Web Forms :: Displaying Custom Error Page
Sep 23, 2010
For certain parts of the site the allow inserting and updating of data we have some try / catch logic in place.. Now we would like to display a custom error page explaining what didnt happen. Instead of just a generic message that says error occurred. Here is 1 error that is generated due to Primary Key constraints, we woudl like to redirect them to our error.aspx page which is already setup and configured in the web.config but within that page display a more user friendly detail message of why they got the error. In the example below, we may want to say, "There was an error with the "Access Insert" please make sure that the values you entered on the previous page are unique" thats just an example, but gives an idea of what we are trying to do.
[Code]....
View 4 Replies
Similar Messages:
Oct 27, 2010
I am showing Custom Error in my page.. if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page. Please I am attaching the Screen shot. how to show the Error page on entire page if something happend in any where submaster or other page.. Here is the code that I am using in web config file to show custom Error page..
<customErrors mode="On" defaultRedirect="~/Home/Error">
<error statusCode="403" redirect="~/Home/Error" />
<error statusCode="404" redirect="~/Home/Error" />
</customErrors>
master page I have all the js files and Css files links and I have submaster page for mainmaster page.. sub master page have three tabs each tab has grid control.if something went wrong I can able to show the Custom Error page but its showing me in submaster page.. not in main master page.....but if something hapend any where I need to show CustoM Error page in main master page..
View 1 Replies
Feb 9, 2010
I have an aspx page with lots of controls on it. I am using a custom validator control (with the serverside validation). Is there a way to display the error message on the validation summary without writing Javasccript. I am a beginner in .NET and am not fluent in Javascript. This is the custom validator HTML
<asp:CustomValidator ID="CustomValidator1" runat="server" ErrorMessage="Invalid Date"
ControlToValidate="txtDate" OnServerValidate="ValidateDate_ServerValidate" ValidationGroup="vgSetUp"
></asp:CustomValidator>
This is the utility method am trying to validate for the entry on the UI, so that it takes dates only in these described formats If the user enters date in any other format, this method returns returns the Datetime.Mivalue(1/1/0001)
public DateTime GetFomattedDate(string dateString)
{
try
{
string[] formats = {
"MMddyyyy", // These are the accepted date formats for the UI
"MM/dd/yyyy",
"M/d/yyyy",
"yyyy/MM/dd",
"yyyy/M/d"
};
DateTime EffDate = DateTime.MinValue;
if ( DateTime.TryParseExact(dateString,formats, null, System.Globalization.DateTimeStyles.None, out EffDate))
{
return EffDate;
}
}
catch (Exception)
{
throw;
}
return DateTime.MinValue;
}
This is my customvalidator event handler(code behind)
protected void ValidateDate_ServerValidate(object source,servervalidate eventargs args)
{
args.IsValid = GetFomattedDate(args.Value) ==DateTime.MinValue? false:true;
}
I am able to validate it properly, but I cannot display the error message in the validation summary along with other messages. Anyone who is expert on Javascript can Help with the javascript function?
View 5 Replies
Dec 1, 2010
i have developed a production site in godaddy server.Now i want to display a custom error page if there is any error occurs in the site.i have made following changes in the web.config file ,
<customErrors mode="On" defaultRedirect="/Areas/User/Views/Shared/Error">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="/Areas/User/Views/Shared/Error" />
</customErrors>
But now if error occurs the server will display his default error page for 404 page.Now i want to display my customised error page.Please tell me the entire steps to implement this in asp.net mvc 2.0.i,e is there any coding i have to write in then controllers or in the global.asax.
View 1 Replies
May 7, 2015
I want put custom error page in my website so I wrote below code in web.config
<httpErrors errorMode="Custom">
<remove statusCode="404" subStatusCode="-1" />
<error statusCode="404" subStatusCode="-1" prefixLanguageFilePath="" path="error-404.aspx" responseMode="ExecuteURL" />
</httpErrors>
is it correct?
or I should put other code?
View 1 Replies
Feb 7, 2011
I was wondering if someone could point me in the right direction:
How do I generate a custom error page with the error message and get it to mail me that error message?
Is there a good tutorial out there that someone could point me 2.
View 4 Replies
Dec 3, 2010
I set my web.config with a custom error for 404 and 403 response but when I try to navigate my page (not exist page). It displays the default IIS6 404 page instead of my custom page...
[Code]....
View 5 Replies
Mar 7, 2011
I'm having a wicked time trying to redirect the different error scenarios to a custom error page. Basically, I have put some code in Application_Error in global.asax, and done the necessary web.config settings to use Custom Errors.
In global.asax on Application_Error, I stored the Server.GetLastError in Session. The reason I have to store it in Session is because (as far as I know) you lose the exception when using "ResponseRedirect". And the reason I have to use ResponseRedirect is because I am using an UpdatePanel with AJAX calls, and any exception during the AJAX call shows up as a JavaScript error, and doesn't get handled using the custom error page (see this post).
void Application_Error(object sender, EventArgs e){ ////must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { Session["LastException"] = Server.GetLastError(); } else { // (I think this happens when there are compile-time errors) Server.Transfer("~/Oops.aspx"); }}void Session_Start(object sender, EventArgs e){ //must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { //initialize the session (http://forums.asp.net/t/1405077.aspx) Session["LastException"] = ""; }}
View 3 Replies
Jul 2, 2012
I am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.
---------------------------------------------------------------------------------------------------
<sys.web>......<customErrors mode="On" defaultRedirect="~/Error.aspx"></customErrors>...</sys.web>
---------------------------------------------------------------------------------------------------
And even i tried in Global.asax page in Application_Error() method like below
Exception ex = Server.GetLastError();Response.Redirect("~/Error.aspx?errmsg="+ex.message);Server.ClearError();
And in my Error.aspx.cs page i have placed a label and i have written code like this
protected void Page_Load(object sender, EventArgs e) {
Label1.Text=Request["errmsg"];
}
But it is not getting redirected my error page and not displaying anything on it.
View 1 Replies
Oct 28, 2010
I am showing Custom Error in my page.if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page.I am attching the Screen shot.Can any body help me out how to show the Error page on entire page if something happend in any where submaster or other page.Here is the code that I am using in web config file to show custom Error page..
[CODE]...
Here I know the issue what's going on.This issue is occurring because i am using AJAX to partially load the contents of the tabs after the initial page load so the error is occurring AFTER my master page has been loaded.What I need to do is provide a javascript function to handle the error after the ajax call has returned and redirect to the error page.How to write this Javascript and where Do I need to write this?
View 4 Replies
Mar 29, 2010
I am using the exception catching procedure which is the module to track the errors and it write the error description in a log file in the server.I want to display the error details in a common Error page which is having a multi-line textbox from the common function in the module.Is it possible to do that.If possible,How can I do that....
Try
;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;
Catch ex as exception
CreateLogFile(Ex)
End Try
The above description is the error catching portion from the code In the module I have written the CreateLogFile function which write the log file. I want to display the Error Page after writing the log file which should contain the error details....
View 2 Replies
Mar 24, 2010
Here's my Application_OnError event sink in global.asax.vb:
Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Dim fourOhThree As Integer = DirectCast(HttpStatusCode.Forbidden, Integer)
Throw New HttpException(fourOhThree, innerMostException.Message, innerMostException)
End If
End Sub
You'll see that if we've got an innermost Exception of type AccessDeniedException we throw a new HTTPExcpetion with a status code of 403 AKA 'forbidden'
Here's the relevant web.config entry:
<customErrors defaultRedirect="~/Application/ServerError.aspx" mode="On">
<error statusCode="403" redirect="~/Secure/AccessDenied.aspx" />
</customErrors>
So what we're expecting is a redirect to the AccessDenied.aspx page. What we get is a redirect to the ServerError.aspx page.
We've also tried this:
Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Context.Response.StatusCode = DirectCast(HttpStatusCode.Forbidden, Integer)
End If
End Sub
Which unsuprisingly doesn't work either.
View 1 Replies
Feb 18, 2011
i want to display the errors in a seprate page so in catch block i redirected the execption to that page, in all the pages it's working fine, but if get any error in my db retuning datas means, im' getting redirect loop in browers itself not redirecting to the page i needed. how to fix this??
View 5 Replies
Nov 19, 2010
I've a got an Asp.Net site that is using Forms authentication, I've also got custom errors configured in the web.config. One of these is a special error page for 403's (access denied). My question is how do I get Forms authentication to work smarter?
I would like Forms authentication to send users to login page only if they are not authenticated. If they are I want it to defer to the custom error pages that i've defined in the web.config. This seems like something very basic, how can this be achieved?
[code]....
View 1 Replies
Nov 10, 2010
I have developed .net web application. When i change the page name(Which is not exist) in URL, it throws following error msg. I could not redirect the error page for respected error no(401.2..) Through IIS Admin and web config. Could anybody give appropriate solution. It is urgent. Access is denied. Description:
An error occurred while accessing the resources required to serve this request. The server may not be configured for access to the requested URL. Error message 401.2.: You do not have permission to view this directory or page using the credentials you supplied. Version Information: Microsoft .NET Framework Version:1.1.4322.2470; ASP.NET Version:1.1.4322.2470
View 3 Replies
Jan 5, 2010
I have created a custom error page to redirect whenever any error occurs. I made the following changes to the web.config file
<customErrors mode="On">
<error statusCode="403" redirect="~/Error.aspx" />
<error statusCode="404" redirect="~/Error.aspx" />
</customErrors>
Suppose my url is in the following way: http://MyTestSite/Posts/Post1.aspx
If I remove the .aspx at the end manually then it is not displaying my customm error page instead it is dispalying default 404 error page : Page cannot be found.
Also, if I give http://MyTestSite/Posts the same 404 error message is displaying. Even the Application_Error event in global.aspx is unable to handle this error.
How can I redirect these type of cases to my custom error Page? Do I need to make any changes in IIS default errors or can I able to acheive only using web.config?
View 14 Replies
Apr 12, 2010
I am trying to passing Exception info tpa custom error page that I have created, and I'm looking for the best way to do so.I ended up creating a session object on my Global.asax page, and I pass the error data to the session object during the Application_Error event, but it throws it's own exception prior to working.
[Code]....
I have also updated my web.config with my error page that I would like to pass session object data to:
[Code]....
View 2 Replies
Feb 4, 2011
[URL] Using the above url as a reference, I can see ELMAH should display the Original ASP.NET error page when the error originates from the View. I have created the following view to generate an error, but the only exception views are Raw/Source data in XML or in JSON.
@{
ViewBag.Title = "ViewError";
}
<h2>View Error</h2>
@{
throw new NullReferenceException();
}
Is it possible to view the Original ASP.NET error page in MVC3?
View 2 Replies
Jan 20, 2010
Being A C++ programmer this is fairly new to me - I am working on a formview and have been facing a problem- The issue is simple - I want to display a success page after I insert a row successfully and a custom error page if the insertion fails (due to datatype or format mismatch with table in database).
To achieve this I am doing as follows -
1. Defining a custom error page in ASP.NET configuration tool (webconfig)
>> This page never works if I enter an incorrect format in formview. It would rather display the ugly page with Server Error information (for example) -
The string was not recognized as a valid DateTime. There is a unknown word starting at index 0.
question - Why my default page is not getting displayed? Is it because I am testing from same development machine or is it because the error page doesnt work for "Server Error" pages?
2. In the "iteminserted" event I am redirecting it to Response.Redirect("~/newitemconfirm.aspx")
>> If I do this, irrespective of whether the row insertion was successful or not, this confirmation page always gets displayed! I want it to be displayed only on successful insertion.
View 2 Replies
Apr 22, 2010
I have a problem, its completely i dont why this happening.say i have site its workign most of places.but when i'm check some place its going to custom error pagei'm using url rewriting handler, is it may be?
View 1 Replies
Feb 16, 2010
I need to send a Customized Error page for 503 Errors produced by my asp.net website. I have tried to simulate the condition by switching off the application pool (doesn't work) and by flooding my application with requests. Even though IIS sends me the default 503 error page, and even though I have tried setting a Custom URL in IIS and ASP.NET for this error code, it still returns me the default 503 error page.
View 3 Replies
Jul 6, 2010
I want to show a "Custom error page" when i type a non-existing .aspx or .html page in my application. I had followed the same steps in the link [URL] for the HTML pages also but it is working for .aspx pages but not working for .html pages if I enter any non-existing pages. I had added the path of "aspnet_isapi.dll" for the .html extension in the IIS. I also ensured that the check box "Verify file exists" is unchecked while adding the ".html" entry in the "configuration" of the "Home directory" of the website in the IIS but still it is not working.
View 1 Replies
Mar 29, 2010
I am using a custom error page in IIS 6:<customErrors redirectMode="ResponseRedirect" mode="On" defaultRedirect="Error2.aspx"/>I want to disable authentication for the custom error page because the error being raised is related to an authentication module and I don't want to get into an infinite loop and I want to display a clean error page to the user. I have been trying the following configuration to do that.
<location path="Error2.aspx">
<system.web>
<authentication mode="None"/>
[code]...
View 3 Replies
Sep 9, 2010
I'd like to capture the http referrer url following the rendering of a custom error page.I have this set in my web.config
<customErrors mode="On">
<error statusCode="500" redirect="/StaticError.aspx" />
</customErrors>
In the OnLoad(EventArgs e) event -- I'm trying to do this, but it appears to be too late.this.txtReferrer.Text = Request.UrlReferrer.ToString();Is it possible to capture the referrer url?
View 1 Replies
Jun 18, 2010
Basically I want to take the following:And make it match the styling of the rest of the application.I am creating a custom error page in my C# based project and I want it to be able to show the same information that is displayed in the ASP.NET default error page. From fiddling with reflector I can see that this is generated through HttpException.GetHtmlErrorMessage() but when I try to use this in my exception it returns null.
View 3 Replies
