C# - WebException: The Server Committed A Protocol Violation. Section=ResponseStatusLine (call Marketo SOAP API)
Nov 25, 2010
I successfully added the web service reference and tried to call it with this line of code:SuccessGetLead lead = service.getLead(paramsgetlead);
[WebException: The server committed a protocol violation. Section=ResponseStatusLine]
System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) +263
System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) +4
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +172
com.marketo.soap.MktMktowsApiService.getLead(ParamsGetLead paramsGetLead) in c:Usershubert.griningerAppDataLocalTempTemporary ASP.NET Filesdynaweb200782e21235d41bf12aApp_WebReferences.liqikruc.7.cs:206
[code]...
View 1 Replies
Similar Messages:
Aug 19, 2010
After moving application to shared hosting I cannot add service reference to .asmx and WCF services that used to work on dedicated server.The error in adding WCF service reference is:
There was an error downloading 'address ... Service.svc'.
The server committed a protocol violation. Section=ResponseHeader Detail=CR must be followed by LF
Metadata contains a reference that cannot be resolved: 'address ... Service.svc'.
The server committed a protocol violation. Section=ResponseHeader Detail=CR must be followed by LF
The server committed a protocol violation. Section=ResponseHeader Detail=CR must be followed by LF
If the service is defined in the current solution, try building the solution and adding the service reference again.asmx web reference:There was an error downloading 'address ... .asmx'.
The server committed a protocol violation. Section=ResponseHeader Detail=CR must be followed by LF
There was an error downloading 'address ... .asmx/$metadata'.The server committed a
View 3 Replies
Oct 7, 2010
I got an error and do not know how to fix it!
Fiddler has detected a protocol violation in session #2331.
Content-Length mismatch: Response Header claimed 1939 bytes, but server sent 1983 bytes.
View 1 Replies
Jul 1, 2010
ASP.Net 2.0 Web Services automatically create both SOAP 1.1 and SOAP 1.2 bindings. Our web service, however, has SOAP extensions and custom exception handling that make the assumption that only the SOAP 1.1 binding is used (for example, the SOAP extension uses the HTTP SOAPAction header to control behavior).
I am looking to correct the code that makes these assumptions and make it work with either SOAP 1.1 or SOAP 1.2 properly. I am running into a bit of a problem in the generation of elements for our SOAP faults.
Consider the following web method implementation:
[Code]....
The SOAP 1.2 response now has the wrong qualified name for the detail element. It should be <soap:Detail>, but instead is merely <detail>, same as the SOAP 1.1 response.
It seems that the ASP.Net 2.0 framework has done quite a bit to transform a SOAPException into the appropriate form for the SOAP version, but neglected to properly handle the detail element. Additionally, they don't seem to have exposed the correct SOAP 1.2 qualified name for the detail element as was done with the SoapException.DetailElementName property.
So, what is the correct way to add a detail element to a SOAP fault response that works for both SOAP 1.1 and SOAP 1.2? Do I need to detect the SOAP version myself and hard-code the SOAP 1.2 qualified name for the detail element?
View 2 Replies
Mar 10, 2011
I am trying to create a forgot password section within my login section and it doesnt seem to work.
In my forgotpassword.aspx page my code looks like this:
[code]....
According to our records, you have requested that your password be reset. Your new password is: <%Password%>
If you have any questions or trouble logging on contact a site administrator.
No connection could be made because the target machine actively refused it ::1:25
Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it ::1:25
View 2 Replies
Jun 3, 2010
We have an ASP.Net web service the call to which, due to some bad design, often takes more than 20 minutes to return. We have changed every setting that we can think of, but no matter what we do, we always get a timeout after 20 minutes. It happens that this web service is a BizTalk orchestration exposed as a web service, but I do not think that is relevant -- the error is an ASP.Net error.
There must be some setting we can change to increase the timeout to more than 20 minutes, but we've exhausted our knowledge. What setting are we missing? EDIT: Among other setting, we have tried those detailed here: [URL], which includes httpRuntime executionTimeout, sessionState timeout and app pool idle timeout.
View 2 Replies
Apr 4, 2011
I am using a web method of a company's web service.
This web method requires one parameter when calling it:
CompanyOpereations srv = new CompanyOperations();
srv.getCustomerInfo(input);
How can I see my soap request xml when calling this method?
View 2 Replies
Feb 2, 2010
I have a web service/wsdl file that requires client authentication to passed through SOAP headers.
There is not property or method available in web service to set the SOAP headers.
how to call the web service method along with SOAP headers in .NET 2.0
View 7 Replies
Apr 4, 2010
how do i call webservice via httpwebrequest with soap header
[Code].....
but i don;t know where to add AuthSoapHd for username and password.
HttpWebRequest request = (HttpWebRequest)
HttpWebRequest.Create(url);
String xmlString = txtInput.Text;
ASCIIEncoding encoding = new ASCIIEncoding();
[Code]....
View 2 Replies
May 7, 2015
after installing ssl for a website (by host admin)
all of pages are https now,
I need one http page? it is related to programming or iis?
View 1 Replies
Mar 2, 2010
I had this one working a while back i try to upload file to my root folder it works locally but when i try it from my website i get the following error: exception details: system.bet .webexception. unable to connect to the remote server
the code bomb at the following line
requestStream = uploadRequest.GetRequestStream() 'This is where the exception occurs
fileStream = File.Open(localFile, FileMode.Open)
[code]....
View 2 Replies
Jul 12, 2013
with this code website works perfect
<configuration>
<system.web>
<httpHandlers>
</httpHandlers>
</system.web>
</configuration>
but when I add
<add path="ThumbHandler.ashx" verb="*" type="Delshad.WebControls.ThumbHandler,Delshad.ThumbPic"/>
or
<add verb="GET" path="CaptchaImage.axd"
type="MSCaptcha.CaptchaImageHandler, MSCaptcha" />
in httphandlers section when I go in my site it is only a blank page!
before In other two host there wasent problem but this is a new host and I face with this problem.also in local there isn't any problem.
View 1 Replies
Mar 27, 2011
so I've set up the table as described.. (seems to be some directions missing with regards to, is identity? and is Primary Key? and what those values are and should be set to for name, description, and price durring table setup) So, ive tried to set the table up as directed and then go on to click DATA which allows me to fill in the table. I can fill in the table all the way accross but when i reach the end of the first row it says:
INVALID DATA your change could not be committed to the database. after you click OK you can fix the invalid entry or press to cancel your changes.
View 4 Replies
May 3, 2010
i have a method that do bunch of inserts in a table
these inserts done through a transaction (with default isolation level)
meanwhile i need to read some committed records from this table by using another method, i create another transaction for 2th method with a ReadCommitted isolation level but it just fails and return a timeout error and also, the DoTransaction cause the entire table inaccessible, how could i apply a row-level lock ?
[Code]....
View 5 Replies
Nov 27, 2010
In the database one number like a 91-9685748596 and, 2nd number like 9122-9685748596 and another one is 9685748596 .when we are try to formate it using substring function it all are may be9685748596,9685748596,9685748596.Mobile number is assigned as a primary key.so its showing error "Primary key violation".We can not the remove primary key also and there are 50 lack data in our database.
View 6 Replies
Jan 11, 2011
I'm not entirely sure how to explain this, but basically I am trying to use a Silverlight application hosted within an ASP.NET MVC application. I have a basic controller on the MVC side that contains a method which accepts some string parameter and returns an ActionResult (for the purpose of this program, that result is some Json data).
My problem arises when I handle the WebClient.OpenReadCompleted event within the Silverlight control. When the WebClient.OpenReadAsync method is called within this control, it successfully reaches the controller and then reports back to the relevant event handler as expected. However, when it is handled, the event arguments contain an error stating: "The remote server returned an error: NotFound.".
Previously, I have noticed this is caused when some part of my communication URL is incorrect - in this case it is not. From some Googling, I have also noticed that this is a generic error. As such, I'm rather stumped. To make matters more confusing, I use this exact same communication attempt in another part of the program, that retrieves an array of strings, and that works perfectly fine.
see the example code below (due to the nature of this program, I am unable to post the full code).
Silverlight Control
WebClient mClient = new WebClient();
public void RequestData()
{
mClient.OpenReadAsync(new Uri("http://localhost:51234/Home/GetData"));
mClient.OpenReadCompleted += new OpenReadCompletedEventHandler(mClient_OpenReadCompleted);
}
private void mClient_OpenReadCompleted(object sender, OpenReadCompletedEventArgs e)
{
if(!e.Cancelled && e.Error == null) // <-- e.Error here is a WebException
{
var serializer = new DataContractJsonSerializer(typeof(Data));
Data data = (Data)serializer.ReadObject(e.Result);
}
}
MVC Controller - named HomeController and accessed with "Home"
public ActionResult GetData()
{
return Json(new Data(), JsonRequestBehaviour.AllowGet);
}
Note Here, Data contains three members of types; string, string and byte array. For the purpose of serialization, I have exposed all three members through public properties containing both get and set parts. I have also added a public constructor taking no arguments.
UPDATE
I've just tried the same bit of code with different data, and it works fine. I wondered if it was the size of the data (as the first attempt was with very large data), but I don't understand why that would matter if the call managed to hit the controller.
View 1 Replies
Dec 13, 2010
here my code-
private string HttpContent(string url)
{
WebRequest objRequest = System.Net.HttpWebRequest.Create(url);
StreamReader sr = new StreamReader(objRequest.GetResponse().GetResponseStream());
string result = sr.ReadToEnd();
sr.Close();
return result;
}
exception comes in 2nd line in objRequest.GetResponse(). If I open it quick watch window I get:
'objRequest.GetResponse()' threw an exception of type 'System.Net.WebException'
"The remote server returned an error:(404) Not Found."
View 5 Replies
Apr 14, 2010
My system: I have installed Windows 7, VS2010 and .NET40 and ASPAJAXExtSetup.msi I'm getting the error below.
Error Summary. HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid.
View 13 Replies
Nov 28, 2010
how to violation of primary constraints
[Code]....
View 1 Replies
Dec 20, 2010
My company has developed a .NET web service and a client dll that uses that web service. The webservice is hosted on our server over ssl and the cert is provided and signed by GoDaddy. We have some clients in a hosted environment that are getting the following error message from the client dll when it tries to access our web service.
System.Net.WebException The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
Our fix has been to have them open IE on the server, which is a challenge in and of itself for a lot of the hosted services, and go to the WSDL url. IE then prompts them with a security alert dialog. It says the cert date is valid and a valid name matching the name of the page, but was issued by a company you have not chosen to trust. When they click Yes to proceed, the client dll can then succesfully connect to the web service and operate as normal. why GoDaddy would not have been in there valid publishers list? All of the servers we have running has GoDaddy as a valid authority. I'm guessing, for security reasons, they've uninstalled the authority for GoDaddy, but not totally convinced that there's not some other underlying issue.
Unfortunately, I haven't had much luck trying to recreate this locally. If I go into Internet Options and remove the GoDaddy authorities and hit our service, ssl works just fine. I go back into the list of publishers and GoDaddy gets put right back in. So my second question is, How the heck do you get rid of GoDaddy so I can get an invalid cert warning?
Okay, last question. Is there a way in code I can tell the web service to ignore invalid certs. I've seen some posts on doing this programatically with WCF but not old web services.
View 2 Replies
Jun 9, 2010
I need to check whether the request will return a 500 Server Internal Error or not (so getting the error is expected). I'm doing this:
HttpWebRequest request = WebRequest.Create(url) as HttpWebRequest;
request.Method = "GET";
HttpWebResponse response = request.GetResponse() as HttpWebResponse;
if (response.StatusCode == HttpStatusCode.OK)
return true;
else
return false;
But when I get the 500 Internal Server Error, a WebException is thrown, and I don't want to depend on it to control the application flow - how can this be done?
View 2 Replies
Nov 1, 2010
I have a web page that uses System.Net.HttpWebRequest class that used to work perfectly fine for 2 years, and then all of a sudden I started to get the following error.[WebException: The operation has timed out] System.Net.HttpWebRequest.GetResponse() +5314029Also, I tried the application on my local machine and it works fine, do you think it is a setting change on my hosting server?I already tried the response.close and it didn't work.
View 10 Replies
Dec 23, 2010
how can I remove the protocol from URI? i.e. remove HTTP
View 4 Replies
Mar 17, 2010
Detailed Error Information
Module
IIS Web Core
Notification
Unknown
Handler
Not yet determined
Error Code
0x80070032
Config Error The configuration section 'connectionStrings' cannot be read because it is missing a section declaration Config File \?C:inetpubvhostscno-o.comhttpdocsweb.config
View 9 Replies
Jun 22, 2010
i'm developing windows application one of its forms supposed to fill a table called rooms with data throughout a collection of text boxes and comboboxes controls, i'm successfuly bound each control to the binding source and make sure that each data adapter contains the required data but when i start to excute the insert statement
insert into rooms([room_id],[floor],[price],[currency_id],[rec_id],[s/d],[s/ns],[room_direction],status)
values( '"+Int64.Parse(textBox1.Text) +
"' ,'" +
Int64.Parse(textBox2.Text) +
"', '" +
Int64.Parse(textBox3.Text) +
"','" + comboBox1.SelectedIndex +
"','" + comboBox2.SelectedIndex +
"','" + comboBox3.SelectedIndex +
"','" + comboBox4.SelectedIndex +
"','" + textBox4.Text +
"','" + comboBox5.SelectedIndex +
"')
it displays an error message when i'm trying to select a value from the combobox for any parameter that is"column currenc_id is constrained to be unique value 2 is already exists"can any body help me it is very important
View 5 Replies
