[code]....
gives me error: Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.
I could write : <%# Eval("SaveDate") != DBNull.Value ? do magic But I need to do lots of html magic in if statement.
I know I should add # in order to use Eval, but not sure about correct syntax.
I am getting the following error
Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.
but all I am trying to do is inside a ASP.NET REPEATER Control
<% if ( Eval("Message").ToString() == HttpContext.Current.Profile.UserName) %>
<% { %>
<asp:ImageButton runat="server" etc.... />
<% } %>
i have a FormView, it renders fields from a SQLServer database but also much static text specific to the database value I get. I dont know if this can be done in the code behind and put all this in a function . I put it in my formview
<ItemTemplate>
<% If Eval("Feature1") = "Yes" Then %>
<%# Eval("Username") %> A lot of text
<% elseIf Eval("Feature1") = "No" Then %>
<%# Eval("Username") %>
A lot of different text
<% End If %>
</ItemTemplate>
If I do the code above I get error message:
Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control. Can this be done within the formview?
I have a big problem...I have made a page has a Data FormView controland the insert template of this Formview control has DropDownList to allow the user to choose section (SectionsDDList)..and there's also another DropDownList allow the user to choose a teacher (TeachersDDList)...more infothe SectionsDDList get the section list from SqlDataSource control which the "Select Command" of is:"SELECT section_id,section_id FROM sections"the TeachersDDList get the teachers list from another SqlDataSource control which the "Select Command" of is:"SELECT teacher_id,teacher_name FROM teachers WHERE (section_id = @section_id)"finallyI want the TeachersDDList to be filled with teachers according to the selected section from the SectionsDDList...So,I enable the Auto postBack function of the SectionsDDListand add the next code for the SectionsDDList_SelectedIndexChanged event:TeachersDataSource.SelectParameters["section_id"].DefaultValue = ((DropDownList)sender).SelectedValue;be aware that both of the SectionsDDList & TeachersDDList have been Bounding to a column...and the problem I have faced is that:Exception Details: System.InvalidOperationException: Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.maybe you want to know the Stack Trace:[InvalidOperationException: Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.]
System.Web.UI.Page.GetDataItem() +93
System.Web.UI.TemplateControl.Eval(String expression) +33
ASP.cpanel_managecourses_aspx.__DataBinding__control82(Object sender, EventArgs e) in
[code]...
I have four fields on my insert form: Server, Farm, Silo and Reason. Farm and Silo populate based on the name of the server that is entered. If I take out the SelectedValue='<%# Bind("value") %> the form doesn't error out, but the fields don't post back to the DB.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<%@ Page Language="C#" %>
<html dir="ltr" xmlns="http://www.w3.org/1999/xhtml"> runat="server">
<meta content="en-us" http-equiv="Content-Language" />
[code]...
SqlCommand _cmd1 = new SqlCommand("Viewstate2", _cn);
_cmd1.CommandType = CommandType.StoredProcedure;
_cmd1.Parameters.AddWithValue("@behcode", data);
string data1 = Request.QueryString["id"].ToString();
_cmd1.Parameters.AddWithValue("@id", data1);
_cn.Open();
SqlDataReader _dr1 = _cmd1.ExecuteReader();
while (_dr1.Read())
{
lblprice.Text = _dr1["price"].ToString();
Lbldate.Text = System.Convert.ToDateTime(miladitoshamsi(Eval("Date"))).ToString(" yyyy/MM/dd");
In the above code I get the following error
Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.Source Error:
Line 97: lblprice1.Text = _dr1["price1"].ToString();
Line 98: lblprice.Text = _dr1["price"].ToString();
Line 99: Lbldate.Text = System.Convert.ToDateTime(miladitoshamsi(Eval("Date"))).ToString(" yyyy/MM/dd");
I have a repeater I've databound with a generic arraylist from a LINQ query (.ToList() ) in the code behind.
I was using
<%# Bind("FirstName")%> but noticed
<%# Eval("FirstName")%> works just as well.
Is it better to use Eval or Bind? or does it depend on the situation?
Context
I'm putting together a templated, databound control. Presently it works with the following syntax...
<cc:ItemChooserControl ID="ItemChooser" runat="server">
<TitleTemplate>
<h4><%# DataBinder.Eval(Container.DataItem, "DisplayName") %></h4>
</TitleTemplate>
</cc:ItemChooserControl>
Problem
What I would like though is that the shorter, simpler Eval would work instead.
<h4><%# Eval("DisplayName") %></h4>
What I get however when using straight Eval is an error:
Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.
Code
I'm databinding to a custom HtmlTableCell...
public class TitleTemplateTableCell: HtmlTableCell, INamingContainer
{
private object m_DataItem;
public virtual object DataItem
{
get { return m_DataItem; }
set { m_DataItem = value; }
}
}
With the following custom DataBind (non-related code removed)...
foreach (object dataItem in dataSource) {
TitleTemplateTableCell title = new TitleTemplateTableCell();
TitleTemplate.InstantiateIn(title); // TitleTemplate is the template property
title.DataItem = dataItem;
title.DataBind();
}
this is my hyperlink code that is in gridview
<ItemTemplate>
<asp:HyperLink ID="lnkRemove2" runat="server" CssClass="LBP3E" Text = "more..." NavigateUrl='<%# "state/view.aspx?BehCode=" + Request.QueryString["BehCode"] + "&Id=" + Eval("Id") %>'></asp:HyperLink>
</ItemTemplate>
I want do some thing like that for my button control that is not in gridview it is out of grid view...HOw I can do it?
have been using hyperlink field and bind it using eval
NavigateUrl='Test.aspx?cid=<%# Eval("cat_id") %>' but it is not taking eval value.it is showing eval in link
I have a very simple form that contains a FormView Control Bound with a SqlDataSource, The DefaultMode of the FormView control is "Insert". I noticed that when I run the page for the first time, the databinsing and databound events of the FormView Control occurs after the PreRender Event of the page ! I know very well the life cycle of a page, but I dont know when the data binding occurs in the life cycle of a page and if it can differ from a control to another.
Is there an article or a tutorial explaining all those things.
For some reason my DataContext is not showing all the normal methods like SubmitChanges() etc in the intellisense.It also won't compile if I type in db.SubmitChanges();Any idea what I'm doing wrong? Normally I don't have this issue, I have several other projects that work fine...
View 1 Repliesi have an Gridview with BoundFiled, for the bound field headertext alo coming from the table, but i dont know how to bind the headertext and data. i have used below code
<asp:BoundField runat="server" DataField="column1_data" HeaderText = DataBinder.Eval '<%# Bind("column1_text") %>'/>
but getting error as "The BoundField control with a two-way databinding to field column1_text must have an ID."
I have a gridview which I load with data on click of a button. For some reason the paging did not work. The paging number shows up but clicking on page # 2, 3 or 4 does not take you anywhere. the grid just disappears on clicking them. right after that when i click the button to generate the grid, the grid came up this time the gird is on page 2 or 3 instead of 1.
I have the following on page_indexing properly.
Protected Sub GV_Document_Hide_PageIndexChanging(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewPageEventArgs) Handles GV_PSIDocument_Hide.PageIndexChanging
GV_Document_Hide.PageIndex = e.NewPageIndex
End Sub
I even tried by adding the databind() code inside the pageindexchanging as suggested in other threads but that didn't make any difference.
The only way I could get this going was by populating/loading the grid on page_load. I have to assign datasource & databind it every time irrespective of even postbacks. I tried IsNotpostback then the paging failed again Why does gridview needs loading on page_load every time if the paging needs to work properly?
I have a dropdownlist that gets data through entity objects, but with a navigation. But I get an error trying to do this.
<asp:DropDownList ID="ddlVacancy" DataValueField="ID" DataTextField='<%# Eval("Position.Name") %>'
runat="server" Width="200px"/>
This is the code when you take the Login control from the toolbox.
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"> [code]....
Error 1 The name 'UserName' does not exist in the current context
Error 2 The name 'Password' does not exist in the current context
Error 3 'ASP.default_aspx' does not contain a definition for 'Login1_Authenticate' and no extension method 'Login1_Authenticate' accepting a first argument of type 'ASP.default_aspx' could be found (are you missing a using directive or an assembly reference?)
I want to know where lies the difference between these two.I had a google search on this topic and a lots of replies and each of them tell the same thing:
Eval means one way binding(i.e;readonly)
Bind means two way binding(i.e;both read as well as write the datasource)
but none of them explained it more clearly.all i want to know is how can i use the Bind to update/insert something from the datasource?
I have in my code behind the following property
public string Firstname {get;set;}
when I want to bind it to some textbox I do the following:
<asp:TextBox runat="server" ID="txtFirstname" Text='<%# Bind("Firstname") %>'/>
then I want value put in this textbox to be set in my Firstname property (because I want to process it e.g. save this value) in my presenter.
[code]....
I noticed these errors while building my project (Image#1), but wasn't able to fix them until I declared all of them in the Code behind file (Image #2).It worked fine & I cleared all the errors in al the pages in Visual Studio, BUT the code wouldn't work right on the webpage (Image #3).With this block of Web Controls commented out, I get 3782 errors as you can see below (Image #1). When these blocks are Uncommented, that number goes down to 3755 (Image #2) and eventually clears all error messages.Can anyone assist with this annoyance?
[Code]....
[Code]....
Uncommented Code Error Message when you navigate to the page:
I got the difference between Bind and EVal from here. Bind will do both way reading and writing. And Eval do only reading. So any function only for writing?
View 1 RepliesI'm trying to format the following:
<%# Bind("TimeOfDay","{0:HH:mm:ss}") %>
<%# Eval("TimeOfDay","{0:HH:mm:ss}") %>
<%# Bind("TimeOfDay","{0:HH:mm:ss tt}") %>
[code]...
I want to render something like this (with ASP.Net Controls in the codebehind):
<ul>
<li class="first"><h1>This is a caption</h1></li>
<li><a href="#" title="" target="_self">Foo</a></li>
<li><a href="#" title="" target="_self">Foo1</a></li>
<li><a href="#" title="" target="_self">Foo2</a></li>
<li><a href="#" title="" target="_self">Foo3</a></li>
<li><a href="#" title="" target="_self">Foo4</a></li>
</ul>
<ul>
<li class="first"><h1>This is a another caption</h1></li>
<li><a href="#" title="" target="_self">Foo5</a></li>
<li><a href="#" title="" target="_self">Foo6</a></li>
<li><a href="#" title="" target="_self">Foo7</a></li>
<li><a href="#" title="" target="_self">Foo8</a></li>
<li><a href="#" title="" target="_self">Foo9</a></li>
<li><a href="#" title="" target="_self">Foo10</a></li>
<li><a href="#" title="" target="_self">Foo11</a></li>
</ul>
The amount of li elements that will be rendered into each ul is determined at runtime. Each link in a li belongs to into a specific ul (the one containing a specific caption. Imagine this as a kind of a treeview with nodes and subnodes) During the bind Event I need access to an ASP:HyperLink that will be rendered into the a-element. Which databound ASP.Net control should I pick for this? Looks like a repeater in a repeater, which should make the databinding process ugly. I'm thinking about creating this HTML-Output with StringWriters myself.
my link button -
<asp:LinkButton runat="server" ID="lbtnEdit" Text="edit" OnClientClick="javascript:msgDisp('<%# Eval(LocationId).toString() %>')" />
and the javascript msgDisp is-
<script type="text/javascript" language="javascript">
function msgDisp(lid) {
alert(lid);
}
</script>
but it is not giiving LocationId in pop but the whole string <%#......%> is comin in popup message. How can I pass Eval values in javascript.
im building a simple message messenger web application, i currently have a column in my database dedicated to the status of a message. Its bound to the third column in a datagrid.
After converting the column to a TemplateField and using a Label to fetch the data how do i change the text from the database to a small message, e.g. if the data in the database (as an interger) is 0. how do i change the interger to a string to display "UnRead". Do i need to do this during the databinding call or after the grid has been databound?
I know it would be easier to use a boolean and checkbox control but the interger column represents more values than true or false.
Recently I was asked the following question at interview."What are the different way to bind a Data Control in ASP.Net".
I have answered
Typed DataSet
Collections
Stored Procedure.
The interviewer expecting a lot more. Can anyone explain me the different way that we can bind the data controls?