Compare Validators To Allow Comma And Dot (both!) As Decimal Separator?
Feb 4, 2010
I am using a compare validator, which validates that the entered number is a valid double and also validates it against a given value (greater than zero). I am validating money amounts. Because of the location where the app is used, the locale sets the comma as the decimal separator. The problem is that when a user enters the value using the numeric keyboard, the number gets written with the dot as decimal separator, and is rejected by the validation. I'd like to have this validation done before triggering a postback (like a customvalidator would) and accepting both separators.
View 1 Replies
Similar Messages:
Jan 18, 2011
I am generating an output on a webpage in a format like this
({"1":"Jeff","2":"Tom","3":"Michael",})
For this, basically this is the code I am using
Response.Write("(" + "{");
//
for (Int32 i = 0; i < k.Length; i++)
{
Response.Write(Convert.ToString(k.GetValue(i)) + ",");
}
//
Response.Write("}" + ")");
Notice my output, after Michael" there is a comma which I do not want since this is the last vaue but this is appearing since , is in the for loop. How to prevent this/remove this last comma from appearing?
My output should be ({"1":"Jeff","2":"Tom","3":"Michael"}) (There's no comma after last value here)
View 8 Replies
Feb 8, 2010
I'm developing a web application which get number with decimals. When I write 0.08 the rangevalidator understand 80 and it doesn't valid it. It does well if I write 0,08.The most extrange is In the develpoing computer and in the client computer I have the point as decimal separator in regional settings.Where can I change the decimal separator por rangevalidator in the cliente computer?
View 1 Replies
Aug 3, 2010
We are trying to use the
[Code]....
Control from the AJAX Control Toolkit, but can find no way to make it use a comma as a decimal separator instead of a point. Other controls such as the [Code].... will automatically use the Page Culture and adapt their content according to it. Do anyone know a way to change the Decimal Separator?
View 4 Replies
Jun 20, 2010
I'm trying to format a data bound value as below, but I keep getting a space as the thousands separator, i.e. the displayed text is always "12 340.00" when it should be "12,340.00".
What am I missing?
<asp:TextBox ID="budgetText" runat="server" Text='<%# Bind("Budget", "{0:#,0.00}") %>'></asp:TextBox>
View 1 Replies
Jul 9, 2010
For Asp.Net Charts i m able to show value by setting the property as
Chart.Series(Series1).IsValueShownAsLabel=True
I want the shown values to be formatted in terms of decimal places and a thousand separator
Chart.Series(Series1).LabelFormat = "0:#.##" is Not Working
View 7 Replies
Nov 2, 2010
how to Add comma in my Decimal value 11000. i want to result like this 11,000.00
View 4 Replies
Nov 17, 2010
I am trying to see the validation part working. I have few required field validators and compare field validators, etc.
<div>
<asp:RequiredFieldValidator ID="rfvCompany" ValidationGroup="groupProfile"
ControlToValidate="txtCompany" runat="server"
ErrorMessage="- Company Name Required" Display="Dynamic" />
</div>
[Code]....
View 2 Replies
May 5, 2010
I am using regular expression validator for Numbers, Comma and Decimal.. The expression is given below.
mNumValidator.ValidationExpression = "^(d|,)*.?d*$"
Now I would like to have 5 digits behind decimal.
View 7 Replies
Nov 22, 2010
I am using rdlc report, i have a column in database which i want to display in the report.
vehicleDamageArea=1,2,3
In the report i need to mark the placeholders with these values .
=iif((Fields!vehicleDamageArea.Value="3"),Chr(253) ,Chr(168)) like this.
But as we know,it will check the whole value 1,2,3="3" not the spilted values.
View 3 Replies
Apr 7, 2010
Split the input string based on the separator list passed. Returned string list should have separators in it.
.NET API needs to be implemented
string [] SplitWithSeparators( string inputText, string[] separators)
Input
inputText: passed string
RAMESH EMPCODE 001 SURESH EMPCODE 002 GIRISH EMPCODE 003
Separators: passed string[]
string [0] : TRINATH
string [1] : SHARATH
string [2] : SRIDHAR
THIS OUTPUT I SUPPOSE TO GET
Output
string [0] : TRINATH EMPCODE 001
string [1] : SHARATH EMPCODE 002
string [2] : SRIDHAR EMPCODE 003
View 5 Replies
Jul 21, 2010
I have a page where I am using 2 update panels. The first update panel contains a form that has some validation tied to it. The second on has a simple form, but no validation. When I go to use the form in the second panel, the postback is halted by the validators in the first panel. Everything works as it should when I remove the validators.
View 2 Replies
Aug 22, 2012
i hav one data table in which some decimal values are up 6 decimal places.. im trying to bind that Data table to DataGridView while binding i want to round decimal values up to two decimal palces here is my code
dt.Columns.Add("Orderid", typeof(string));
dt.Columns.Add("tagnumber", typeof(string));
dt.Columns.Add("Minimum Value", typeof(string));
dt.Columns.Add("Maximum Value", typeof(string));
int count = ds.Tables[0].Rows.Count;
for (int i = 0; i < count; i++)
[code]...
hows hould i round up while binding..?
View 1 Replies
May 7, 2015
I was read your post: "Export GridView to Excel in ASP.Net with Formatting using C#" and is very useful. That code works perfect. But I need create a new format for a specific column in my sheet before to export it. For example:My DataTable have a column with decimal numbers and I'm trying reduce the tenths for each number.I want this: 2,874444 ----> 2,87 for a specific range. In this case I need it for all numbers in the column 13 or well said for the Column called N in Excel. Only reduce two tenths.
I used:
xlWorkSheet.Range["N"+h,"N"+h].NumberFormat = "0.00";
And no works (h is for rows, N is the column. Into a foreach).
View 1 Replies
Apr 6, 2010
I'm trying to execute this statement every minute with SQL Agent, I have it set up as a job:
[Code]....
It's trying to update a column which data type is set to decimal. Just so you know what I really need out of it, here is an example:
[Code]....
The answer of which should add on 0.5 to the original value. If I were to use the increase value of 60 which then becomes 60/60 it will work.I'm dividing by 60 because the increase value is per hour so I make it smaller to get per minute value. Why is it doing this?
View 2 Replies
Mar 3, 2010
Some values are returning 2.0 but I need it to be 2.00 as this is a money value that is displayed to the web page.
I am doing:
Math.Round(value, 2);
Is there a way to force it to 2 numbers after the decimal?
View 3 Replies
May 5, 2010
I need a validation regex for decimal. It should allow upto 5 digits after decimal.
Allow:
1
1.0
12.0
12.01
123.01
1,123.01
1,123.013
21,123.01234
3,21,123.01234
How Can I do regex for this?
View 4 Replies
Feb 28, 2011
I got a decimal member in my viewmodel and get populated from the database (say 55.5, or 100.00)
In my view I use TextBoxFor<> for this member.
Is there any way to have a number (it's actually a percentage) like 100.00 display as 100 instead, and 55.50 as 55.5?
View 1 Replies
Jan 10, 2011
When attempting to place controls in different content areas using Masterpages and trying to use a compare validator, I get the error: Unable to find control id 'txtStartDate' referenced by the 'ControlToCompare' property of 'cvlDate'. I have also attempted to set it within the c# code behind in page load: cvlDate.ControlToCompare = txtStartDate.ID and by using findControl there must be an easy way to achieve this?
<asp:Content ID="Content4" ContentPlaceHolderID="leftForm" Runat="Server">
<asp:Label ID="lblStartTimeEnter" runat="server" Text="Start Time:" Width="100px"/>
<asp:TextBox ID="txtStartTime"runat="server" MaxLength="50" Width="250"/>
</asp:content>
<asp:Content ID="Content4" ContentPlaceHolderID="rightForm" Runat="Server">
<asp:label ID="lblEndDateEnter" CssClass="formMargin labelInput" runat="server" Text="End Date:" Width="100px"/>
<asp:TextBox ID="txtEndDate" CssClass="formMargin" runat="server" MaxLength="20" Width="250" ClientIDMode="Static"/>
<asp:CompareValidator ID="cvlDate" runat="server" ControlToValidate="txtEndDate" ControlToCompare="txtStartDate" Operator="GreaterThan" Type="Date" ErrorMessage="Start Date must be before End Date" > *</asp:CompareValidator>
</asp:content>
View 9 Replies
Feb 15, 2010
I am using compare validator to compare date... But Its not working ...I have used calendar extender...with date format as "dd/MM/yyyy"...
View 3 Replies
Apr 17, 2010
I am trying to check for a condition such that a date in an input control (textbox) is not greater from a date 1 years from current date(exactly) and also it should not be less than a date 1 year back from current date. for eg. if today's date is "21/dec/1990" then usen cannot enter a date in textbox which is less than 21/dec/89 and it should not be greater than 21/dec/1991. for this i first tried to confirm the greater than condition, i wrote the following code:
<asp:TextBox
ID="TxtSessionFrom"
runat="server"></asp:TextBox>
<asp:CompareValidator
ID="CompareValidator1"
runat="server"
ControlToValidate="TxtSessionFrom"
ErrorMessage="CompareValidator"
Operator="GreaterThanEqual"
Type="Date"></asp:CompareValidator>
CompareValidator1.ValueToCompare=(DateTime.Now.AddYears(1).ToString());
but this gave an error: The value '' of the ValueToCompare property of 'CompareValidator1' cannot be converted to type 'Date'.
View 7 Replies
Feb 15, 2011
int Def[0] = {6};
iMaxValue = 55;
decimal val = Decimal.Round(Convert.ToDecimal((DefCount[I]) / iMaxValue),3);
here if i try to run this it says answer 0 ; but if i want 0.1090
View 1 Replies
Jul 6, 2010
I have a TextBox inside my .rdlc file contains decimal numbers. I want to separate its numbers in every 3 digits. How can I accomplish this?
View 1 Replies
Apr 15, 2010
I have registered the following SEO friendly route:
[Code]....
Anyone an idea how to fix this problem? Returning a 404 is not a nice UX when (in our case) only the id really matters ...
View 7 Replies
Mar 12, 2011
I'm trying to use DetailsView of asp.net to display data in the following format:
Name: Adam
Age: 18
Gender: M
And I wanted to add a lines (gray image) between each two rows
Name: Adam
Age: 18
Gender: M
I managed to put the image as another row between each two rows, but it make it start only on the second column (of the data) because the first column "saved" for the header (which is empty)
anyone knows how can put the image between the rows and make it "use" the whole line?
I did what I did using:
<asp:TemplateField>
<ItemTemplate>
<img src="../Images/thin_grey_separator.png" alt=""/>
</ItemTemplate>
</asp:TemplateField>
View 1 Replies
