Encoding Mailmessage / Showing Characters?
Jan 15, 2010I have problems with encoding when sending mail using mailmessage object. it shows characters: ????
here is code:
[Code]....
Similar Messages:
VB.Net MailMessage Text Encoding?
Mar 8, 2010I have an ASP.Net app that allows a user to write text into a Telerik RadEditor control and then send an email.
For some reason I'm sometimes getting strange characters showing up in the email that is generated.
For example if I put the word Test's into the RadEditor box and send it... the email shows up with the text changed to: Test’s.
It seems as though the ' character was used in place of ' because if I use the later, the text would show up just fine. If I pull up the saved record within the ASP.Net apps interface it looks just fine. It also appears just fine when I view the text within the recorded of the MS SQL table it was stored in.
I'm using MailMessage to create the email. I've check the string being sent at the point just before I use SmtpClient to send the message and it looks just fine at his point. Once the email message shows up however I get the strange text (Test’s).
I'm guessing that I have an encode/decoding issue but I'm not sure how I would go about fixing this.
Continued--->
I have tried to add it to the constructor of my email class with/without mybase but that had no effect.
Public Sub New(ByVal EmailDate As DateTime, ByVal LogoPath As String)
MyBase.New()
MyBase.BodyEncoding = Encoding.GetEncoding("iso-8859-1")
'BodyEncoding = Encoding.GetEncoding("iso-8859-1")
Me.EmailDate = EmailDate
Me.LogoPath = LogoPath
End Sub
I also tried adding it to the code behind of the form that calls the email class just before I create a new SmtpClient but that did not seem to be correct either.
Try
returnEmail.BodyEncoding = Encoding.GetEncoding("iso-8859-1")
Dim smtpCli As New SmtpClient
smtpCli.Send(returnEmail)
Catch ex As Exception
ScriptManager.RegisterStartupScript(Me, Me.GetType, "smtpError", "alert('There was an error sending the email:
* " & ex.Message & "');", True)
End Try
Webmailer Encoding Characters / Set The Content Encoding Of The Whole Page?
Jan 4, 2010I have written a web mailer that can send and receive emails and display them on a webpage.I have a problem displaying special characters though. Like Russian, and Greek and chinese.I am using openpop.net and I can get the encoding of the incoming email as one of my variables.Thing is, how do I display it? Do I set the content encoding of the whole page to what that specific email encoding is?I've got it UTF-8 at the moment and I get garbage.
View 3 RepliesUse System.Net.MailMessage To Dynamically Send Emails, Why Aren't You Required To Specify Any Encoding
Oct 17, 2010In my vague understanding, any texts are transferred over the internet as streams of bytes. And when you change texts to and from bytes, you need encoding. MailMessage.Body is just a plain string(text) and it gets sent over the internet as emails. Why is it that it can correctly display Chinese characters without even having to specify the encoding?
View 1 RepliesC# - QueryString Encoding Of Non-ANSI Characters?
May 27, 2010I'm passing "Malmö" as a Request.QueryString parameter to a page. However, the code sees it as "Malm�" meaning that string comparison fails. All globalization settings are set to UTF-8 in web.config. Am I missing something?
Edit: The querystring looks like this http://localhost/PageName/?courseKommun=Malm%F6
Reading Characters From An Unknown Character Encoding?
Feb 17, 2011I have a string that came from an old database of unknown character encoding. I am having trouble encoding/filtering the string to show the correct text.What the data looks like in the database: Marronnière à quatre pansWhat we need the string to show up as: Marronnière à quatre pansSpecifically, I am having trouble parsing the string so I can display the character à (à)This is an asp.Net 2.0 site written in VB using a Sql Server 2005 Database. Not sure if it matters, but data comes from a column with this collation: SQL_Latin1_General_CP1_CI_ASI've tried encoding the string to various encodings in the code to no avail. I've also passed the string (encoded different ways) into a byte array to find a unique byte pattern for the bad characters without success.
View 1 RepliesEncoding Special Characters For Outlook HTML Email?
Mar 24, 2010I have an asp.net / C# page which takes a comment, and then emails that comment. Sometimes when the user enters "&" in the comment, the comment is being truncated. So for example if the comment is "test & test" the email only sends out "test ".
I have tried HttpUtility.HtmlEncode - but it looks like the issue is on the outlook side and not on the C# side.
Web Forms :: Framework 4 Automatically Encoding Multilingual Characters?
May 13, 2010Has anyone else encountered a problem with Framework 4 automatically html encoding multilingual characters?I am uploading a spreadsheet with both English and Spanish characters. When I preview it on the page everything looks great however as soon as I attempt to pass it to the stored procedure the non-roman characters are being automatically converted to, what looks like, html encoding.This code worked flawlessly in 3.5 and has not been touched. The only change is that I switched to framework 4 however I haven't seen anything indicating that this would be a problem for me.
View 1 RepliesC# - MailMessage.BodyEncoding And MailMessage.SubjectEncoding Defaults?
Mar 15, 2011Simple question but I can't find the answer anywhere on MSDN...
Looking for the defaults ASP.NET will use for:
MailMessage.BodyEncoding and MailMessage.SubjectEncoding
If you don't set them in code?
Web Forms :: Arabic Characters Not Showing Properly?
Dec 27, 2010I have arabic text recorded in ntext field inside database. The record looks ok in table rows but while retreiving and displaying on web page it shows something like these characters 1.شÙŠءIs there any solution or I am missing anything. I have tried with different meta tags and character sets,
View 1 RepliesMojibake Characters Showing After Exporting Excel
Jul 26, 2012Here are the steps made to replicate the issue.
Steps: 1. Go to the List --> Contact Persons page. 2. Click on the "Export" button to generate .XLS report for the Contact Persons List. 3. Close the .XLS report and navigate to other pages e.g. Contacts List. 4. In the Contacts List, click on "Close" button to REDIRECT back to the "Contact Persons" list page.
Expected: - Page shoud display the Contact Persons List page.
Actual: - A strange page is displayed containing mojibaki characters. See image in this [URL] ....
Here are the codes to generate the excel using an Active report:
private static void PushContentToHttp(ActiveReport report, MemoryStream msData, string fileName, string url)
{
report.Run();
XlsExport xls = new XlsExport();
xls.DisplayGridLines = true;
[Code] .....
Forms Data Controls :: Showing Limited Characters In Grid View?
Sep 15, 2010Is it possible to show only few characters in gridview column. Lets say there are 5 columns in the gridview and one of the field is the description field. assume description field is too long. So What i want is to show that description field value to 50 character limit.
my code is like this:
<asp:BoundField DataField="ProposalDescription" HeaderStyle-CssClass="endTime" HeaderText="Proposal Description" ItemStyle-CssClass="endTime"> <HeaderStyle CssClass="endTime" /> <ItemStyle CssClass="endTime" /> </asp:BoundField>
Now here i want to insert character limit for this datafield. Is it possible ?
MVC :: Encoding Whitespace / Not Encoding The < As A Encode But Into The Form <?
Jan 5, 2010Im pulling out a text field from the database which has and 's in it for line breaks. Which I have left there for pupose of being able to edit the fields later on.
So when i try to display the text I need to replace them which I have done with:
[Code]....
Simple enough. Only when I run the page the source code I get for it is:
<br />
So it seems its not encoding the < as a encode but into the form <
Does anyone know how to stop this happen. Or a method around it?
How To Count Of Characters Entered In Multiline Textbox Till 140 Characters
Dec 13, 2010How to count no. of characters entered in multiline textbox, i wanna enter maximum 140 characters in my multiline textbox using vb.net ...
In short i want textbox to enter limit is only 140 characters ....
i have te following code to do that .... but i wanna implement 140 characters limit in multiline textbox :
<script type="text/javascript">
function Count(x) {
document.getElementById("Label1").innerHTML = document.getElementById("TextBox2").value.length;
}
</script>
<asp:TextBox ID="TextBox2" runat="server" Height="78px"
TextMode="MultiLine" Width="224px" onkeyup="Count(this.id)"
MaxLength="140"></asp:TextBox>
AJAX :: MaskedEditExtender's - Mask Characters Don't Hide Under Typing Characters
Feb 1, 2010I have a problem with MaskedEdit's mask for the code shown below:
[Code]....
When I'm starting to print date in the TextBox, mask moves with characters. Mask characters don't hide under typing characters.
MVC String Formatting C# - By 100 Characters Make 4 Rows Each 25 Characters?
Aug 23, 2010I have a string with 100 characters and it is for me too long in one line. I want to make NewLine after each 25 characters. For example:
Instead: "Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua."
Localization :: International Characters / Application Is Changing The Characters
Jan 5, 2011I have a application that takes a tab delimited text file parses and the inserts the data. Some of the data has international characters. My problem is it appears that my application is changing the characters. For Example the file might contain something lke this Andrlová and is converting it to this Andrlov�
I am passing this into a sproc. The datatypes for my paramater & DB Field is nVarChar(50). If I insert the data directly into my table or if I call my sproc from a query window and pass in some data it works fine, but when my app touches the data it appears to get messed with.
Can Change 'from Address' In MailMessage
May 28, 2010I am try to send mail using my application with attachment, disclaimer text (as attachment) and signature. It is working fine.
But when I use a valid credentials in smtpclient, then the From address is set to NetworkCredential objects 1st param (which is an email address).
See my code snippet.
[Code]....
Web Forms :: Getting Value From Radiobutton For MailMessage?
Feb 23, 2011I'm trying to get a value from a series of radiobuttons to be recognized by the Mail.Body method of system.net.mail MailMessage:
private void btnSend_Click(object sender, System.EventArgs e)
{
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("myhost-mail.myhost.net");
mail.From = new MailAddress(chumley@chum.com);
mail.To.Add(my@chum.com);
mail.Subject = "This is the Subject";
mail.IsBodyHtml = true;
mail.Body = "INFO SUBMITTED FROM: " + email.Text + "<br>" + firstname.Text +
" " + surname.Text + "<br>" + usertype.SelectedItem.Value + "<br>" + uname.Text;
lblStatus.Text = "Sending...";
SmtpServer.Send(mail);
}
radiobutton code on interface:
Contractor:<asp:radiobutton AutoPostBack="false" GroupName="usertype" Checked="false" ID="contractor" Value="contractor" runat="server" />
Supplier:<asp:radiobutton AutoPostBack="false" GroupName="usertype" Checked="false" ID="supplier" Value="supplier" runat="server" />
Both:<asp:radiobutton AutoPostBack="false" GroupName="usertype" Checked="false" ID="both" Value="both" runat="server" />
Compiler Error Message: CS0103: The name 'usertype' does not exist in the current context
Web Forms :: UserControl In MailMessage?
Jan 30, 2011I am trying to make a confirmation email. The mail should contain data about the customers order.Thought the best solution was to reuse the user control from my confirmation page. But how? The following code only generates a url to the control:
SmtpClient client = new SmtpClient();
client.Host = "pasmtp.tele.dk";
client.Port = 25;
[code]...
Check MailMessage Was Delivered In .NET?
Feb 11, 2011Is there a way to check if SmtpClient successfully delivered an email? SmtpClient.Send() does not appear to return anything other than an exception. So if the method completes is it safe to assume the email will be successfully sent to the appropriate email box? My code is below:
MailMessage emailMessage = new MailMessage();
emailMessage.Subject = SubjectText;
emailMessage.IsBodyHtml = IsBodyHtml;
emailMessage.Body = BodyText;
emailMessage.From = new MailAddress(Settings.Default.FromEmail,Settings.Default.FromDisplayName);
//add recipients
foreach (string recipientAddress in RecipientAddresses.Split(new char[{','},StringSplitOptions.RemoveEmptyEntries))
emailMessage.To.Add(recipientAddress);
using (SmtpClient smtpClient = new SmtpClient())
{
smtpClient.Send(emailMessage);
}
Web Forms :: System.Net.Mail.MailMessage From?
Mar 15, 2011I'm having problems with the "From". No matter what i put in, it is always getting filled out with whatever account i'm using to log into the smtp services. Here is the code.. not sure what i'm doing wrong by the examples I've looked at.
[Code]....
I've checked my mFrom property and it has the correct email address i'm trying to send it from.. Is the from just always filled out with the info that the email is sent from
HttpHandlers / Modules :: How To Attach A PDF To MailMessage
Apr 22, 2010I am trying to attach a pdf to a MailMessage, but it is not a file, rather it is a web page.
Allthough the pages respondes the PDF normaly, when I am attatching the IO.Stream to MailMessage, it is only 300B, so it cannot be opened.
This is the code:
[Code]....
Also I tried this one, but failed too:
[Code]....
MailMessage And SMTPClient From Address Conflict?
Jul 13, 2010I am having some problems sending emails (using gmail). I have an application that allows a user to send an email, request info, etc. I want the email "from" address to be from the initiating user. I set up the settings in the web.config for the first time. Previously, I had always set up the info directly in the code. The email is sending just fine. However, the from address shows the user name correctly but the email address in the one in the web.config.ie. "User From Name <web.config from address>". In the code, the MailMessage object shows it correctly ("User From Name <User from address>"), and the SMTPClient From address shows the web.config from address. This is going to be confusing for the recipient of the emails to see the config address with the user name.
I tried removing the From address from the config(leaving the required userIDpw for the email logon, but no difference. I also tried removing the config mail settings completely and putting it back in the code. Still no luck.
How can I get the from address to be the valid email address in resulting email?
Web Forms :: Use MailMessage For Bulk Email Using DataTable?
Mar 17, 2010I know I'm missing something. I'm getting this error when trying to use the script below it. The data I need comes up fine but I don't know how to get it into a loop that works for Bcc. Ideas? If a hard code a single address into bcc it works fine. If I append the body with the datatable records to see if the data is actually there, all the data expected is there.Unable to read data from the transport connection: net_io_connectionclosed.Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.IO.IOException: Unable to read data from the transport connection: net_io_connectionclosed.
public void hthSubscriberMail(string subject, string body)
{
string connectionString;
[code]...