Displaying Custom Error Pages In Mvc 2.0 On Production Site?
Dec 1, 2010
i have developed a production site in godaddy server.Now i want to display a custom error page if there is any error occurs in the site.i have made following changes in the web.config file ,
<customErrors mode="On" defaultRedirect="/Areas/User/Views/Shared/Error">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="/Areas/User/Views/Shared/Error" />
</customErrors>
But now if error occurs the server will display his default error page for 404 page.Now i want to display my customised error page.Please tell me the entire steps to implement this in asp.net mvc 2.0.i,e is there any coding i have to write in then controllers or in the global.asax.
View 1 Replies
Similar Messages:
Jul 21, 2010
I just recently upgraded a site from 3.5 to 4.0. After editing the web.config, creating a new app Pool in IIS, configuring the site to use 4.0 and the new app Pool, I can no longer browse to any default.aspx page without explicitly typing 'default.aspx'. This site was originally written for .NET 2.0, upgraded to 3.5, and finally updated to 4.0 a few days ago.If I try to browse to http://[mysite]/ I see the following error:
Server Error in '/[mysite]' Application.The resource cannot be found. Description:TTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.Requested URL: /Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1However if I browse to http://mysite/default.aspx, everything works fine.
If I undo all the changes made to the web.config, and revert the site back to the app Pool used for 2.0/3.5 the site loads and runs fine. Restarting IIS will solve the problem for an hour to a day, but the issue will always come back. Other sites running on our sever which were not originally made in 2.0, but 3.5, have upgraded to 4.0 without this issue.
View 6 Replies
Sep 23, 2010
For certain parts of the site the allow inserting and updating of data we have some try / catch logic in place.. Now we would like to display a custom error page explaining what didnt happen. Instead of just a generic message that says error occurred. Here is 1 error that is generated due to Primary Key constraints, we woudl like to redirect them to our error.aspx page which is already setup and configured in the web.config but within that page display a more user friendly detail message of why they got the error. In the example below, we may want to say, "There was an error with the "Access Insert" please make sure that the values you entered on the previous page are unique" thats just an example, but gives an idea of what we are trying to do.
[Code]....
View 4 Replies
Feb 6, 2011
I have two areas: Frontend and Backend - I would like to have two different error pages - so I have two files NotFound in /Areas/Frontend/Views/Shared/NotFound and /Areas/Backend/Views/Shared/NotFound. I have added also to Web.config in area Frontend:
<customErrors mode="On" defaultRedirect="Error">
<error statusCode="403" redirect="NoAccess" />
<error statusCode="404" redirect="/Areas/Frontend/Views/Shared/NotFound" />
</customErrors>
and in area Backend in Web.config:
<customErrors mode="On" defaultRedirect="Error">
<error statusCode="403" redirect="NoAccess" />
<error statusCode="404" redirect="/Areas/Backend/Views/Shared/NotFound" />
</customErrors>
But when I come in bad website url - for example: http://localhost/Backend/blablabla I don't see my NotFound website but:
Server Error in '/' Application.
The resource cannot be found.
Description:
HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /Backend/blablabla
View 3 Replies
Nov 5, 2010
I'm using the old 404-rewrite method on a certain site that is tied to IIS6 *. So if I enter [URL] it calls my error page like so [URL]
Except if I call the page with a fragment, like [URL] I get the same result as above. I can't find the fragment anywhere:
Request.Url
Request.Url.OriginalString
Request.UrlReferrer
Request.RawUrl
headers, server variables, etc
This has come up because I want to resolve paths created by AJAX to their server-side versions. Is there any way for me to retrieve the original path from my handler?
View 1 Replies
Jan 27, 2011
Can anyone send me proper configuration settings in web.config for ASP.NET 4.0. I am unable to redirect pages to desired url on page not found. It seems there are changes in properties as compared to previous framework.
View 2 Replies
Feb 9, 2010
I have an aspx page with lots of controls on it. I am using a custom validator control (with the serverside validation). Is there a way to display the error message on the validation summary without writing Javasccript. I am a beginner in .NET and am not fluent in Javascript. This is the custom validator HTML
<asp:CustomValidator ID="CustomValidator1" runat="server" ErrorMessage="Invalid Date"
ControlToValidate="txtDate" OnServerValidate="ValidateDate_ServerValidate" ValidationGroup="vgSetUp"
></asp:CustomValidator>
This is the utility method am trying to validate for the entry on the UI, so that it takes dates only in these described formats If the user enters date in any other format, this method returns returns the Datetime.Mivalue(1/1/0001)
public DateTime GetFomattedDate(string dateString)
{
try
{
string[] formats = {
"MMddyyyy", // These are the accepted date formats for the UI
"MM/dd/yyyy",
"M/d/yyyy",
"yyyy/MM/dd",
"yyyy/M/d"
};
DateTime EffDate = DateTime.MinValue;
if ( DateTime.TryParseExact(dateString,formats, null, System.Globalization.DateTimeStyles.None, out EffDate))
{
return EffDate;
}
}
catch (Exception)
{
throw;
}
return DateTime.MinValue;
}
This is my customvalidator event handler(code behind)
protected void ValidateDate_ServerValidate(object source,servervalidate eventargs args)
{
args.IsValid = GetFomattedDate(args.Value) ==DateTime.MinValue? false:true;
}
I am able to validate it properly, but I cannot display the error message in the validation summary along with other messages. Anyone who is expert on Javascript can Help with the javascript function?
View 5 Replies
Jan 29, 2011
I picked up a new-to-me client who had a site built in ASP.net (which I do not host).I converted the site to PHP, which worked fine.I want to set up redirects for all the pages he had in the old site (it was a small site, so there was only 8 pages).As an example, the ASP.net url for the Contact page was www.domain.com/Contact - it is now www.domain.com/Contact.php (and so on).
For 301 redirects from one PHP page to another I normally use the .htaccess file:
Options +FollowSymlinks
RewriteEngine on
#custom redirects
rewriterule OldPage.php http://www.domain.com/NewPage.php [R=301,L]
#end custom redirects
What can I do to redirect these ASP.net pages to the new PHP pages?They are all static pages with no dynamic content.
View 1 Replies
Oct 6, 2010
I'm working on a website with legacy Classic ASP pages (being converted to ASP.NET on an as needed basis) and new ASP.NET pages. Use of IIS 7 Integrated Pipeline has been very helpful with our configuration. For example, we were able to get forms authentication working auto-magically with the classic ASP pages simply by configuring the appropriate sections of the web.config file (i.e. no changes were required to the Classic ASP pages, for more info see this).
A colleague of mine believes that custom error pages, as specified in the web.config <customErrors> section, should also be auto-magically applied to the classic ASP pages, but for our website it only works for the ASP.NET pages. Nor have I been able to find any information describing the capability of applying custom error pages to Classic ASP with the IIS 7 integrated pipeline. Is it possible to apply custom error pages to Classic ASP pages per a web.config for an website running under IIS7 with integrated pipeline? If so, how?
View 1 Replies
Oct 22, 2010
i have uploaded my site [URL] it it working properly on local machine but when i uploaded on server i am facing 1 error on button clik of any form. there are two ages career and contact whenever i submit this data by clicking button i get this error. Server Error in '/' Application. Runtime Error Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
[Code]....
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
[Code]....
View 3 Replies
Mar 1, 2010
Is it already possible to run a ASP.NET MVC 2.0 / NET 4 web site in production and later on the 12 of April to replace it with the final versions? I notice that the Microsoft Web Plataform Instalar includes NET Beta 2 ... Not Net 4 RC.
And it does not include MVC 2 RC ...
View 2 Replies
Dec 17, 2010
we cannot login to one of our asp.net production website. Once login ID and password are entered on the login page, the site just stays on the login page without giving any errors whatsoever and without opening the default page.
View 3 Replies
Dec 3, 2010
I've setup an ASP.NET MVC 2 site several times on our test system on IIS 6. I'm fine with having to use the .aspx extension on controllers. The Global.asax.cs file looks like this:
public static void RegisterRoutes(RouteCollection routes)
{
routes.IgnoreRoute("{resource}.html/{*pathInfo}");
[code]...
View 2 Replies
Sep 23, 2010
Crystal Reports Toolbar Images not displaying in the production server.
View 3 Replies
Jan 20, 2011
Previously, I've only used Microsoft-centric solutions, but for an upcoming ASP.Net project I'm considering using Mono and hosting it on a Linux Amazon EC2 instance. Based on the responses to my previous question, this sounds doable. However, I'm most comfortable with VB.Net and I'm wondering how well Mono supports it.
Does anyone have first-hand experience writing ASP.Net applications for Mono using VB.Net? If so, I'd like to know how it went, what kind of compatibility issues you ran into, and if you consider Mono's VB.Net support ready for use on a production site? I know Mono's C#.Net support is very good, so that's my fall-back plan, but I'd really prefer to use VB.Net.
View 4 Replies
Sep 13, 2010
When i'm trying to debug or view pages of my site in browser asp.net dev server doesn't turns on pages automatically and when im trying to go by url it throws me an error See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ComponentModel.Win32Exception (0x80004005): Не удается найти указанный файл
at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at Microsoft.VisualStudio.WebServer.WebServerForm_DAL.DoLaunch()
at Microsoft.VisualStudio.WebServer.WebServerForm_DAL.OnLinkClickedHyperlinkLinkLabel(Object sender, LinkLabelLinkClickedEventArgs e)
at System.Windows.Forms.LinkLabel.OnLinkClicked(LinkLabelLinkClickedEventArgs e)
at System.Windows.Forms.LinkLabel.OnMouseUp(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)............................
View 7 Replies
Apr 12, 2010
I have an application that runs perfectly fine on my local machine. So it was deployed on production server and the site was running (but with some errors). So I corrected the errors and redeployed the application. But the changes are not reflecting! I am using the IIS to host the same. I tried restarting all the services, the IIS itself, the server, cleared the caches...
View 1 Replies
Apr 22, 2010
I am new to webpage building.
I have sucessfully created a .aspx form with submit button feature that publishes correctly in my development environment running localhost. I am now attempting to move this form into my public website and it will not render in the public environment, only returning the code of the form.
View 2 Replies
Oct 27, 2010
I am showing Custom Error in my page.. if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page. Please I am attaching the Screen shot. how to show the Error page on entire page if something happend in any where submaster or other page.. Here is the code that I am using in web config file to show custom Error page..
<customErrors mode="On" defaultRedirect="~/Home/Error">
<error statusCode="403" redirect="~/Home/Error" />
<error statusCode="404" redirect="~/Home/Error" />
</customErrors>
master page I have all the js files and Css files links and I have submaster page for mainmaster page.. sub master page have three tabs each tab has grid control.if something went wrong I can able to show the Custom Error page but its showing me in submaster page.. not in main master page.....but if something hapend any where I need to show CustoM Error page in main master page..
View 1 Replies
Apr 12, 2010
I have a hosted site and just added some additional error notification to my global.asax file and works like a charm. I decided to add the same logic to our test server and it doesnt work. The server.transfer never happens and the email never gets updated. Now i know the email works on the test and production server since we have other pages that use the same SMTP server name and setup as i have in the global file. Below is my code as it is in the file now. I setup a test page to cause an error and the page displays the detailed error which we dont want. But i would like to be notified if this happens. What am i missing? I can only assume that its a IIS confige issue, since the exact same code works on a hosted site, but not at work on our test or production servers. Here is the code i have in the global.asax
[Code]....
View 18 Replies
Apr 9, 2010
I have Created a custom CheckboxList as [Code]....
but when i am passing this cutom control another page via parameter to newxt page i am not able get the selected checkbox
View 5 Replies
May 19, 2013
I have read your article from aspsnippets.com about custom paging it really work, but there are a problem that if there are more record in database (2000 to 5000) than number of page index will be goes in large number. like 1 to 200, any way which can divide it like 12345678910...2000.
View 1 Replies
Jan 11, 2011
I am working on the migration of the server. Our new server is Windows server 2008 with IIS7.0 I have a great difficulty in browsing the pages hosted in virtual directories. I have followed the proper steps of creating a virtual directories and converting them into applications. But when i try to browsing the pages of the virtual directory, i get the 404 error. Note: The .Net Framework 4.0 is installed on the server and the web applications which i am trying to configure in the virtual directories are developed in Visual Studio 3.0. Even the http://localhost also don't work.
View 9 Replies
Jan 21, 2011
I have created my site using ASP.NET Personal Starter Kits 3.5. I use Visual Studio 2008 only . .with its built-in SQL Server (2005 Express) ... my database in App_Data is ASPNETDB.MDF ...
I have created some of my tables also ....in ASPNETDB ..
In my local PC the site was running fine ...
But when I publish my site on production server it doesn't work and shows the following error
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
My hosting provider connection string ..
<add name="ConnectionString" connectionString="Data Source=69.16.253.19;Initial Catalog=usa_data;Persist Security Info=True;User Id=user;Password=pass" providerName="System.Data.SqlClient"/>
My hosting provider gave me the connection string to connect to the SQL Server 2005 but it doesn't work...
I don't understand why my site was running fine using the production SQL Server 2005 in my local PC when I include ASPNETDB.MDF file in App_Data in my local pc only ..if I remove file ASPNETDB.MDF from App_Data of my local pc ... the site stops working ...
Can anybody tell em how to fix this ... !! I am very tensed since last 3-4 days
View 1 Replies
Dec 6, 2010
I'm using localReport to print PDF (SQL REPORTVIEWER). It works fine on localhost. When I move the application to Production (64 bits windows 2008) it gives me an error. (see below)
I put the renderedbytes in a Session in USERCONTROL and I do window.open('Program1.aspx')...
In page load of Program1.aspx I try to retrieve the Session variable and process.... I think this statement cause the error "Response.BinaryWrite (...) etc".
It works on my local pc (Vista 32bits)...
[Code]....
Server Error in '/' Application. Object reference not set to an instance of an object. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Code]....
View 2 Replies
