C# - Forcing SSL (https) On A Page By Page Basis?

Sep 9, 2010

How can I set up my page load event in my code behind to redirect to an url that has an https prefix? I would need it to work with urls that have query strings attached too.It's one thing to construct a link that goes straight to the https page, but I don't want the user to be able to manually change it to an http page.Also I don't want to do it with javascript because it might be turned off.

View 4 Replies


Similar Messages:

Forcing Https And Avoid Duplicate Urls Using IIS7 Url Rewrite Module

Feb 16, 2011

I need to force every request to https://www.mysite.com (always with https and www)

The site is hosted in GoDaddy and I need to do it via IIS7 URL Rewrite Module.

I've been able to do the HTTPS redirect with the following code:

<system.webServer>
<rewrite>
<rules>
<rule name="Canonical Host Name" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTP_HOST}" pattern="^mysite.com$" />
</conditions>
<action type="Redirect" url="https://www.mysite.com/{R:1}" redirectType="Permanent" />
</rule>
</rules>
</rewrite>
</system.webServer>

Test cases

http://mysite.com -> https://www.mysite.com OK
http://www.mysite.com -> https://www.mysite.com NOT WORKING

I guess the condition is not being satisfied when I enter www.mysite.com in the browser, so there's no redirect and the page serves as HTTP instead of HTTPS.

I think I just need to modify the condition pattern, but I have almost nothing regex knowledge and I need this asap.

View 1 Replies

Passing Value To Another Page Using Https / Cannot Read The Control Values From Default.aspx Page

May 30, 2010

I need to force SSL when going to the final checkout page (for example from default.aspx to checkout.aspx).

I need to pass variables to this check out page and tried to use server.transfer(https://www.mydomain.com/checkout.aspx). I then use previous page .Fincontrol to read text box and label name to this check out page. If I only do the server.transfer("~/checkout.aspx") then my I can read all vakues of my controls from the passing default.aspx page.

But when I force https:// then I cannot read the control values from default.aspx page.

Please give me some tips on how to get control values to the https:// destination page or if you have another tips on how to do it the right way, please let me know.

View 8 Replies

HTTPS ASPX Page Redirect To HTML Page Logs User Out - As If Session Lost?

Sep 10, 2010

Building asp.C# shopping app that is using a hosted payment page to process payments (using posting of data to a hosted payment page). SSL certificate is signed and installed.

Flow:

Prelim) (HTTPS) Users authenticate using asp Login control

1) Users add items to cart.

2) (HTTPS)Users go to checkout page.

3) Users finalize their order, then click pay now after agreeing to T&C.

4) Server gets cart data (from MSSQL2005) and sets a transaction cookie (expiry set to 20 mins).

5) (HTTPS) Server Response.Redirects to an html page (in the same folder as the login protected pages).

6) Html page reads transaction cookie data and generates form fields.

7) (HTTPS) Html page posts data to hosted payment page (php).

8) User enters payment info and clicks pay now.

9) (HTTPS) hosted payment page posts info back to a .aspx page that checks if payment OK.

10a) If payment !OK, redirects to a declined page.

10b) (HTTPS) If payment OK, sets a verification cookie (expiry set to 20 mins). Then redirects to another html page.

11) Html page reads cookie data and generates form fields.

12) (HTTPS) Html page posts data to hosted verification page (php).

13) Verification page verifies (of course), if transaction ok.

14) (HTTPS) verification page posts data to a .aspx page that checks if verification OK.

15) If verification OK, process orders and do receipt stuff.

Issue:

This control flow was tested on an unsigned dev environment. SSL was being enforced, if needed on the unsigned SSL certificate. So we'd get prompts that certificate may be bad, but the control flow worked seamlessly.

However, now live with a signed SSL certificate, going from step 5 to 6, we are encountering a situation where some users (not duplicated every time, but verified that it does occur) when they click pay now and are redirected to the html page, they are forced back to the ~/login.aspx page (as if they were logged out).

Things to note:

a) The session did not time out.

b) The browsers have cookies and javascript enabled.

c) I can process the entire flow seamlessly on the same machine with other accounts, and occasionally, the same account.

So, basically, I'm stumped... Is this a viewstate error? A login control bug that won't let me redirect to an html page because it is now using a real SSL? Anyone have any experience with this kind of deal? I'm at a loss for solutions at this point.

View 1 Replies

How To Transfer Session From HTTP Page To HTTPS Page

Sep 16, 2010

How we transfer my session from http page to https page.

View 3 Replies

JQuery - Forcing Page To Halt Until Data Is Finished Loading

Oct 25, 2010

I might be wrong about what is actually happening here but i have 3 Html.dropdownlists. And im using jquery to handle filtering which does actually work. However, there is some odd behaviour which i think might be because data isnt finished loading before the next function is called. For instance: Some background. Company: Owns several field offices Field Office: Owns several facilties So logically, when you change company, field offices should change, which then changes facilities.

$(function () {
$(document).ready(function () {
var cid = $("#CompanyId").val();
$.post("/ManifestSearch/GetFilteredFieldOffices", { id: cid }, function (data) {
$("#FieldOfficeId").loadSelect(data);
});
var fid = $("#FieldOfficeId").val();
$.post("/ManifestSearch/GetFilteredFacilities", { id: fid }, function (data) {
$("#FacilityId").loadSelect(data);
});
});
});
Now, when the page loads, everything looks fine. All the dropdownlists have the correct data.
When i change company, this calls.
$(function () {
$('#CompanyId').change(function () {
var cid = $(this).val();
$.post("/ManifestSearch/GetFilteredFieldOffices", { id: cid }, function (data) {
$("#FieldOfficeId").loadSelect(data);
});
var fid = $("#FieldOfficeId").val();
$.post("/ManifestSearch/GetFilteredFacilities", { id: fid }, function (data) {
$("#FacilityId").loadSelect(data);
});
});
});

This changes the field offices to the correct list, however facilities changes to whatever field offices was set to before the company change occured. I dont know enough about jquery to figure out exactly what is going on, but my instinct tells me that the two posts are happening at the same time, and the second post happens before the first one is finished.

View 1 Replies

State Management :: Session Timeout On Page Basis?

Dec 14, 2010

How can I remove or Dispose a session once user navigate from one page to other. I just want to use a session which should expire when user navigate to other page..its same like view state..we don't get viewstate information on page to page. why session: i need to keep one value on page constant on page refresh where as Viewstate will be reset to null on page refresh...and i just don't want to use that session once user navigate to other pages.. where i need to plcae the session dispose in page events or methods?..or is there any way to keep viewstate on page refresh?

View 9 Replies

Security :: Is There A Way To Know Beforehand If A Given Page Will Be Served In HTTPS

May 31, 2010

Is there a way to know beforehand if a given page will be served in HTTPS. To be clear I don't want to know if thecurrent page is using HTTPS or not.

View 3 Replies

Redirect To Https Login Page

Jun 9, 2010

I have a site that has a mix of http and https pages. Under the root of the site, one folder has all the http pages and another has all the https pages. Login is over https and sends the user to the other pages. When a session expires the forms authentication redirects to the Login page but the browser uses http and the user gets a 403 error. Is there any way to override the session timeout to send it to https?

View 1 Replies

Web Forms :: How To Develop HTTPs Page

May 15, 2012

How to develop a https page in asp.net ....

View 1 Replies

Configuration :: How To Host A Same Page With Same Content On HTTP As Well As HTTPS

Jul 30, 2010

I am creating a website with password-protected pages in it.

I have two type of customer: 1. Free 2. Paid

For paid customers, pages would be rendered over HTTPS whereas for free customer, pages will be rendered over HTTP. However, pages for both types of users would be same (while populating specific information for each user.)

note, the URL for the two users should be same except HTTP/HTTPS part.

I am new to HTTPS and want to know how to achieve this.

I am wondering how to implement it?

View 3 Replies

Aspx Page Giving 404 On HTTPS While Working Fine On HTTP

Mar 17, 2011

Other pages (aspx) are working fine on both http/https, only ashx gives response 404 on https, I used firefox firebug to investigate it.

I have two same virtual directory on IIS, one is mapped for https where this ashx is not working.

I guess some kind of mapping is missing for https on server, not sure where this kind of mapping is stored?

View 1 Replies

Web Forms :: Checking HTTPS On Page Load And Executing Condition?

Oct 13, 2010

In Global I have the following code that redirects the page to use HTTPS. I also have a SPROC that adds a record when a user visits a page. When a user visits a page, the SPROC is adding a record for the HTTP and then another record using the HTTPS. I'm not sure how to handle just adding one record. Is there something to add to the SPROC that will delete one of the records or should I do a code behind on an aspx page that executes the SPROC "IF" the page starts with HTTPS? HOw would I set up the condition to check for the HTTPS?

[Code]....

View 1 Replies

AJAX :: HTTPS 413: The Page Was Not Displayed Because The Request Entity Is Too Large?

Jul 2, 2010

I am facing the issue "The page was not displayed because the request entity is too large."I am using ASP.Net 3.5, Sql server2008, IIS 7.5 and OS Windows 2008.I am finding the issue on following scenario:1. The error only shows up if the page is viewed as HTTPS (SSL).2. After login in the application if user waits for 1 min or more before doing a postback.Page size is about 200kb. It is running quite fine on Http.

View 5 Replies

Security :: Pages Won't Change From HTTPS To HTTP Once Leaving Secured Page?

Jul 16, 2010

I'm pretty new at configuring IIS and working with SSL. I've been having difficulty with switching from the HTTPs protocol to the HTTP protocol. I had set a small part of our website to the HTTPS protocol since it has an SSL certificate for online commmerce.

When users go through that part of the site the HTPPS protocol is set and runs fine, but when they try to leave by, say, clicking on a link to another part of the site (after they have visited the secured portion of the site) the HTTPS stays in the url. Is there something I'm doing wrong?

This is how the HTTPS is set on the site: this code is placed in an sslredirect.asp page located in a "SSL" folder:

<%
Response.Buffer = True
If (Request.ServerVariables("HTTPS") = "off") Then
sQ = Request.ServerVariables("QUERY_STRING")
sURL = "https" & Right(sQ, (Len(sQ)-8))
sURL = Replace(sURL, ":80", "")
Response.redirect(sURL)
End if
%>

View 1 Replies

Forms Data Controls :: Create A Secured Page Which Uses The Https Method?

Aug 30, 2010

know "How to create a secured ASP.Net page which uses the https method".Note:

View 2 Replies

C# - Unitpngfix Javascript:Void(0) Error Not Allowing To Show Page With Https (securely)?

Oct 28, 2010

I have a problem with the below one. This Javascript:void(0) is stopping me from showing the page securely with https. What is it actually? I have no idea about javascript.

var clear="js/clear.gif"; //path to clear.gif

document.write('<script type="text/javascript" id="ct" defer="defer" src="javascript:void(0)"></script>')

This file has the name js/unitpngfix.js*...i tried to see if it is being used anywhere. Yes, it is being used and all the pages that use this will not be shown as https. In the Master page, it was used like this

View 1 Replies

HttpHandlers / Modules :: Redirect A Page From Http To Https Using Http Module Begin Request Handler?

Jul 15, 2010

i redirect a page from http to https using http module begin request handler .i am calling webservice using ajax but it is saying webserice not defined .which otherwise works fineits work fine when rediect page in page_load instead .but i need to add function for https to http in every page. i still not know why ajax is not working when i use http module for redirect

View 3 Replies

HTTPS Doesn't Work - Secure And Non Secure Data On Web Page?

Oct 25, 2010

I have a browser compatibilty problem with https? I have SSL installed and is in usage. Until today morning, my https part is working well. From then, Https is shown as https(with slashed in red color) saying the page has some insecure content. I have not changed any code and suddenly i see this problem in chrome. In IE 8, i see the same problem but on every page, it shows me a popup if i should allow to opne secure and non secure or just secure. Firefox has no issues . It shows correct https without any problem. I am fed up with it searching all over. Why is this happenening for me in Chrome and IE 8.

View 3 Replies

Having Common Page Title In Master Page With Each Page Adding Page

Aug 26, 2010

My master page looks like:

<head runat="server">
<title>
<asp:ContentPlaceHolder ID="PageTitlePlaceHolder" runat="server" />
</title>

Content pages look like:

<asp:Content ID="TitleContent1"
ContentPlaceHolderID="PageTitlePlaceHolder" runat="Server">
My Page
</asp:Content>

This works by placing the content page specific title on the page ("My Page" in this example). Now I want to add a global prefix to the title in my master page for the site name. So I want:

<head runat="server">
<title>
Example.com:
<asp:ContentPlaceHolder ID="PageTitlePlaceHolder" runat="server" />
</title>

However, when I do this content pages are still rendered without "Example.com" in the tile, it's like it's ignored.

Why is this happening and how can I achieve this?

View 2 Replies

Page Life Cycle Sequence Between Master Page And Child Page And User Control?

Jun 4, 2010

I want to share a common page load and page init events sequence between Master page and child page and User Control as described below:

Let us have the following components:-

1. TestMaster.master -> It is the master page

2. TestChild.aspx -> It is the Child page

3. TestUserContrl.ascx -> It is the UserControl present within the TestMaster.master page.
[code]...

View 6 Replies

Web Forms :: Accessing Master Page's Body Tag From Aspx Page That Is Not A Content Page

Jan 8, 2011

I am using Master page and Content page combination.But how can i access <body> tag and it's event (onload, onunload) of Master page in .aspx page that is not a content page.

View 12 Replies

Web Forms :: To Get A Normal Html Page Inside The Master Page Instead Of Content Page?

Mar 25, 2010

I have a master page homeMaster.aspx and many content pages. However the situation is I have few .html pages. Now when a user clicks on a link the html page should get loaded.inside the master page. The problem is these are .html and not content page with .aspx.

View 4 Replies

Web Forms :: Treeview Style Doesn't Apply In The Page If That Page Is Using Mater Page

Jun 10, 2010

I've encountered a problem when I put a treeview in a page which is using master page. The treeview style doesn't apply.For example, I set the nodes with different colors in different levels. But the treeview nodes are still displayed in the default color(bule).

The treeview code is :

[Code]....

If I use these code in a page which doesn't use a master page. The nodes are shown in colors.

View 3 Replies

Restricting Certain Pages -- Redirect On Every Page? Or On Master Page By Viewing Current Page In Url?

Feb 6, 2011

Per different user mode, some pages should not be accessible by users unless they have a valid session key.In your opinions -- would it be better to have a list of acceptable pages in the master page, and check if the current page is valid for the current user? Or handle this on every child page?I'm thinking master page, just want to hear what your input would be.

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved