Can anyone send me proper configuration settings in web.config for ASP.NET 4.0. I am unable to redirect pages to desired url on page not found. It seems there are changes in properties as compared to previous framework.
View 2 RepliesFor some reason the Custom Errors for 404 pages are not working on my production server, but they work fine on development. Instead of going to the custom 404.aspx page, it goes to the ugly IIS 404 page.
Here is my Custom Errors protion of my web.config:
[Code]....
I changed the defaultRedirect to also go to my 404.aspx page just to make sure I was catching everything, but still it does't work. I know I could change the IIS 404 error to also point to my 404.aspx page, but that will not work for me because I need to capture the "aspxerrorpath" in the querystring for .net 404 errors. The IIS method will not give me that.
I am just hoping it is a server configuration I missed somewhere, but everything on production looks the same as on development.
I'm working on a website with legacy Classic ASP pages (being converted to ASP.NET on an as needed basis) and new ASP.NET pages. Use of IIS 7 Integrated Pipeline has been very helpful with our configuration. For example, we were able to get forms authentication working auto-magically with the classic ASP pages simply by configuring the appropriate sections of the web.config file (i.e. no changes were required to the Classic ASP pages, for more info see this).
A colleague of mine believes that custom error pages, as specified in the web.config <customErrors> section, should also be auto-magically applied to the classic ASP pages, but for our website it only works for the ASP.NET pages. Nor have I been able to find any information describing the capability of applying custom error pages to Classic ASP with the IIS 7 integrated pipeline. Is it possible to apply custom error pages to Classic ASP pages per a web.config for an website running under IIS7 with integrated pipeline? If so, how?
I have two areas: Frontend and Backend - I would like to have two different error pages - so I have two files NotFound in /Areas/Frontend/Views/Shared/NotFound and /Areas/Backend/Views/Shared/NotFound. I have added also to Web.config in area Frontend:
<customErrors mode="On" defaultRedirect="Error">
<error statusCode="403" redirect="NoAccess" />
<error statusCode="404" redirect="/Areas/Frontend/Views/Shared/NotFound" />
</customErrors>
and in area Backend in Web.config:
<customErrors mode="On" defaultRedirect="Error">
<error statusCode="403" redirect="NoAccess" />
<error statusCode="404" redirect="/Areas/Backend/Views/Shared/NotFound" />
</customErrors>
But when I come in bad website url - for example: http://localhost/Backend/blablabla I don't see my NotFound website but:
Server Error in '/' Application.
The resource cannot be found.
Description:
HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /Backend/blablabla
I'm using the old 404-rewrite method on a certain site that is tied to IIS6 *. So if I enter [URL] it calls my error page like so [URL]
Except if I call the page with a fragment, like [URL] I get the same result as above. I can't find the fragment anywhere:
Request.Url
Request.Url.OriginalString
Request.UrlReferrer
Request.RawUrl
headers, server variables, etc
This has come up because I want to resolve paths created by AJAX to their server-side versions. Is there any way for me to retrieve the original path from my handler?
i have developed a production site in godaddy server.Now i want to display a custom error page if there is any error occurs in the site.i have made following changes in the web.config file ,
<customErrors mode="On" defaultRedirect="/Areas/User/Views/Shared/Error">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="/Areas/User/Views/Shared/Error" />
</customErrors>
But now if error occurs the server will display his default error page for 404 page.Now i want to display my customised error page.Please tell me the entire steps to implement this in asp.net mvc 2.0.i,e is there any coding i have to write in then controllers or in the global.asax.
in my web application i'm using CultureAndRegionInfoBuilder to Register and UnRegister my custom culture and it is working fine when i run theapplication from VS2008 IDE but not when i deploy to IIS. It's giving the error meesage "Register Method failed
View 1 RepliesI've seen similar posts but have been unable to resolve my error. When browsing the site from IIS I get the following error- a .master file does not exist. I can see it in the directory and everything works fine when running out of VS 2010.
Parser Error
Description:
An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: The file '/AMA.Master' does not exist.
Source Error:
[Code]....
I get the error message The system cannot find the path specified for a .html file that doesn't exist on the server.
1. Is it possible to set up an error page for .html pages that doens't exist without having access to IIS.
2. If you need to do it in IIS, can you do this for .html files, and then set up custom error pages for .aspx files in the web.config so that these rules co-exist.
tried to do a search on this, but it kept timing out on me, so sorry if this has been answered before.In IIS7, I've setup a custom 404 error page, which works if you go to a document, but not if you go to a directory...
View 2 RepliesI have the following in my web.config file:
[Code]....
When I reference a page that does not exist (for example,http://example.com/doesnotexist.aspx) I still get the standard white 404 error page "The resource cannot be found." rather than getting redirected to error404.aspx page that I specified. On unhandled exception, the page does get redirected correctly to error.aspx, just not when it is 404 error. For some reason IIS always pre-empts ASP.NET worker process from processing the 404 errors
I have implemented a custom error page in my asp.net application. In the ASP.net configruation I have
CustomErrors
defaultRedirect="~/ErrorPages/error.aspx"
/>
but when I attempt to cause an error on my application, I still get the generic asp.net error instead of my custom page.
I have a problem with my site, and I'm using .net 4, web form routing
I have this route ,routes.MapPageRoute("JobPreview", "jobs/{jobId}/{pg}/{Position}", "~/default.aspx")
so, this page is working fine
http://www.jobsagents.com/jobs/24651/1/automation-qa-engineer
If we remove the last segment of this url, it should be redirected to the custom 404 not found page, but in the deployment server it redirects to the default IIS error page for 404 errors
http://www.jobsagents.com/jobs/24651/1/, on my local machine it's ok, and shows my custom error page.
If we remove the last three segments of the url
http://www.jobsagents.com/jobs it works fine on the deployment server.
I'm still trying to learn how all of this works, and I apologize if this is a simple fix, but I'm getting frustrated and I could use some help.
I found an XML profile provider that I'm trying to use, and when I set it up, it works fine on my local machine. However when I upload it to the server, I get an error and I don't really know what it means:
Server Error in '/' Application.
Configuration Error
Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: CustomProviders.XmlProfileProvider..ctor()
Source Error:
[Code]....
Source File: E:kundenhomepages28d241331304web.config Line:
38
The full profile section from the web.config file is:
<profile enabled="true" defaultProvider="XmlProfileProvider">
<providers>
<clear/>
<add applicationName="FamilySite" name="XmlProfileProvider" type="CustomProviders.XmlProfileProvider"/>
</providers>
<properties>
<add name="FirstName" />
<add name="LastName" />
<add name="HomeTown" />
<add name="ShowEmail" type="System.Boolean"/>
</properties>
</profile>
If I create a custom error page in my web.config file, how do I retrieve error details in the error page?
So with ...
<customErrors mode="On" defaultRedirect="/error/error.aspx">
<error statusCode="404" redirect="/error/404.aspx" />
</customErrors>
I am referring to errors generated by my asp.net. For example I created a sample page and wrote 'throw new Exception("some error")' as a test. How can I retrieve an instance of the exception or exception details in my "/error/error.aspx" page? Currently in my error page if I query Server.GetLastError() the return value is null.
How to show page Error msgs wen user tries to open the page , while tat page is under uploading on the sever?
View 1 RepliesI have a problem, its completely i dont why this happening.say i have site its workign most of places.but when i'm check some place its going to custom error pagei'm using url rewriting handler, is it may be?
View 1 RepliesHow can we add titles to each content pages which inherits from mater pages in asp.net?
View 1 RepliesPage B - loads slowly and needs to do some CPU-intensive operations on the web server.
I noticed that when someone is loading Page B, then Page A also loads slowly. This is even worse if multiple users are loading Page B at the same time. Page A won't finish loading until Page B is done.
Is there a best practice for making sure that Page A can still load quickly? Maybe a config setting or IIS setting that I need to change from its default? With 2 users loading Page B at the same time, the web server CPU usage only gets to 30% so I suspect it might be something I can tweak with the settings.
When i'm trying to debug or view pages of my site in browser asp.net dev server doesn't turns on pages automatically and when im trying to go by url it throws me an error See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ComponentModel.Win32Exception (0x80004005): Не удается найти указанный файл
at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start()
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at Microsoft.VisualStudio.WebServer.WebServerForm_DAL.DoLaunch()
at Microsoft.VisualStudio.WebServer.WebServerForm_DAL.OnLinkClickedHyperlinkLinkLabel(Object sender, LinkLabelLinkClickedEventArgs e)
at System.Windows.Forms.LinkLabel.OnLinkClicked(LinkLabelLinkClickedEventArgs e)
at System.Windows.Forms.LinkLabel.OnMouseUp(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)............................
I have Created a custom CheckboxList as [Code]....
but when i am passing this cutom control another page via parameter to newxt page i am not able get the selected checkbox
I have read your article from aspsnippets.com about custom paging it really work, but there are a problem that if there are more record in database (2000 to 5000) than number of page index will be goes in large number. like 1 to 200, any way which can divide it like 12345678910...2000.
View 1 RepliesWe have created a new cname for our subdomain website. The new website is working properly with cname. We do have .net application inside the webiste which is not working with cname. For eg,1. http://servername/_folder1/app/mypage.aspx (Accessing .net application (App) website without cname)2. http://NewDomian.xxxx/app/mypage.aspx (Accessing .net application (App) website with cname)The first case is working perfectly, but when I access the second url, I got the following error.Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.Source Error:
[Code]....
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....