Only from today I faceed this problem. Can anybody tell me whats the problem?I paste the evntviwer message below:aspnet_wp.exe (PID: 1160) was recycled because memory consumption exceeded the 608 MB (60 percent of available RAM).
View 1 RepliesTo guarantee optimal performance, aspnet_isapi uses asynchronous named pipes to forward requests to the worker process and to get responses. On the other hand, the worker process exploits synchronous pipes when it needs to query for information about the IIS environment (that is, server variables).
Does the worker process always uses "synchronous" named pipes? (Response to aspnet_isapi.dll would be asynchronous too, right?) Can the worker process talk directly to IIS or does it have to send a synchronous request to aspnet_isapi.dll to inquire about IIS environment etc.?
I am not able to attach the aspnet_wp.exe process sometimes.
I have created a virtual directory for my application and i am browsing through that. I have opened my application through file system.
Am i using the wrong order. Should i attach first then browse or browse then attach?
The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request.
Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.i have started getting this error for my application how do i resolve it til yest it was fine
I have developed website using .NET 2.0 and I am trying to host the same on IIS 5.1. It works on my machine where I am domain user with all the administrator rights on my machine. I can access the website from other machine on the network using IP address of my machine in URL
But it fails when I am trying to host on my clients machine. Here is the list of errors I get.
I already tried using
1. iisreset
2. aspnet_iis -i
Here is the list of the errors that I get
[Code]....
I'm trying to debug an ASP.NET application. I've created a virtual directory in IIS, copied all the binaries and web.config there. When I pass request from the client program running on the same computer aspnet_wp.exe is started but then something goes wrong.
I want to attach to the process and try debug it. When I ask Visual Studio to "Attach to process" it displays a list of processes and aspnet_wp.exe, inetinfo.exe and dllhost.exe are all displayed grayed as if they are already debugged by some other program and so I can't attach to any of them.
I have tried to disable the "debug" option in web.config:
<system.web>
<compilation debug="false">
othersettings
</system.web>
but it didn't change the behavior.What's happening and how do I make aspnet_wp, inetinfo and dllhost all start in such way I can attach a debugger to either of them?
I have an asp.net page that's taking longer to render than we'd like. I've been doing some manual Debug.WriteLine type performance testing and I noticed some statements in my output window that look something like:
'aspnet_wp.exe' (Managed (v2.0.50727)): Loaded 'jpgxkjws'
These statements are showing up in my output window when I'm doing "xml stuff" in my code. For instance I see one of these types of statements getting written to my output window when I execute the following line of code (sandwiched between two Debug.WriteLine statements):
System.Diagnostics.Debug.WriteLine("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! In ToXml(), about to call XMLSerializer: " & Now.ToString("hh:mm:ss.ff"))
xmlSerial = New Xml.Serialization.XmlSerializer(Me.GetType, xmlRoot) 'See a "loaded statement when this executes
System.Diagnostics.Debug.WriteLine("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! In ToXml(), finished call XMLSerializer: " & Now.ToString("hh:mm:ss.ff"))
These statements are pretty expensive, averaging about .75 seconds apiece. Any idea what these are and if it's possible to speed them up? Are these just statements just a artifact of my running my site in debug mode?I was initially perplexed that I couldn't find these files anywhere, but I ran procmon while debugging my asp.net site and did find where these files are located, they are located in
C:Documents and SettingsmyhostnameASPNETLocal SettingsTemp
I have a big excel file , and i want to upload it to server.
on upload_click , i have to do a processing which takes very long time,
because i am finding latitude and longitude from the google by reading that excel file.
and i wanted that when used click on CANCEL button the process should stop.
i have created a thread on upload_click and doing all this stuff in that thread .
when user clicks on CANCEL , i am aborting that thread.
but when user again tries to upload file , i am getting the error that file is in use .
to solve this problem i have to stop aspnet_wp.exe from task manager and have to try again .
I have an ASP.Net application that I am developing on my localhost. I have v.2.0.50727 installed and running. I have registered and re-registered this version ASP.Net several times. So far I am having no luck and continually get a "Server Application Unavailable" message. The funny thing is, this only happens on .aspx pages. Additionally I have ensured that the application is set to run ASP.Net 3.5 in VS 2008.
I have no further information to provide as none is being provided to me by the application. To add a wrinkle... on a seperate local machine, everything is working properly. I am fresh out of ideas as to why this isn't working. I have tried pretty much everything else I have researched with no luck. The only error I am seeing in the log is:aspnet_wp.exe (PID: XXXX) stopped unexpectedly.
Error:
Executed as user: MACSTEELUSA.COMsa. ...9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:00:17 PM Error: 2010-06-02 20:00:18.56 Code: 0xC0202009 Source: CRM_ORACLE_ARSUMMARY Connection manager "SourceConnectionOLEDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client
and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2010-06-02 20:00:18.58 Code: 0xC020801C Source: Data Flow Task Source - Query [1] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireCon... The package execution fa... The step failed.
Tasks Taken:Went to this folder checked for tnsnames.ora file but it is in good shape.
C:ORACLEproduct11.2.0client_1
etworkadmin
I have a serious problem with "Error on Page". The error message points to line number 939, char 13. In my code behind (C#) in line number 939 is only an obsolete method found which is no longer called. The aspx file has only 339 lines. What the heck is line number 939?The Webapplication allows a special user group to change some group memberships for members of another user group in Active Directory. The App handles 3internal DataViews derived from corresponding DataTables as DataSource for 3 GridViews and some other internal lists with objects (List<obj>).
It uses windows authentication to get current users credentials and his membership in the "Operators" group. This credentials will be passed-through to allow the process managing group memberships in active directory.After starting the App in browser it seems to work fine. But after an indeterminated time it doesn't longer respond. After each click on buttons (or link buttons) you only can see the message "Error on Page" in the browsers status bar below.I played with session timeout, storing the DataTables in session variables, without success.
Last week I found this article here: [URL]" and I addedEnableEventValidation="false" ViewStateEncryptionMode="Never"
to Page declaration. However, at some point the the server does not respond. Each time the worker process on webserver recycles it seems the application turn to wrong state. Might be important: All controls including GridViews are embedded in an AJAX UpdatePanel. How to get a better error message? Debugging is enabled and Custom Error handling On, Off or Remote Only brings the same result as described.
When a server error occurs for whatever reasons (YSOD), the server will send a message via SMTP class. In my case, my company employs microsoft exchange and uses NTLM authentication for all domain users. I am authenticating users via NTLA windows integrated authentication. My question is, is it possible to utilize this authentication data, and pass it to the system.web SMTP username/password authentication scheme to send an email to me (the web developer) when the error occurs? I am pretty sure my company requires a username/pwd to send emails via SMPT on the ms exchange server.
View 1 RepliesI'm receiving the following error occasionally when calling web service using a .NET 4.0 web application."The underlying connection was closed: An unexpected error occurred on a send."All of the articles I've read regarding this issue are for the Framework 1.1.Is there any solution to this issue for using .NET framework 4.0?
View 1 RepliesI am consuming a third party web service wsdl using my .net aps.net page. And I am getting following error message. Cannt get to resolve it. Its working on my machine but not in my development machine. I have installed the certificate also in certificates on that machine.
Error --> The underlying connection was closed: An unexpected error occurred on a send.
i write a site and get this error, i using VS2010.
An error occurred during local report processing.
The definition of the report 'ModulesReport1.rdlc' is invalid.
An unexpected error occurred in Report Processing.
Could not load file or assembly 'Microsoft.ReportViewer.ProcessingObjectModel, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
i try run on my machine its all work fine, but when i complier and run it on Window server 2008 get this error.
I read [URL] I install the ReportViewer.exe but still cannot find the Microsoft.ReportViewer.ProcessingObjectModel.dll, however I got find it Microsoft.ReportViewer.ProcessingObjectModel in C:Windowsassembly and is not a dll file.
I am REALLY stuck with this and need a solution in the next 24 hours .i I have uploaded my asp.net web application to the web and have the database and connection strings functioning and reading the data from the database. But when I try to write to the DB
I get the following error :
Server Error in '/' Application.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that
SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
The wierd thing about this is the connection strings work from the local machine when I run from Visual Studio and I can write to the DB there, I just cannot write to the DB from the URL.
I am pretty new to asp.net but I am sure it has to be something to do with the web.config.
I have an asp:BulletedList controls with AJAX:PagingBulletedListExtender on my aspx page.
It gives error as: Microsoft JScript runtime error: Sys.ArgumentException: Value must not be null for Controls and Behaviors. Parameter name: element
If I removed, the asp:BulletedList controls and AJAX:PagingBulletedListExtender from my page then page run without any error.
I am not getting the cause of the error.
im working with visualstudio 2005 and sql server 2005 c#,and i tried to insert an items to the sql but it gave me this error
Application server error '/ WebSite6'.
The INSERT statement conflicted with the FOREIGN KEY constraint "FK_StudentToCourse_Students".The conflict occurred in database "TopseaUser", table "dbo.Students", column 'id'.
The statement has been terminated.Description: The exception is unhandled occurred during the implementation of the current web request. the stack trace for more information about the error and where the source code.
Details exception: System.Data.SqlClient.SqlException: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_StudentToCourse_Students". The conflict occurred in database "TopseaUser", table "dbo.Students", column 'id'.The statement has been terminated.
This error: Line 243: sql_comm.Parameters.AddWithValue ("@ studentId", Convert.ToInt32 (id));
Line 244: sql_comm.Parameters.AddWithValue ("@ CourseId", Convert.ToInt32 (ListBox3.Items [j]. Text.ToString
()));
Line 245: sql_comm.ExecuteNonQuery ();
Line 246: split_listbox2 ();
Line 247: sql_conn.Close ();
Source File: c: Documents and Settings Ronen My Documents Visual Studio 2005 WebSites WebSite6 SiteMembers CourseSignUp.aspx.cs line: 245
this it the code :[Code].... !
I have an existing project with a silverlight3 app. First I created SALESservice.svc.This is working fine. Now I added another TARGETservice.svc to my project and rebuilded my entire project but when I am trying to add the service reference in to the silverlight app I get the following error:
There was an error downloading metadata from the address.verify that you have entered a valid address. I didn't write any code in ISALESservice.svc AND ITARGETservice.svc . I have written in SALESservice.svc.cs AND TARGETservice.svc.cs files.Is this causing error? But for SALESservice.svc it is working. I didn't add any code in web.config file.
<%# Eval("NAME").ToString() == "Edit" ? %>
<asp:ImageButton ID="imgEdit" runat="server" ImageUrl="../icons/icoedit.png" CommandName="Edit" CommandArgument='<%# Container.DataItemIndex %>' />
Error: Compiler Error Message: CS1525: Invalid expression term ',
I have got a problem tesing paypal sandbox IPN. i have got this error message: IPN delivery failed. HTTP error code 500: Internal Server Error
I could not find out what this error means.
I'm having a wicked time trying to redirect the different error scenarios to a custom error page. Basically, I have put some code in Application_Error in global.asax, and done the necessary web.config settings to use Custom Errors.
In global.asax on Application_Error, I stored the Server.GetLastError in Session. The reason I have to store it in Session is because (as far as I know) you lose the exception when using "ResponseRedirect". And the reason I have to use ResponseRedirect is because I am using an UpdatePanel with AJAX calls, and any exception during the AJAX call shows up as a JavaScript error, and doesn't get handled using the custom error page (see this post).
void Application_Error(object sender, EventArgs e){ ////must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { Session["LastException"] = Server.GetLastError(); } else { // (I think this happens when there are compile-time errors) Server.Transfer("~/Oops.aspx"); }}void Session_Start(object sender, EventArgs e){ //must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { //initialize the session (http://forums.asp.net/t/1405077.aspx) Session["LastException"] = ""; }}
I have uploaded all files to my server. and while im checking the site it shows the following error." Server Error in '/' Application. Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster,ensure that <machineKey> configuration specifies the same validationKey"what i have to do/how to fix it.
View 3 RepliesA network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
when i upload my site on webserver and connect with remote sqlserver2005 using connection string....
<connectionStrings>
<remove name="ConnectionString"/>
<add name="ConnectionString" connectionString="Data Source=69.16.253.19,1433;Initial [code]...
it shows an error above ..i m using aspnetdb.mdf in my website in APP_Data Folder... features i use in my website is Login Control, Password recovery, signup control...
I have written some vb code that inserts whatever has been written on my page into an Access database. Only problem is VWD throws up an error saying that the syntax of my SQL statement is wrong. I am 95% sure that this statement is correct because when I saw the statement in Text Visualizer and tried that statement in MYSQL the data went in perfectly.
I have pasted the code below:
strSQL = "INSERT INTO User (UserID, FirstName, LastName, Password) VALUES "