I am try to send mail using my application with attachment, disclaimer text (as attachment) and signature. It is working fine.
But when I use a valid credentials in smtpclient, then the From address is set to NetworkCredential objects 1st param (which is an email address).
See my code snippet.
[Code]....
I am having some problems sending emails (using gmail). I have an application that allows a user to send an email, request info, etc. I want the email "from" address to be from the initiating user. I set up the settings in the web.config for the first time. Previously, I had always set up the info directly in the code. The email is sending just fine. However, the from address shows the user name correctly but the email address in the one in the web.config.ie. "User From Name <web.config from address>". In the code, the MailMessage object shows it correctly ("User From Name <User from address>"), and the SMTPClient From address shows the web.config from address. This is going to be confusing for the recipient of the emails to see the config address with the user name.
I tried removing the From address from the config(leaving the required userIDpw for the email logon, but no difference. I also tried removing the config mail settings completely and putting it back in the code. Still no luck.
How can I get the from address to be the valid email address in resulting email?
Simple question but I can't find the answer anywhere on MSDN...
Looking for the defaults ASP.NET will use for:
MailMessage.BodyEncoding and MailMessage.SubjectEncoding
If you don't set them in code?
i am planning to host my all images from another domain which is cookiless but i dont want to alter my all image locations can i do this without changing image locations ?
View 5 RepliesI was trying to change FROM field with Name and Email address. But When I get email It is comaing like below
My network [URL]
[code]....
I'm trying to use a drop down menu and button to link to a site. You click the selection you want from the drop down list and then click the button which will take you to that section.
I need to know the method that will allow me to change the address of the website.
I use these code in webconfig to sending email to my gmail
<configuration>
<appSettings>
<add key="Host" value="smtp.gmail.com"/>
<add key="EnableSsl" value="true"/>
<add key="UserName" value="neda@gmail.com"/>
<add key="Password" value="xxxxxxxxxxx"/>
<add key="Port" value="587"/>
</appSettings>
<connectionStrings/>
Now I want when users click on button it send email to my other email address i.e support@behtob.com
now how i should change above code?
I host my asp.net application with wcf service on IIS 7 and I want that this location could be possible at adress of my computer in lan, that other in network could get to it..
Now it looks like: http://localhost/wcfAx/Service1.svc
How to do like that : http://192.168.2.33/wcfAx/Service1.svc?
I'm currently trying to figure out enabling my users, once logged in, to change their email address that they have registered. As far as I can see it's only held in the aspnet_Membership table.
The code I have so far is as follows, but it doesn't seem to be doing anything. No errors either so I can't go down that route yet!
[Code]....
I can't work out what's going wrong
I have been searching since some days for the best approach one can have in order to allow an authenticated user to change his/her email address.
This is the code I have but apparently it doesn't work and it doesnt even gives a error. The application seems to ignore it:
Change email address:
<asp:TextBox ID="txtEmail" runat="server"></asp:TextBox>
<asp:TextBox ID="txtPassword" runat="server"></asp:TextBox><br />
<asp:Button ID="changemailbtn" runat="server" Text="Button" />
<asp:Label ID="lblErrors" runat="server" EnableViewState="False"
[Code]....
I have an ASP.Net app that allows a user to write text into a Telerik RadEditor control and then send an email.
For some reason I'm sometimes getting strange characters showing up in the email that is generated.
For example if I put the word Test's into the RadEditor box and send it... the email shows up with the text changed to: Test’s.
It seems as though the ' character was used in place of ' because if I use the later, the text would show up just fine. If I pull up the saved record within the ASP.Net apps interface it looks just fine. It also appears just fine when I view the text within the recorded of the MS SQL table it was stored in.
I'm using MailMessage to create the email. I've check the string being sent at the point just before I use SmtpClient to send the message and it looks just fine at his point. Once the email message shows up however I get the strange text (Test’s).
I'm guessing that I have an encode/decoding issue but I'm not sure how I would go about fixing this.
Continued--->
I have tried to add it to the constructor of my email class with/without mybase but that had no effect.
Public Sub New(ByVal EmailDate As DateTime, ByVal LogoPath As String)
MyBase.New()
MyBase.BodyEncoding = Encoding.GetEncoding("iso-8859-1")
'BodyEncoding = Encoding.GetEncoding("iso-8859-1")
Me.EmailDate = EmailDate
Me.LogoPath = LogoPath
End Sub
I also tried adding it to the code behind of the form that calls the email class just before I create a new SmtpClient but that did not seem to be correct either.
Try
returnEmail.BodyEncoding = Encoding.GetEncoding("iso-8859-1")
Dim smtpCli As New SmtpClient
smtpCli.Send(returnEmail)
Catch ex As Exception
ScriptManager.RegisterStartupScript(Me, Me.GetType, "smtpError", "alert('There was an error sending the email:
* " & ex.Message & "');", True)
End Try
I'm trying to get a value from a series of radiobuttons to be recognized by the Mail.Body method of system.net.mail MailMessage:
private void btnSend_Click(object sender, System.EventArgs e)
{
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("myhost-mail.myhost.net");
mail.From = new MailAddress(chumley@chum.com);
mail.To.Add(my@chum.com);
mail.Subject = "This is the Subject";
mail.IsBodyHtml = true;
mail.Body = "INFO SUBMITTED FROM: " + email.Text + "<br>" + firstname.Text +
" " + surname.Text + "<br>" + usertype.SelectedItem.Value + "<br>" + uname.Text;
lblStatus.Text = "Sending...";
SmtpServer.Send(mail);
}
radiobutton code on interface:
Contractor:<asp:radiobutton AutoPostBack="false" GroupName="usertype" Checked="false" ID="contractor" Value="contractor" runat="server" />
Supplier:<asp:radiobutton AutoPostBack="false" GroupName="usertype" Checked="false" ID="supplier" Value="supplier" runat="server" />
Both:<asp:radiobutton AutoPostBack="false" GroupName="usertype" Checked="false" ID="both" Value="both" runat="server" />
Compiler Error Message: CS0103: The name 'usertype' does not exist in the current context
I am trying to make a confirmation email. The mail should contain data about the customers order.Thought the best solution was to reuse the user control from my confirmation page. But how? The following code only generates a url to the control:
SmtpClient client = new SmtpClient();
client.Host = "pasmtp.tele.dk";
client.Port = 25;
[code]...
Is there a way to check if SmtpClient successfully delivered an email? SmtpClient.Send() does not appear to return anything other than an exception. So if the method completes is it safe to assume the email will be successfully sent to the appropriate email box? My code is below:
MailMessage emailMessage = new MailMessage();
emailMessage.Subject = SubjectText;
emailMessage.IsBodyHtml = IsBodyHtml;
emailMessage.Body = BodyText;
emailMessage.From = new MailAddress(Settings.Default.FromEmail,Settings.Default.FromDisplayName);
//add recipients
foreach (string recipientAddress in RecipientAddresses.Split(new char[{','},StringSplitOptions.RemoveEmptyEntries))
emailMessage.To.Add(recipientAddress);
using (SmtpClient smtpClient = new SmtpClient())
{
smtpClient.Send(emailMessage);
}
I have problems with encoding when sending mail using mailmessage object. it shows characters: ????
here is code:
[Code]....
I'm having problems with the "From". No matter what i put in, it is always getting filled out with whatever account i'm using to log into the smtp services. Here is the code.. not sure what i'm doing wrong by the examples I've looked at.
[Code]....
I've checked my mFrom property and it has the correct email address i'm trying to send it from.. Is the from just always filled out with the info that the email is sent from
I am trying to attach a pdf to a MailMessage, but it is not a file, rather it is a web page.
Allthough the pages respondes the PDF normaly, when I am attatching the IO.Stream to MailMessage, it is only 300B, so it cannot be opened.
This is the code:
[Code]....
Also I tried this one, but failed too:
[Code]....
I know I'm missing something. I'm getting this error when trying to use the script below it. The data I need comes up fine but I don't know how to get it into a loop that works for Bcc. Ideas? If a hard code a single address into bcc it works fine. If I append the body with the datatable records to see if the data is actually there, all the data expected is there.Unable to read data from the transport connection: net_io_connectionclosed.Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.IO.IOException: Unable to read data from the transport connection: net_io_connectionclosed.
public void hthSubscriberMail(string subject, string body)
{
string connectionString;
[code]...
I am trying to send an attachment using MailMessage class.
var attachment = new Attachment(ConfigurationManager.AppSettings["pathToPDFs"] + pdfItem.Value);
mailMessage.Attachments.Add(attachment);
This adds the file as an attachment but when I receive the file on my email the name is
//Inetpub//Path//To//pdf//name.pdf it should be just name.pdf.
Where am I going wrong?
ConfigurationManager.AppSettings["pathToPDFs"] is set as C://Inetpub//Path//To//pdf//
pdfItem.Value is name.pdf
I have 3 issues that I am attempting to resolve in development with using an aspx page to send email (both internal and external).1. Using the ddl.SelectedValue for the To email address doesn't send the email to the person, but will still cc and bcc the hard-coded recipients. If I replace the(DropListVendor.SelectedValue.Trim()) withmyemail@chuckanddons.com it sends just fine. However I need my users to be able to select which vendor to email, hence the Drop Down list for Vendor. I'll post my code below.
View 3 Repliesi am trying to send emails using SMTP MailMessage but i have a problems, i got the following error: Failed to send to pm@[URL] (530 5.7.0 Must issue a STARTTLS command first. g31sm24378313ibh.22 ) my code is the following:
[Code]....
i am using google apps for my webmail.
How will we get failure msg when email is not send to sender address...
View 1 RepliesI have managed to expose the MEX endpoint of my WCF service and I can access it with the address like [URL] (example) and get the WDSL. So no problem there.
However, my WCF test page shows the address wrongly by using the server's name instead of the DNS name. And if I click on the link on the test page it won't work (can't get WSDL).
The WCF test page looks like this:
MyService Service
You have created a service.
To test this service, you will need to create a client and use it to call the service.
[URL]
The WCF service is hosted in IIS6. I would like to have a test page with the correct WSDL address so users can see the WSDL quickly in the browser just by clicking on the WSDL address.
In short: How can I change the MyServerName to inter.mycompany.com on the WCF test page? Can this be specified somewhere in the Web.config?
I am trying to pull entries from a database based on the current users IP Address. Here is what I have so far:
[Code]....
I am receiving the following error: Cannot find either column "Request" or the user-defined function or aggregate "Request.UserHostAddress.ToString", or the name is ambiguous.
Is it possible to do this? Should I try to access this information another way?
Is it possible to find out the clients IP and possibly MAC address from non IE browsers (i.e. without using ActiveX)? If so, how?
View 1 Replies