I have a nested GridView that is placed inside a ListView. The GridView renders perfectly fine with all the entities that are bound inside its datasource.
Each record in my gridview has two buttons - 'delete' and 'edit'. The issue that I am having is that the methods wired to each of these buttons never get fired.
I think the reason for this behaviour is because my ListView's data binding happens only on the first page load, and not on every subsequent postback. As a result, when a postback happens, the events of the nested gridview are never wired up again - hence my methods are not getting fired.
Here is what my code [simplified] looks like:
I tried modifying the above code and removing the "!IsPostBack" clause, and the events actually got fired when a button inside the GridView was clicked. However, I do not feel comfortable doing a databind on every postback and think there should be a better solution than that.
I've googled a bit for the exact order of all gridview events relative to and where inbetween page events. The only Microsoft article: [URL] is not very clear. I'm especially interested in the gridview row_command event relative to page events.
I have an ASP.NET web forms site using Master Pages. It is using Unity as my IoC container. I have created an HTTP Module to build up the container using a couple of tutorials i found online. I need the dependency injection to work for User Controls and the only way i was able to get this to work was to hook into the Pages PreInit event as can be seen from the code below.
I also have autoeventwireup set to true on the pages and master page. Can anyone shed any light on why the events are not firing? Is my Unity http module causing this to happen by dropping the event wiring? I can get this to work no problem in a basic example with no IoC involved.
I have a gridview that's inside a .ascx control that's dynamically embedded into another .ascx control, which is then called by a web form. The gridview will initially bind, but when any paging/sorting/command events are then triggered, I can't get any breakpoints inside the events to kick off. Additionally, when I look at the code-behind in the now-blank page, I see the old data sitting there.
what on earth is going on here? For edification, the .ascx page with the control is excerpted.
I've been reading up on the problems with dynamically created controls and how they have been solved. The posts I have come across are creating the controls in a panel or some other open place. I can't seem to get my checkbox to fire the event from inside a gridview. below is the code behind from inside the GridView PreRender event.
..And the Checked Event.. [Code]....
So after all this, nothing happens. I get the postback flash but my command inside the checked event doesn't fire.I tried putting the dynamic creation of the checkbox in Page Load with no effect.. I think because I can't place the checkbox inside the GridView under page load.
I'm sure I'm missing something extremely obvious here, but at this point I can't see it so I need the help.Anyway, I've got a repeater inside of an UpdatePanel. As of right now, I've stripped it down to this, just to try and isolate the problem:
Whether I add the handler during itemdatabound or I add the handler within the repeater itself, it doesn't seem to matter...the event itself doesn't fire. The AutoPostback itself seems to fire, but the event itself doesn't.
through the Sitepoint book "Build Your Own ASP.NET 3.5 Web Site". In chapters 10 and 11 the book covers the DataList and GridView.My project will load data correctly into the list and grid; however, the events are not firing, for example the SelectedIndexChanged event. As far as I can tell no list/grid events are being fired in the code-behind file (the page load event and data binding does occur).There are some similar posts in these forums and on the internet concerning this.
I will go into the background of why i am wanting to do this if necessary but in short. I want to create a WebControl which has a button on it. I provide the most simple of examples to understand why it is not working.
No matter what i try my button event doesnt seem to fire. the code for it is here:
I'm facing a weird issue...My button events are not firing :(I'm using the 3.5 .net framework and I've already tried to run aspnet_regiis -c, clear the browser temp files, use windows integrated authentication, but nothing works...this is the cenario:
- windows server 2003 - app migrated from .net framework 1.1 (which was working fine) to .net framework 3.5 - IE8
I have this strange problem where if I setup IIS to point at a .net 4 webapp none of my events fireSo lets say the site in IIS is "http://www.mysite.com"...any button I click doesnt ever hit a breakpointNow if I add /default.aspx to the end...all the events fire againDefault.aspx is the top default document in IIS
I have been trying to solve this problem for several weeks now and it is getting really frustrating. Basically i have a simple project which includes one master page and one content page. the following code is what is found in the content page
I have a page with 2 Controls, a ListBox and a DropDownList.
In the DropDownList you can select a PLACE.
In the ListBox you can see all DOCUMENTS for the selected PLACE.
If you select a DOCUMENT, the program does a redirect on the selected DOCUMENT.
So, there are an AutoPostBack and an Event (if you select another Item) on both Controls.
The problem is: If I select a PLACE, then I select a DOCUMENT (the pdf document is opened), and then I go back on the page and I want to select another PLACE, the program doesn't select another PLACE, but opens the old DOCUMENT, because there are 2 Events, one to change the PLACE and one to open the DOCUMENTS.
I have a DataGrid which i am using on the page alogn with 4 tabs. Clicking on each tab different datasource is getting bing to the data grid. Now following is problem,
There are 4 tabs of UI I have written code to bind data source to data grid on onclick event of tab (which is linkbutton) However when i am clicking on the tab data gets bind to data grid but item created and item databound event which i have attached to grid on page init() are not firing on the first time. I also have attached page index changed event clicking on which executes item created and item data bound event
What would cause click events to not fire?If I run the Visual Studio debug server everything works fine, but when I run the site off my Windows 7 IIS, buttons just postback without their events firing (breakpoints show Im getting page lifecycle events, but no clicks)
I have one Button (Refresh Button), One ComboBox (containing DEV and UAT as its items) and a GridView on my asp page.
I am filling up my Grid with values from database on the ComboBox's 'TextChanged' event and Buttons's 'Click' event.
First time when page is loaded, there is no information in the grid, but when i choose DEV/UAT from the ComboBox 'TextChanged' event is fired, the grid is filled with the relevant data. That is what i want.
When i click the Refresh Button to refresh the data again, first comboBox's 'TextChanged' event and then 'btn_Click' event is fired.
I want then when a button id pressed only 'Click' event to be fired and not the ComboBox's 'TextChanged' event.
I have a WebUserControl with a Button and some other controls (placeholder for images, labels). On a certain page, a number of these WebUserControls are created (using Me.LoadControl) and added to a PlaceHolder on the page.When the user clicks the button on either of these usercontrols, I want a method on the page to be called. I have been doing this by handling the Button Click event on the usercontrol, and then letting the usercontrol raise another event. I use AddHandler after creating the usercontrol to add an eventhandler method to this custom event. Sounds confusing? Here's a simple example.
The WebUserControl: asp Code: <%@ Control Language="vb" AutoEventWireup="false" CodeBehind="TestControl.ascx.vb" Inherits="CSLimitedEdition.Controls.TestControl" %><asp:Button runat="server" ID="btn" Text="Button" /> vb.net Code: Namespace Controls Public Class TestControl Inherits System.Web.UI.UserControl Public Event ButtonClicked As EventHandler ' Just some property to test with Public Property Number As Integer Protected Sub btn_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btn.Click ' When the button is clicked, raise a ButtonClicked event to handle on the Page RaiseEvent ButtonClicked(Me, e) End Sub End ClassEnd Namespace The Page to place a number of these controls on: asp Code: <%@ Page Title="" Language="vb" AutoEventWireup="false" MasterPageFile="~/Site.Master" CodeBehind="TestPage.aspx.vb" Inherits="CSLimitedEdition.Pages.TestPage" %><asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" runat="server"></asp:Content><asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <p> <asp:Label runat="server" ID="lbl" /> </p> <p> <asp:PlaceHolder runat="server" ID="placeHolder" /> </p> </asp:Content> vb.net Code: Imports CSLimitedEdition.Controls Namespace Pages Public Class TestPage Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load If Not Me.IsPostBack Then Me.AddControls() End If End Sub Private Sub AddControls() For i As Integer = 1 To 5 ' Create the control Dim c As TestControl = DirectCast(Me.LoadControl("~/Controls/TestControl.ascx"), TestControl) ' Set some property for testing and add event handler c.Number = i AddHandler c.ButtonClicked, AddressOf TestControl_ButtonClicked ' Add it to the place holder placeHolder.Controls.Add(c) Next End Sub Private Sub TestControl_ButtonClicked(ByVal sender As Object, ByVal e As EventArgs) ' When a button on a usercontrol is clicked, set the label text to the 'Number' property of that control Dim c As TestControl = DirectCast(sender, TestControl) lbl.Text = c.Number.ToString() End Sub End ClassEnd Namespace
The idea is this:Button is clicked on the TestControl: TestControl.ButtonClicked event is raised. On the TestPage, the bestControl_ButtonClicked method is called The Number property of the calling TestControl is assigned to a label so I can see it. However, it seems that the TestControl_ButtonClicked method is never called. Via debugging I can confirm that the Button Click event, on the TestControl usercontrol, is fired, so that the TestControl.btn_Click method is called. The TestControl.ButtonClicked event is raised.After creating a TestControl, the AddHandler statement is executed. After clicking a button on the page however, nothing happens. The page just posts back, all the buttons are gone (ok, I'm not loading them again in case of a postback), but the label does not get the text.In fact, the ButtonClick handler method (TestPage.TestControl_ButtonClicked) method is never called! What could be causing this? I am sure that I have been using this method a few weeks ago, in this very project, yet suddenly it has stopped working. I thought it might be a one-time thing but with these new TestControl and TestPage the same thing happens. The same thing happens also in a completely new and separate project. I don't get it, this WAS working?