Error Adding Service Reference The Server Committed A Protocol Violation?
Aug 19, 2010
After moving application to shared hosting I cannot add service reference to .asmx and WCF services that used to work on dedicated server.The error in adding WCF service reference is:
There was an error downloading 'address ... Service.svc'.
The server committed a protocol violation. Section=ResponseHeader Detail=CR must be followed by LF
Metadata contains a reference that cannot be resolved: 'address ... Service.svc'.
The server committed a protocol violation. Section=ResponseHeader Detail=CR must be followed by LF
The server committed a protocol violation. Section=ResponseHeader Detail=CR must be followed by LF
If the service is defined in the current solution, try building the solution and adding the service reference again.asmx web reference:There was an error downloading 'address ... .asmx'.
The server committed a protocol violation. Section=ResponseHeader Detail=CR must be followed by LF
There was an error downloading 'address ... .asmx/$metadata'.The server committed a
View 3 Replies
Similar Messages:
Nov 25, 2010
I successfully added the web service reference and tried to call it with this line of code:SuccessGetLead lead = service.getLead(paramsgetlead);
[WebException: The server committed a protocol violation. Section=ResponseStatusLine]
System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) +263
System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) +4
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +172
com.marketo.soap.MktMktowsApiService.getLead(ParamsGetLead paramsGetLead) in c:Usershubert.griningerAppDataLocalTempTemporary ASP.NET Filesdynaweb200782e21235d41bf12aApp_WebReferences.liqikruc.7.cs:206
[code]...
View 1 Replies
Oct 7, 2010
I got an error and do not know how to fix it!
Fiddler has detected a protocol violation in session #2331.
Content-Length mismatch: Response Header claimed 1939 bytes, but server sent 1983 bytes.
View 1 Replies
Aug 25, 2010
I am getting this error while loading(adding) it into service References (web client)
The type 'WcfTrial2.Calculation', provided as the Service attribute value in the ServiceHost directive could not be found.
How to resolve it?
View 1 Replies
Oct 20, 2010
I added a service reference via the add service reference method. I can see all of its services in the intellisense but when I run the project and it executes the line where I instantiate the service : MyProjectName.ServiceReferenceName.IServiceReferenceClient
client = new MyProjectName.ServiceReferenceName.ServiceReferenceClient;it throws this error:Could not find default endpoint element that references contract 'ServiceReferenceName.IServiceReferenceClient' in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element.
View 2 Replies
Feb 10, 2011
I'm currently trying to work out the best way to build this web application, which will then be intergrated on other systems, such as WinForms, Intranets etc.
We hope to include the usual layers i.e. DAL, BLL, BOL and UI but I have been experimenting with Entity Framework 4 and WCF Data Services and managed to get something in place where I was using WCF as a gateway to EF4.
i.e. Adding a Service Reference to my project and then using the EF4 context and writing LINQ queries against the DB
e.g.[Code]....
Now with the current setup I would still need to write a DAL Class Library, that interacts with the Data Service, because as I said WCF Data Services only seems to be a gateway, I can't see where to put the code (above) in the Data Service and then how I could these methods.
My questions are: 1. How do I develop a WCF Data Service in such a way to allow this behaviour - I know how I could do it using ASMX web service, something like [Code]....
2. If I am to use WCF Data Services, how is serialization handled (if at all) - again I know how to do something in ASMX web services
3. Again, If I am to use WCF, how do I add Security and only allow my applications to access the web service - for obvious reasons
4. Would it be possible / logical to also include the Business Logic Layer into the web service?
View 4 Replies
Mar 17, 2011
How to create an instance of web service without adding web service reference? How to identify the server address/name where the web service is hosted from C# code?
View 1 Replies
Dec 13, 2010
I am recieving the following error when I try to browse to "http://10.28.2.246/SQLDataService.svc" yet it works fine at "http://localhost/SQLDataService.svc".
Server Error in '/' Application.
No protocol binding matches the given address 'http://10.28.2.246/SQLDataService.svc'. Protocol bindings are configured at the Site level in IIS or WAS configuration.
Description:
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidOperationException: No protocol binding matches the given address 'http://10.28.2.246/SQLDataService.svc'. Protocol bindings are configured at the Site level in IIS or WAS configuration.
Source Error:
[Code]....
Stack Trace:
[Code]....
Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
Am I correct in my belief that this is caused by the Web.config file?
[Code]....
View 6 Replies
Feb 2, 2012
I have a number of .Net web sites built in VS2010 using Framework 4.0that reference a web service to send emails.
My most recent site I created as a web application as opposed to a web site. In the Solution Explorer you can add a 'Service Reference' and, if you click the Advanced button you can then add a reference to a web service.
I did that and now the (web application) site won't build - it says it cannot load the Ajax dll. If I remove the reference to the web service, the site builds okay - if I add the reference back in, the site will not build.
Do I need to abandon the idea of using a 'Web Application' and turn it into a 'Web Site'?
View 9 Replies
Sep 1, 2010
I am getting an error when i try to add a service reference of a WCF service. Error details is below. My web service is hosted on a different server and my client is on different server. When i run the service directly from IE i can see the service but adding it in .net web application i get error.
[Code].....
View 1 Replies
Jul 8, 2010
I am adding a reference of class library in web service in VS2008 and it is not copying the .config file from class library to web service. I have checked the property "Copy to output directory" of .config file and its value is "Copy Always".
View 3 Replies
Mar 27, 2011
so I've set up the table as described.. (seems to be some directions missing with regards to, is identity? and is Primary Key? and what those values are and should be set to for name, description, and price durring table setup) So, ive tried to set the table up as directed and then go on to click DATA which allows me to fill in the table. I can fill in the table all the way accross but when i reach the end of the first row it says:
INVALID DATA your change could not be committed to the database. after you click OK you can fix the invalid entry or press to cancel your changes.
View 4 Replies
Sep 9, 2010
I have an old COM+ object that we've used to create AD user accounts with information from our HR system. This process has been broken since a recent upgrade, so I'm attempting to modify the object to point to a new DC and a new inforamtion store during mailbox creation. After modifying the code I am unable to get an account to be crated and the following error appears:error '8007202f' Automation error A constraint violation occurredI am not a developer and I know that this is a long shot but if anyone has any insight into if this is an AD issue or one with VB 6, any help at all would be greatly appreciated. I think this is the relevent code but again, I'm an admin not a developer:
thenewuser.SetInfo
thenewuser.SetPassword "NewBie!!!"
thenewuser.AccountDisabled = False
[code]...
View 3 Replies
May 18, 2010
just added reference to jquery minified and block ui on my page through scriptmanagerproxy and it throws error on page load.
<asp1:ScriptManagerProxy ID="ScriptManagerProxy1" runat="server">
<Scripts>
asp:ScriptReference Path="~/script/jquery-1.2.6.min.js" />
<asp:ScriptReference Path="~/script/jquery.blockUI.js" />
<asp:ScriptReference Path="~/script/Default.js" />
</Scripts>
</asp1:ScriptManagerProxy>
View 10 Replies
Sep 24, 2010
I am a bit new to ASP.Net Ajax and as such new to Ajax itself. I have a site which uses ASP.Net Ajax. It used the version AjaxControlToolkit version 3.0.30512.0. I have now changed it to version 3.5.40412.2 by deleting the old reference and adding a reference to the latest one . I build the soultion and everything appears fine witjhout any errors. But the site fails to load showing a yellow page with the message AjaxControlToolkit Version="3.5.40412.2" missing reference to 'AjaxControlToolkit.ExtenderBase.Base Scripts.js.BaseScripts.js'. What does this mean ?
View 2 Replies
Dec 8, 2010
i have added a service reference but i am unable to access the methods, there is a method call "GetContactById" which i can see when i add the service but i am unsure how i can get to this in code. i have tried creating an instance first but i get this error
Error 116 Core.omnetService.OMWCoreSoap' is a 'type', which is not valid in the given context
omnetService.OMWCoreSoap test = omnetService.OMWCoreSoap();
test.GetContactById(strKey, UserId.ToString());
what is the best way to solve this?
View 4 Replies
Apr 28, 2010
when svc.getLookupList(reqobj) will call i get following error.
"There was no endpoint listening at http://rets.newjerseymls.com/rets that could accept the message. This is often caused by an incorrect address or SOAP action."
View 3 Replies
Nov 27, 2010
In the database one number like a 91-9685748596 and, 2nd number like 9122-9685748596 and another one is 9685748596 .when we are try to formate it using substring function it all are may be9685748596,9685748596,9685748596.Mobile number is assigned as a primary key.so its showing error "Primary key violation".We can not the remove primary key also and there are 50 lack data in our database.
View 6 Replies
Mar 10, 2011
I have four tables test1, test2, test3, test4
they dont have any primary keys.
I have a patient entry table, which has patientID as primary key. if I want to retrieve tests information about a particular test then I have to add a pid as foreign key??
do i have to add a test_ID kinda field in all four tests tables????
how to do this in sql server management studio.
View 7 Replies
Jun 11, 2010
i am working on an mvc page that allows users to securely logon via a colorbox modal window. the modal is layed out something like this:
<html>
<body>
<div id="overlay" style="display: block;" class="overlay"> <div>
[code]...
thats the basic layout.what happens is when the iframe form is authenticated, it calls parent.$.fn.colorbox.close() which closes the modal and reloads the parent page.now the problem is the colorbox.close script is in the parent page (not the iframe) so it cannot be called from the iframe due to the protocols being different (https and http).so how can i either call the script cross protocol (which i believe you cant do) or from the iframe set the colorbox div's display attribute to none and hiding the overlay. this would hide the modal just as well but can the code in the iframe talk to the parent pages html? if it could i would use something like:
$('#colorbox').attr('style', 'display: none;');
but that jquery doesnt work.
View 1 Replies
Aug 23, 2010
we have an existing ASP.net application that is undergoing expansion. The new functionality is all written in Silverlight 4. As part of that expansion I gutted all the old Linq to SQL and put Entity Framework 4 into place. To do this I created a standard .net Class Library and added my edmx files there. Naturally, the business entities created by this cannot be used in Silverlight. So I created a Silverlight Class Library and added all the business entities to that Silverlight Class Library as linked files. I changed the name space to be the same.
So I have the following assembly / namespaces
Company.Project.Dal.csproj / Company.Project.Entities (.net 4 class library)
Company.Project.Entities.csproj / Company.Project.Entities (SL4 class library)
With this architecture I was able to share my business entities with my SL enabled web services, my asp.net projects, my silverlight projects. Really it's a beautiful thing.
Once this was done I added "message" classes to Company.Project.Dal and again shared them with the other entites using linked files. These messages are things like MyObjectRequest; they are classes that have properties that can set to the ID of the record in the database you want to get, a search string for filtering by last name, first name, etc. (This is in the style of the Web Service Factory if you're familiar with that.)
Finally I turned the whole message into a generic using a base class called EntityRequest
[code]...
I corrected this error and everything went well for a week until I had to make my first change to the service interface. I added a new operation contract, clicked the handy Update Service Reference on my client and boom.
View 6 Replies
Mar 3, 2011
I have developed the WCF service as follows.
1) Service Contracts in a project
2) Data Contracts in a project
3) Finally adding the reference of service contract project in a Hosting project (Console Application) with complete configurations.
I am adding one more windows app project as a client.When i am trying to add the service reference using the address "http://localhost:8000/Tasks", VS 2008 displays the below error.
There was an error downloading 'http://localhost:8000/Tasks'.
Unable to connect to the remote server
No connection could be made because the target machine actively refused it 127.0.0.1:8000
Metadata contains a reference that cannot be resolved: 'http://localhost:8000/Tasks'.
Could not connect to http://localhost:8000/Tasks. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:8000.
Unable to connect to the remote server
No connection could be made because the target machine actively refused it 127.0.0.1:8000
If the service is defined in the current solution, try building the solution and adding the service reference again.
View 3 Replies
Apr 3, 2010
I am encountering an error when attempting to log into a web app (via a login page) on one of my servers. The web app is an IMAP4 client under development that should connect to the mail server currently running on the same machine. I am successful at connecting to the mail server from my development workstation running an IMAP4 desktop client under similar development.The error is... An address incompatible with the requested protocol was usedThe login page works fine in my development environment on my local workstation (connecting to the local mail server). A little research suggests the error has something to do with IPv4 vs IPv6 addressing, but I'm not sure. I have 2 network adapters in this server, for each of which IPv6 is not enabled. I have successfully reset the TCP/IP stack on the server (netsh Winsock reset) but still the error returns. Only one of the adapters is enabled and being used.
View 4 Replies
Mar 5, 2010
I just installed Oracle 10G Express Edition. Installation was successful, when I tried to connect the database usingScott/tiger or hr/hr it does not Connect and throwing an exception :ORA-12560: TNS:protocol adapter errorHow can I get rid of this error to connect to the database.I am using Windows Vista 64 Bit OS....
View 5 Replies
Apr 27, 2010
I'm new to asp.net and I'm building a project in which I send data to a database MSSQL, I've set a constraintname on some fields that I wantto be unique, now how do I catch that error when people insert a duble and handle it with a redirectionto custom error pagehere the code just in case you need it
Dim con As New System.Data.SqlClient.SqlConnection
con.ConnectionString = "Data Source=localhost;Initial Catalog=Database1;User ID=user;Password=password;TrustServerCertificate=True"
Dim myCommand As New System.Data.SqlClient.SqlCommand
myCommand.CommandText = "INSERT INTO serves(CategoryID,UserId,vote, Img, link, Description) VALUES('" & DropDownList1.SelectedValue & "','" & UId.Text & " ' ,1,'" & TextBox1.Text & "','" & "<a href=" + TextBox2.Text + ">" + TextBox4.Text + "</a>" &
"','" & TextBox3.Text & "')"
myCommand.Connection = con
con.Open()
myCommand.ExecuteNonQuery()
View 5 Replies
