I generate my check boxes dynamically:
for (int i = 0; i < dtCommon.Count; i++)
{
CheckBox newBox = new CheckBox();
newBox.Text = dtCommon[i].userName; [code]...
And when the save button is pressed I call this function:
protected void SaveUsers(object sender, EventArgs e)
{
}
How do I know which check boxes the user has checked?!
finding all check boxes in asp.net grid view is checked or not.
Depending on this I have to grayed out a button...
I have to enable the button depending on all check boxes are checked..
how to do this and on which event i have to place my code.
note that the scenario is ASP.NET Webforms + Master - Content page which mess up the ids.
I have, say, three checkboxes
<asp:CheckBox ID="chkConsultantQuality" runat="server"
CssClass="company"/>
<asp:CheckBox ID="chkConsultantEnvironment" runat="server"
CssClass="company"/>
<asp:CheckBox ID="chkConsultantSafety" runat="server"
CssClass="company"/>
I would like to make a div id="CompanyPanel" on click event of each checkbox according to the following condition
visible if any of the checkboxes are checked.
hidden if all of the checkboxes are unchecked.
I am planning to use jQuery since I am selecting by class name. I could do it with jQuery.each on the class='company' by checking each for a checked flag.
how can i checked the checkbox in parentGridview whenever i checked a checkbox in childGridview?
View 1 RepliesThere are 10 check boxes in one page. How to code to allow user only check one?
View 1 RepliesI have to select checkboxes besed on group column values. If you see below gridview, column 3 (GroupNo) has 1,1,1,1,2,2,2,2....etc (this column data is not static, will change based on page index. i.e PageIndex =2 may starts with 7,7,7,8,8,8,8,8,9,9,9 etc).
In every sectio/Group User must and should select minimun 2 check boxes. so If user select only one check box we need to show a pop up message as " select One more check box in that particular section" If User skips the message and move to next section we have to show the same message. We have to force the user to select more than one checkbox in the same section.
Mainly our intention is the check boxes whatever user selected in each section/Group belongs to one Category.
I have 10 asp.net checkboxes in my webform i want if user select 4 checkboxes then on continue button click event it redirect to Default.aspx else if user select 6 checkboxes then click on continue button then javascript alert box will pop up and user will not redirect to default.aspx ...
View 2 Replieswhen we select a check boxes creat dynamic check boxes. I have a main catagory check box when we select this main catagory check box creat subcatagory check boxes related to main catagory dynamically.
View 1 RepliesI have some code here in view-page
[Code]....
How can I get checked value from chechboxes above .
I'd like the output checked field wrapped in
[Code]....
What Datatype (if needed) should i create in the model ?
If i have 3 asp.net checkboxes in my asp.net webform namely : CheckBox1, Checkbox2, Checkbox3 and a textbox namely textbox1
If Checkbox1.text ="1"
Checkbox2.text ="2"
Checkbox3.text ="3"
I WANT :
if checkbox1 is already checked ... if checkbox is remain checked and even after i check checkbox2 and checkbox3 then the output in textbox would be 2,3 ..... by ignoring already checked checkbox text ...
LOGIC I WANT : Ignore already check checkboxes and insert recent checkbox text to textbox1 as comma seperated string ...
I have a check box in the grid.IF IsChecked has a value checkbox should be checked else not.Should i check the check box in the ItemDataBound event or will it get checked automatically.
<asp:DataGrid Runat="server" ID="gridProduct" AllowPaging="True">
<Columns>
<asp:TemplateColumn HeaderText="Employee Name">[code]....
To preface, I have just started leaning ASP.NET and have not worked with VB in 10 years. My boss just dropped an "easy" project in my lap that I don't even know how to start and he wants it done tomorrow (literally).
The desired output is simple - a form elsewhere on the site uses a field called status codes associated with a record to limit the values (other status codes from the same list) in a dropdown box. He wants a page that enables an admin to change what values are available in the dropdown box:
It should have a dropdown box where the admin can select a status code to update.
Then it should have a 2 column grid listing all status codes. The first column should consist of checkboxes where those in a lookup field (used to limit the dropdown values mentioned above) are already selected. The admin should be able to check/uncheck all the boxes and update the lookup field. The table has basically three fields:
Status ID: a numeric ID (ex. 10)
Status Code: a description (ex. "Sent to SSC")
Lookups: varchar, comma separated values that correspond to Status ID (ex. 10,20,30,190,980,990)
The Lookups field confuses me the most. I'm guessing that I need to read in the values into an array and write something to check the boxes that match. Then an update statement to combine back together with commas and update the field. I have no idea how to do any of that. All I have so far is a dropdown box listing status codes.
i generated dynamic checkbox n placed it in table cell( <td runat='server' id="trial"></td>) ,
i am not able to check whether check is checked when i click a button.
i recieve exeception :System.NullReferenceException was unhandled by user code
[Code]....
I have 3 webforms controls: 3 checkboxes and 1 textbox. When I check checkbox1 and checkbox2, then in the textbox it should appear as 1,2. How can this be done using ASP.NET webforms controls?
View 1 RepliesI have a page that im using javascript to do a select all / unselect all for my checkboxes on the page. Now i need to determine in the code behind if all of them are checked, im wondering if it would be easier to just set a session or something whenthe select all is checked, but that wouldnt be accurate, because after you select all, you still can uncheck some..
So i need it to check at the time the button is clicked.. there are currectly 30 checkboxes, NOT a checkboxlist.
I tried using the site search but getting an error has occured when i click to search..
i want to insert checkbox text only if they are checked. .. how to do that ..
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
TextBox1.Text = Request.QueryString("txt")
Dim splitted As String() = TextBox1.Text.Split(",")
For Each id As String In splitted
Dim ctrl As Control = Page.FindControl("checkbox" & id)
If Not ctrl Is Nothing Then
Dim chkbox As CheckBox = DirectCast(ctrl, CheckBox)
chkbox.Enabled = False
Dim arrList As New ArrayList()
'populate the list with some temp values
arrList.Add(CheckBox1.Text)
arrList.Add(CheckBox2.Text)
'databind the list to our repeater
Repeater1.DataSource = arrList
Repeater1.DataBind()
End If
Next
End Sub
This code will add all checkboxes whether it is checked or not !
so that only checked checkboxes would be added in array list
I have a checkboxlist control in ASP.NET
<asp:CheckBoxList ID="chkchrges" runat="server">
</asp:CheckBoxList>
I am binding in following way
chkchrges.DataSource = objclsChargeMaster
chkchrges.DataTextField = "chrgdcd"
chkchrges.DataValueField = "chrgcd"
chkchrges.DataBind()
And i am trying to get values (value member) of checked checkboxes
I am trying in folllowing way but each time it rerurns false on
li.Selected
For Each li As ListItem In chkchrges.Items
If (li.Selected) Then
Dim XX = li.Value
'' Do something with Value
End If
Next
i'm using a gridview and has a column of checkbox that is within a template field.
I want to do it in C# but I only found this code in VB
[Code]....
How to get The Rowindex Of Gridview by clicking button outside gridview in ASP.Net?
View 1 Repliesi want to disable other checkbox if one is selected inside gridview . i want to make that on clientside using javascript or jquery.below is the code
<html xmlns="http://www.w3.org/1999/xhtml" ><head runat="server">
<title>Untitled Page</title>
<script src="selectedradio.js" type="text/javascript"></script>
<script type="text/javascript"> $().ready(function(){
$("#CheckBox1").click(function(){
$('input[type=checkbox]').each(function () {
[code]....
I have many country check boxes on page and i want to search data from database based on check boxes checked i.e. user can check check single or multiple checkboxes. So how can i fetch the data/records from database based on same.
View 1 RepliesI have a gridview and users would select some records and would click on the submit button and i will be saving those records into database using a stored proc.... now .... just below the gridview and above the submit button there are few checkboxes by default they wud be checked. How would i save the selected values and the checked boxes in database i wrote the stored proc for the gridview but how would i save the checked checkboxes into the same table.
For i As Integer = 0 To gvSelectScreen.Rows.Count - 1
Dim chkTemp As CheckBox = TryCast(gvSelectScreen.Rows(i).FindControl("cbStatus"), CheckBox)
If chkTemp.Checked Then
ContractNumber = gvSelectScreen.Rows(i).Cells(0).Text
ClientProgramNumber = gvSelectScreen.Rows(i).Cells(1).Text
ClientProgramName = gvSelectScreen.Rows(i).Cells(2).Text
StartDate = CType(gvSelectScreen.Rows(i).FindControl("txtStartDate"), TextBox).Text
EndDate = gvSelectScreen.Rows(i).Cells(5).Text
Dim connStr As String = ConfigurationManager.ConnectionStrings("MainConnectionString").ConnectionString
Dim myCon As New SqlConnection(connStr)
Dim cmd As New SqlCommand("usp_ParametersFromGrid")
Dim dt As New DataTable
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@ContractNumber", SqlDbType.VarChar, 22).Value = ContractNumber.ToString()
cmd.Parameters.Add("@ClientProgramNumber", SqlDbType.VarChar, 22).Value = ClientProgramNumber.ToString()
cmd.Parameters.Add("@ClientProgramName", SqlDbType.VarChar, 100).Value = ClientProgramName.ToString()
cmd.Parameters.Add("@StartDate", SqlDbType.VarChar, 20).Value = StartDate.ToString()
cmd.Parameters.Add("@EndDate", SqlDbType.VarChar, 20).Value = EndDate.ToString()
cmd.Parameters.Add("@RequestID", SqlDbType.VarChar, 50).Value = RequestID.ToString()
cmd.Connection = myCon
myCon.Open()
cmd.ExecuteNonQuery()
myCon.Close()
End If
Now above the submit button as i said, there are few checkboxes and they are checked by default...how would i save the selected item (in the gridview and the checked checkbox values in the same row in the database(sql server)
I have situation where I have to show checked CheckBox in a GridView. I have three tables
1) Menu Items ( Fields: menuID, menuName, menuLink, .....)
2) User Types (Fields: userTypeID, userTypeName, ...)
3) User Menus (Field: menuID, userTypeID )
I have a screen to add new Menu Items where I am showing a Grid That has two columns
1) CheckBox and
2) User Type
I have to check CheckBox in order to Link that User Type with the Menu Itme. I am done with Add Screen. Here is the Code:
(aspx)
<asp:GridView
ID="gridView_UserTypes"
runat="server"
AutoGenerateColumns="False"
DataKeyNames="userTypeID"
Width="60%"
EmptyDataText="">
<HeaderStyle
CssClass="gridHeader"
Wrap="false"
/>
<AlternatingRowStyle
CssClass="gridAlturnateRow"
/>
<RowStyle
CssClass="gridRow"
/>
<Columns>
<asp:CheckBoxField
DataField="userTypeChecked"
HeaderText="Select"
ReadOnly="false"
Visible="true"
/>
<asp:TemplateField
HeaderText="Select">
<ItemTemplate>
<asp:CheckBox
ID="userTypeSelector"
runat="server"
/>
</ItemTemplate>
<ItemStyle
HorizontalAlign="Center"></ItemStyle>
</asp:TemplateField>
<asp:BoundField
ItemStyle-HorizontalAlign="Left"
DataField="userTypeName"
HeaderText="User Types"
HeaderStyle-Wrap="false"
ReadOnly="True"
SortExpression="userTypeID">
<ItemStyle
HorizontalAlign="Left"></ItemStyle>
</asp:BoundField>
</Columns>
</asp:GridView>
(Code Behind)
foreach (GridViewRow row in gridView_UserTypes.Rows)
{
// Access the CheckBox
CheckBox cb = (CheckBox)row.FindControl("userTypeSelector");
if (cb != null && cb.Checked)
{
// First, get the UserTypeID for the selected row
int userTypeID = Convert.ToInt32(gridView_UserTypes.DataKeys[row.RowIndex].Value);
if (selectedUserTypeIDs == "")
{
selectedUserTypeIDs = userTypeID.ToString();
}
else
{
selectedUserTypeIDs = selectedUserTypeIDs + "," + userTypeID.ToString();
}
userTypeCount++;
}
}
Now I am passing selectedUserTypeIDs along with other details to my Stored Procedure and adding those UserTypes for newly Added menu. It works fine for me. Now I want to show checked CheckBox in Edit Mode.
I have a GridView with checkboxes. I want to let the user choose one or several checkboxes. Right now my code only manages to find one of the chosen checkboxes:
[Code]....
How do I change it to find the values from every row that has a checked checkbox?
I have a GridView with checkboxes. How can I count how many checkboxes are checked?
[Code]....