I have a gridview which contains a dropdownlist inside a TemplateField. The ddl appears correctly and seems to work ok but it isn't updating the table despite being bound to a field.
[Code]....
There seems to be something wrong with the create user wizard?I am using hashed password storage. When I change it to clear storage I see the user's password is being stored as something completly different than what they typed in.Example: changeme1 now equates to something like: 4W*KQQ4%=SIf I use 4W*KQQ4%=S as the password to login with it works but changeme1 does not.When I use the reset password wizard it updates the password just fine and it works when I login next.Any clues what could be causing this?
View 1 RepliesI changed a text field to a template field assigning the selected text and the selected value is being assigned to another currency field also templated. I get aa error
[FormatException: Input string was not in a correct format.]
In the following code, the user documents types are not getting updated, they do initially but don't stay updated. perhaps you can see something blatant here:
<Columns>
<asp:BoundField DataField="DocumentType"
HeaderText="Customer Document Types"
SortExpression="DocumentType" />
<asp:ButtonField CommandName="Delete" Text="Delete" />
[Code]....
I have a page with an updatepanel, which at runtime has controls dynamically created. The controls are saved within the cache, and readded to the page upon postback each time when needed. Sometimes the controls need to change, sometimes not. In most of my cases, if I just re-add the control to the page without any changes to the control AJAX will leave the control alone on the client-side leaving me with what I expect to see, which is no change. If I make a change, it obviously updates correctly.
Now, I have added a literal control which defines an iFrame which points to another page. ie:
Code:
.LiteralControl.Text = "<iframe name='" & .LiteralControl.ID & "' id='" & .LiteralControl.ClientID & "' frameborder='no' scrolling='auto' height='" & _
.ItemHeight & "px' width='" & .ItemWidth & "px' src='" & "WBRender.aspx?ViewID=" & strUniqueID.ToString & "' style='position: absolute; " & _
"left:" & .ItemLeft & "px; top:" & .ItemTop & "px;'></iframe>"
If I re-add this control on postback, with a change, I get the item on the page as I expect. If I make no changes to the .Text and simply re-add the control to the page, it flashes as though it has been changed and then re-requests the page defined by the src. The whole point of me caching this, is to stop the client-side from updating a control that has not changed, removing a flashing screen and all the resizing that goes with it.
I'm using a GridView to retrieve data from a stored procedure using a SQLDataSource (db is SQL Server 2008). When I compile my application and go to my website, all the data is loaded and shown fine. If I was to add a new entry to the table however (a seperate page on my website has a Wizard control to facilitate this) and then return to the page with the GridView, the new entry doesn't show up.
Looking from SQL Server, the data has been added, but the GridView isn't updating to show it. If I were to recompile the project with F6 and refresh the page, the new data will show up. I tried calling DataBind() on the GridView in the Page Load event, however the issue still remains.
I've created a page called "EditItem.aspx" where a user can edit a row in a database. On EditItem.aspx.cs, the pageload function grabs the correct row from the database (by grabbing the querystring in the url). The form is populated with all of the correct data. I've got a button onclick that runs this code:
[Code]....
But the changes do not apply. However, if I set static information (so the information is not being grabbed from fields on the form) into the SQL string, I can click the button once, nothing will happen, but if I press it a second time, THEN the information will be passed to the database.
I have a GridView in ASP.NET. I have an Edit CommandButton for every line in the GridView to edit the data on that line. All of this works fine except for the fact that when the user clicks on Update, it does not update with the correct value that the user entered. I have this as a Template field with the textbox to edit bound to the field, so it updates when the user changed the value and clicks Update. However it does not work. I have tried almost everything and its very frustrating. Here is the code for the Data Source:
<asp:SqlDataSource ID="Table1DataSource" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString2 %>"
InsertCommand="INSERT INTO TABLE1(ProjectId, WBS, WBSTitle, VersionId) VALUES (@ProjectId, @WBS, @WBSTitle, @VersionId)"
DeleteCommand="DELETE FROM TABLE1
[code]...
I have a grid view which uses a Datasource to populate it. There is also a OnRowDataBound method which does lots of work using templatefields etc.I have a button which runs a delete method in the code behind, but when i use it the row i delete is still displayed on postback. I tried to set EnableViewState to false for the grid view, but then parts of the OnRowDataBound method failed where a variable set in the Page_Load is used.
View 3 Repliesi am implementing a update query module.i am displaying all fields from a table for a term searched. well now i am implementing update option for the record which are displayed, i have like 70 columns in my table, and i want to know how to restrict some selected fields to be only read only while the form can be updated ?Like if user select to update a record then some selected field such as "Timestamp, UID etc some selected fields" remains READ ONLY !
View 1 RepliesI have a DataGrid with a TemplateColumn containing an asp:DropDownList and a BoundColumn. I'd like to have a VB.NET handler for when the selected item in the DropDownList changes. I'd like this handler to also update the value in the BoundColumn with the value of the newly selected item in the DropDownList.
Can someone point me to some resources I can examine to learn how to do this?
If the handler for the selection changing can give me the value of the NEWLY selected item, it should just be a matter of accessing the cell for my BoundColumn in the same row and writing to it. I do not know the syntax to achieve this.
I really hope I'm missing something, but I cannot for the life of me figure out a simple way to do the following: I have a database with a list of Ids, Names, and a bit field representing a boolean. Example:
Id | Name | Active
21 BoB 1
43 Ron 0
23 Tom 1
All I want is to list the names on my webpage, with check boxes beside them, and when I click the checkbox the database automatically changes the status... that's it. A checkedlistbox control would be amazing, but it doesn't seem to exist in web form. The problem with checkboxes is asp:checkbox doesn't have a "value" field anymore. So when I'm handling CheckedChanged event, I have no way of knowing what the Id of the changed entry is. I have seen a couple things online that require searching through control hierarchies to find some Id somewhere in your dataset, but that does not make sense.There MUST be a way to do something like this:
[Code]....
At this point I think it's easier to use 2 list boxes, 1 that lists people where Active=0 and one that lists people where Active=1 and then an OnSelect event that moves them between each other. That's how easy checkboxes SHOULD be.
I have a table named RECIPE which is linked to an other table name RECIPE_STATUS
In RECIPE table I have a field named Status_Id which contains the name of the Status which is fetch from the RECIPE_STATUS table based on this ID.
The RECIPE table sample information are as follow :
ID Name Status_Id
====================
1 Test1 0
2 Test2 1
3 Test3 2
The RECIPE_STATUS entries are as follow:
ID Name
========
0 Locked
1 Running
2 Free
From an ASP.net page I would like that my user is capable of changing the RECIPE_STATUS from a given recipe. For that I have a DataGrid which is bind to the RECIPE table.
But then what I would like is that the STATUS shown to my user to be the name Locked,Running or free depedning on the Id
How can I bound in my Datagrid the Recipe.Status to be bind to RECIPE_STATUS.Id ?
IN addition to that, If my user change the status for a given recipe, it should be properly save.
here my code-
<asp:BoundField DataField="DayOfTheWeek" HeaderText="Day" ItemStyle-CssClass="Itemstyle"/>
from my collection entity I am getting DayOfTheWeek like 1,2...7. 1 for monday , 2 for tuesday like that. Where should I place condition so that in grid view it would display day name rather than corresponding code.
I have to set maximum length for bound field in an editable gridview. For this i have used data format string property and also given ApplyFormatInEditMode="true" still it accepts invalid input. The gridview does not have template field, it contains bound fields only. I have written OnRowEditing and RowUpdating events. The dataformat string is DataFormatString="{0:N0}" but it accepts '2352345234523454352345' input also and displays server error while updating in database. I want to spcify maximum length for the textboxes generated dynamically when Edit button is clicked.
View 2 RepliesI have a gridview that displays the results of a SELECT * from a SqlDataSource. Works great. However one of the fields is a Unique ID linking to another table.
Instead of displaying this Unique ID I would like to do a seperate SQL query like, SELECT name from CONTACTS where UID=UID, and display the name of the item that has the matching Unique ID in the boundField, or another field.
I just can't figure out how to approach this, but this is what I want, would be I have a database-table containing an XML-field. Using LinqToSql I succesfully bound this table to a GridView and a DetailsView control.ow I wrote a WebUserControl that renders a bunch of textboxes, and has a method 'Serialize' that returns the XElement-object that I can use in my codebehind to assign it to the LinqToSql-property to save it to database. It also has a public property 'Xml' (type string) that I can use to Bind() the xml-string from the database to it, so the WebUserControl can prefill it's textboxes.
View 1 RepliesI want to add boundfield to the Detailsview control at the run time. The data is coming from the dataset, which is fetching data from SqlDataAdapter. I tried using the following code
string st = "select * from tbrob,tbemp,tbcty,tbcmp where robfircod=" + TextBox1.Text.ToString() + " and robempcod=empcod and robctycod=ctycod and robcmpcod=cmpcod";
I have a details view displaying data from my database. One of the fields is called account growth:
[Code]....
How do I bound a Label to a datasource and its field?I got set up the datasource to a gridview, but don't know how to bind a label to the same datasource.
View 8 ReplieseI am using themes to set the Gridview font size and font name. I need to set the boundfield to the same font and size as I want it to be application to all the columns in gridview. How can I specify the boundfield properties in the themes.
View 8 RepliesI am listing details using a gridview and wish to just display the first 50 characters of a 1000 character field. I feel this should be simple but cannot find the solution.
My current gridview code for this field is simply
<asp:BoundField DataField="BullDetail" HeaderText="Details" />
I want to fix the gridview column width using bound field and also template field using vb.net ... How can i ?
View 1 RepliesI'm hitting a wall trying to format a boundfield of a gridview. I've tried suggestion about setting the htmlencode to false, but that didn't make a difference.The column I am trying to format is:<asp:BoundField DataField="FromDate" HeaderText="Start Date" DataFormatString="{0:MM/dd/yyyy}" HtmlEncode="False" />
View 1 RepliesHow to take value of bound field of grid in a variable or in a textbox.
I m using this code in .aspx page for grid.
[code]....
Now how to take value of cell of grid in textbox or in any varaible on cell click.remember if I take the field as BoundField on aspx.