answered elsewhere, but I couldn't seem to find a similar post...
I have a webforms app containing a paged gridview (e.g., 200 records - 50 rows and 4 pages).
When the user clicks on a button in a specific row, another web page is launched to process that button click. When the user closes that page to return to the main gridview, the databind event is rerun and the page redisplays the gridview starting at the top. However, I want to have the previous position maintained (like an html bookmark), so that the grid will automatically be scrolled to the the previously clicked gridview page and item.
Setting attributes such as "MaintainScrollPositionOnPostback" do nothing in this case.
I am have a page with a couple of dropdowns which serve as criteria for a select SPROC. Once a selection is made in a drop down a panel is shown which contains gridview whose rows have been returned by the select SPROC.If you close the panel and change the drop down selection and then redsplay your panel the data from your prior selection is still displayed in the gridview, unless you page to the next group of records.
Getting the following sql timeout on a page System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
GridView1.DataBind();
While I know I need to review the actual Stored Procedure used, can someone point me to a quick fix to increase the timeout on the databind.
I have spent most of my time writing ASP.Net web pages, using VS 2005. I am now developing some client function for Windows, so I'm relatively less expert in VB.In my Windows program I have defined a DataGridView and linked this to a data table (within a tableadaptor). Now I want to populate it: on a web page's code-behind I would write Gridview.databind(). What is the equivalent with a DataGridView.
I have a drop down menu that is populated on page load. Below that, I have a gridview that has a select parameter based on that drop down menu's value. I can't get the gridview to populate with data based on the drop down. If I fill in the parameter with a constant, the data pulls fine, but when I switch the parameter to a form parameter, it won't pull.
I am using a dataset for the first time and so far it is going quite well. The one thing that I have not found in tutorials though is how to add a select command to the gridview when i do gridview.databind()
The gridview is just a simple click and add at this point and my code looks like this:
I am new to Entity Framework and working my way through it little by little. I think I have it figured out on how to get data into and out of 1 table at a time now the challenge is 2 tables into a gridview. I have a user table that has a list of threads that a user can mark to track. Easy enough. Assign the userid number & threadid to a table with a push button while the user is logged in and viewing any of the posts that are on that thread. The new challange is to get only the posts that the user has marked to track. SQL easy. Entity not sure what to do.
If I make a view or stored procedure and add it to the database that would be an extra step. To join the 2 tables as in sql Select posts from posts where track.userid = @userid join track on post.userid=track.userid Seems Entity was made to avoid this type of thing. Than once the data is gathered I need to bind it to a gridview()
I have tried several ways but just cannot figure our how to populate some formviews with the data I have brought up in a gridview.
Here is my code so far. I just showing the code behind because my gridview and forms are not a problem. Where I am stuck is at the GridView1_SelectedIndexChanged at the bottom of the code.
using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Web; using System.Web.UI;
I have a custom user control UserProfileLink on which I have two basic string properties, UID and UserFullName which I would like to use in a template column in a DataGrid like this:
I get an error saying "The server tag is not well formed" which leads me to believe this type of binding isn't possible. Is there a way to do this, or is it impossible?
Before I get to the question, let me give a bit of background. I'm trying to develop a custom caching mechanism that I can apply to custom built user controls. (Please be aware that I know that there are some built in caching mechanism in .NET) Depending on certain flags set declaratively in the mark-up the control should load a cached version of its previously rendered content or execute normally (and if certain flags are set it should generate a cache of its content for next time it loads). I would like to be able to pass certain flags declaratively in the mark-up and being able to check their value at Page Init and, depending on the flag value, determine whether the control should load a cached version or not.
The problem that I'm facing is that as far as I'm aware I can only get the value of the properties declaratively assigned in the mark-up if I called the DataBind(). However I'm faced with two problems: Firstly calling this.DataBind() from within MyUC will trigger the binding of all its child controls which would defeat the purpose of the cache; also all user controls have been built so that they will not call DataBind() before the LoadComplete event has fired, so to make sure that the parent controls they live in has done its initialisation and has computed the properties that are declaratively passed to the child user control (ie PropA, PropB, PropC).And now the question: is there a way to bind the CacheProp property so to retrieve its value without data binding all other properties and without triggering the data binding of all its child controls?
Is there an easy way to select a specific user that is already logged in and bind all the users info to a detailsview for edit and saving back to the tables?The tabels were generated in AWAT of VS 2010
I have a gridview in web user control and when i try to bind the datasource during the Page load process, an exception occurs. The datatable is retreived successfully without errors( I could view the data inside using the debugger ) but once gridview.databind() process takes place, exception occur. Could anyone tell me what happens ? This is really weird to me coz if such gridview is placed inside a content page instead of a webUser Control, no exception or error will occur.
I have a page with a gridview control that shows files that have been uploaded to our site. The name of the uploaded files, who uploaded them, and if they have been downloaded, etc are stored in a table. The gridview is bound to the table through a sqlDataSource control. I have a button column in the gridview that downloads the file associated with a row when the button is clicked. All that works well. I have a check box column that shows checked if a file has been downloaded. When the download button is pressed.
the file downloads and then a short routine is run to update the downloaded field in the uploaded files table to set the downloaded field to true. This is done through a command string. All this works. Here is the question. After the update is run I do a databind on the gridview to update it. The databind is run in the PageLoad event is the page is a postback. This does not cause the current row to show downloaded =true (checked). If I refresh the page in the browser then it displays correctly.
