i am trying to generate a pdf file using itextsharp in asp.net c#.
I came across table concept in itextsharp n i am trying to use it ie my application. I am having the following problem while using tables.The pdf cell which contains Name of treasery the word treasery comes on next line. I am setting width for each cell. if i increase the width than also no changes come. The gap which is shown using arrow in below image remain as it is al the time. Why is that gap?How to remove that gap?I want a dotted line as a border to only one cell. how to do that?here is my code
PdfPTable line6table = new PdfPTable (3);
float[] width = new float[] { 2.5F, 1.5F, 3.0F };
line6table.SetWidths(width);[code]....
I am trying to add an image to the top of every page on an existing PDF. I have tried using PdfStamp but for some reason when I try to print the pdf from Chrome all I get is a black page. Also Adobe Reader only shows the original document. Does anyone have any ideas on how to get it working? Here is the code.
public partial class MakePdf : System.Web.UI.Page { public MemoryStream m = new MemoryStream(); protected void Page_Load(object sender, EventArgs e) { Document document = new Document(PageSize.LETTER); Response.ContentType = "application/pdf"; string RESULT = @"C:UsersmaitchisonDocumentsPdfService Report Search - 650-10-067 4114.pdf"; PdfReader reader = new PdfReader(RESULT); PdfStamper stamp = new PdfStamper(reader, m); try { // Set ContentType and create an instance of the Writer. Response.ContentType = "application/pdf"; PdfWriter writer = PdfWriter.GetInstance(document, m); writer.CloseStream = false; // Open Document document.Open(); int n = reader.NumberOfPages; int i = 1; PdfContentByte cb = writer.DirectContent; PdfContentByte over; Barcode128 barcode128 = new Barcode128();................
I am looking for code to create a itextsharp pdf file using XML and xslt in an ASP.net application.I was unable find any code from the internet whihc uses xslt transform before converting to pdf.
i'm genarating a pdf using itextsharp.in my gridview there are many feilds(100).i want to increase my page width. Document pdfDoc = new Document(PageSize.A1, 10f, 10f, 10f, 0f);
What I am doing is to generate a pdf booklet from database. I need go generate a content table with page numbers. E.g there are two chapters with page number like:
The text "Chapter 1 ----- " is normal paragraph. But the page number "3" has to be produced using PdfTemplate because it can only be known later. But the pdfTemplate is absolutely positioned. How can I know where to position the PdfTemplate? Am I right on this ? How could I figure this out or should I use other methods?
I am creating an ASP.net website where some articles can be uploaded. I need that my users can get PDF version of it by clicking on a button. For this functionality I am using itextSharp. I am considering the following two options.
1. I will create the PDF file once(on first request) and reuse it always by checking for the existence of it.
2. I will create it on the fly and delete it as soon as the PDF file is delivered to the client. The first approach will lead to faster PDF delivery where as the second approach will lead to saving space.
I am also wondering if this can be possible without saving the PDF on the server in the first place.
I am generating a pdf file in asp.net c# using itextsharp. i am not able to draw a horizontal line/verticle line/dotted line.
i tried to draw a line using the following code,i am getting no errors but the line is also not getting displayed in the pdf file
PdfContentByte cb = wri.DirectContent; cb.SetLineWidth(2.0f); // Make a bit thicker than 1.0 default cb.MoveTo(20, pdfDocument.Top - 40f); cb.LineTo(400, pdfDocument.Top - 40f); cb.Stroke();
What is the problem in the code.Is it because of the position of x y co-ordinates? I had used rough points to know approximate position in pdf,but the line never apears in the pdf file.
The output i am looking out for is as shown in image below.
I wanted to get the page number in each page of the pdf generated using iTextSharp 5.0.2.0.
right now part of the code is
[Code]....
But when i do this , it is showing the page number but the problem is it is showing same page number in all the pages. like "1" in all the pages. how to get the page number for the pdf file using iTextSharp version 5.0.2.0 ?
I use ITextSharp library to convert html to pdf. My users use persian language sentence in her/his html files, So this library can't convert persian word.
For resolve this and right to left problem i use bellow code:
[Code]....
My right to left and convert persian words was resolved, but it have another problem.
My algorithm can't parse and convert content of table tag that uses in html file.
Now the question is: How to parse html file that have table tag, div and paragraph tag with persian language sentence, and convert it to pdf?
I tried to export a grid view to pdf using iTextSharp. When i build the program it does not leave me any exception.But when i tried to run the program and click on "Export to PDF" button, it leaves me with an following exception saying
"Could not load file or assembly 'itextsharp, Version=4.1.2.0, Culture=neutral, PublicKeyToken=8354ae6d2174ddca' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)"
i have a question it comes only one page when i download the file.
how can i download multiple pages with programatically i have create pdf file of one page and my database table is more than 5000 data in table when i download pdf file it generate only one page which i created in acrobat.
I want to increased my number of pages through programatically
Code to extract from starting word to the ending word in pdf.
for example in the below part of pdf file i wan to extract para from Jana-gana to jaya jaya jaya jaya he...
(1) The composition consisting of the words and music of the first stanza ofthe late poet Rabindra Nath Tagore’s song known as “Jana Gana Mana” isthe National Anthem of India.
It reads as follows: -Jana-gana-mana-adhinayaka jaya heBharata-bhagya-vidhataPanjaba-Sindhu-Gujarata-MarathaDravida-Utkala-BangaVindhya-Himachala-Yamuna-Gangauchchala-jaladhi-tarangaTava Subha name jage, tave subha asisa mage,gahe tava jaya-gatha.Jana-gana-mangala-dayaka jaya heBharata-bhagya-vidhata.Jaya he, Jaya he, Jaya he,jaya jaya jaya jaya he.
The above is the full version of the Anthem and its playing time isapproximately 52 seconds.
I am using ItextSharp and I am getting a new font for it by doing this
[Code]....
That file is in that directory on both my dev machine and the server. When i run this on my dev machine it works fine, when published to my server I get an error saying FREE3OF9.TTF is not found as a file or a resource. I have double and triple checked that the file is in fact there on my server. My application has full trust on IIS. and IIS user has full access to this folder and this file.And still I get this error. Very frustrating. This code is Not inside the Web Application but inside a DLL class library that the web application is referencing. Do I need to add any more special permissions or something?
I want to read a pdf file which contains empid and code for 100 nos.. in front end I'll give specific empid..then the corresponding code has to be displayed in the textbox by reading pdf.. I know this can be done by itesxtsharp.dll and regex..
I want to export Asp.Panel content(text, GridViews) with CSS to PDF from C#.NET. I am using iTextSharp and RenderControl with Asp.Panel, but CSS is not rendered in PDF.
How can I solve this problem (with iTextSharp (if is possible) or in another way) ?
I have an application I am trying to write that generates a text file conforming to a file specification, and the file could contain thousands of lines. This part is easy. The more challenging part for me is the user interface. It needs to be a web interface with various options to affect what data gets on the file; this part is no problem. The process for generating the file, though, could take a little time depending on the amount of data , and I would think the web page would time out.
What options do I have for the UI? Could I create some sort of service that the page calls and runs in the background? When the process errors or is finished, I'm thinking there could be an email sent out, or even messages displayed on the page.
I have a small web application based on asp.net 2010 that manages invoices.
After the invoice is saved, it should automatically generate a pdf file.
which of the following solutions would be fast and easy to incorporate?
Use Sql Server 2008 Reports Use Crystal Reports 2008 and Crystal Reports 2008 for VS 2010 Use itextsharp to create the pdf file Use XSLFO to create the pdf file
The point here is I dont know any of the above. Which one is easy and quick to learn and implement. Are there any other solution to achieve this functionality?
I'm new to c# programming..I'm using windows form application c# .netI have been given a .resources file. it contains 2 columns 1) key and 2) values.I have brought the contents of this file into a datagrid using dynamic table in between and using resource manager.Now i have to edit the value column in the datagrid and if i click on a GENERATE button i should create a new resource file and it has to be stored as a file. In the same way i should create many sucj resource file.
I would like to generate a static URL based on a few parameters.The page serve the file for downloading is called CertificateDownload.aspx ,I am generating the download link in Report.aspx.These 2 files reside on the same physical folder.I do not like the replace method ,but I could not think of another way of doing it.How can I improve my code or what is a better way of doing it.
I need the absolute url to be displayed as text in the web browser.
Dim downLoadUrl As String = HttpContext.Current.Request.Url.ToString.Replace("Report.aspx", "CertificateDownload.aspx") + "?CertificateID=" + CertificateName HyperLinkDownloadLink.Visible = True HyperLinkDownloadLink.Text = downLoadUrl HyperLinkDownloadLink.NavigateUrl = downLoadUrl