Get The "@" Value Of A DropDownList When Updating A DataGrid?
Feb 14, 2011
I have a standard DataGrid that looks like this:
<asp:GridView id="MyGridView"
DataSourceID="MyDataSource1"
AutoGenerateColumns="false"
AutoGenerateEditButton="true"
[Code]....
When updating the grid I have an UpdateCommand that looks like this:
UpdateCommand= "UPDATE [MauriceBlackburnOffices] SET [Name] = @Name, [Address1] = @Address1, [TheStates] = @State WHERE [Id] = @Id"
However the @State field is not recognized.
Must declare the scalar variable "@State".
What should the @ value be?
How can I get the DropDownList value into the update statement?
View 2 Replies
Similar Messages:
Nov 16, 2010
Does anyone know how i can take a row data in a datagrid and insert it into a table on my database?
I have the following code, but it doesnt seem to be working.
[Code]....
View 5 Replies
Dec 1, 2010
I have a datagrid that is displaying data that is being returned from a stored procedure. That works fine. The problem is that I want to do sorting. I know that there is sorting functionality in the grid, however, I don't want to go back to the server and get a new set of data. What I want to do is just re-sort the data that is already being displayed.
Basically, I couldn't not find an easy solution to this issue. I tried updating my dataGrid to a gridView control and even that (for my particular issue) was difficult. I wound up un-doing all the changes and just adding another grid that had just the data I wanted for the requirement. If anyone else has an issue like this I would recommend taking it out of a datagrid and writing it in jQuery. I could of written a table that had the data I wanted (and fully sortable using a plug-in mentioned below) in 15 minutes compared to the hours I spent trying to jam a square peg into a round hole.
View 2 Replies
Mar 20, 2010
I bind custom DataTable to DataGrid through ObjectDataSource, where i use SelectMethod and UpdateMethod. SelectMethod working great, but when I try to update row it's breaking by MissingMethodException. What should i do to fix this problem?
View 1 Replies
Mar 24, 2011
I am using the following code to update the data in my datagrid.
But when I click update the value is updated in the database but it still shows old value in datagrid.
If I refresh the page after that then datagrid shows the updated value.
Code On Update Command:
protected void MySQLDataGrid2_UpdateCommand(object source, DataGridCommandEventArgs e)
{
string newData;
TextBox aTextBox;
aTextBox = (TextBox)(e.Item.Cells[0].Controls[0]);
newData = aTextBox.Text;
decimal comm = Convert.ToDecimal(newData);
string UpdateHiveCommission = "Update tbl_HiveCommission set Commission = '" + Convert.ToDecimal(newData) + "'";
MySqlConnection objMyCon3 = new MySqlConnection(strProvider);
objMyCon3.Open();
MySqlCommand cmd3 = new MySqlCommand(UpdateHiveCommission, objMyCon3);
cmd3.ExecuteNonQuery();
objMyCon3.Close();
MySQLDataGrid2.EditItemIndex = -1;
MySQLDataGrid2.DataBind();
}
View 3 Replies
Jan 22, 2010
I have checkbox in datagrid. I m getting the right data from database. As my database is oracle, I m unable to boolean. so, I m using char value to store checkbox value.I m getting the right checkbox value but when I m trying to update checkbox, its just post back but it is not storing correct value.
View 1 Replies
Feb 25, 2011
I have two tables - one called Contract, one called Sow. Contract has a foreign key that points to SOW. What I'd like to do is to be able to edit the Contract details and provide a drop down list of different SOW records to choose from. The current code:
In my Contract Controller:
public ActionResult Edit(int id)
{
Contract contract = contractRepository.GetContract(id); [code]...
The list populates with values, but when I change them and update, the foreign key does not change.
View 2 Replies
Dec 8, 2010
I have a grid view and have five dropdownlist on it. I have edit update and cancel edit buttons on each row.
Drop down list is updating the database, but only first value in the dropdownlist even when user select second, third or any other value from the dropdownlist.
What could possible be the reason for this. Here is my row Edit/ CancelEdit and Updating Events.
[code]....
View 2 Replies
Mar 3, 2011
I have a Dropdownlist in my form as an example as below.
The Dropdownlist items are pulled out from the database table.
When a user Clicks 'Save Template', A new row is created in the database, BUT the dropdownlist items
remains the same :( I want the list to be dynamic so that the user doesn't have to press F5 for updating the list.
View 4 Replies
Apr 7, 2010
Here is the code from a datagrid edit command in which I am attempting to populate a DropDownList in the EditTemplate from the database. The result is only one item (the first) from the database, instead of all items.
[Code]....
View 3 Replies
May 17, 2010
I have a DataGrid with a TemplateColumn containing an asp:DropDownList and a BoundColumn. I'd like to have a VB.NET handler for when the selected item in the DropDownList changes. I'd like this handler to also update the value in the BoundColumn with the value of the newly selected item in the DropDownList.
Can someone point me to some resources I can examine to learn how to do this?
If the handler for the selection changing can give me the value of the NEWLY selected item, it should just be a matter of accessing the cell for my BoundColumn in the same row and writing to it. I do not know the syntax to achieve this.
View 3 Replies
Jan 24, 2010
[Code]....
how to populate datagrid based on dropdownlist changing
View 4 Replies
May 25, 2010
I am trying to display a gridview with element names bound to a datatable (transformed from OracleReader) and also display two contact dropdowns inside the gridview. For each record in the datagrid i want to display these dropdown lists that will also be bound to two different datasources. How would I accomplish this?
View 9 Replies
Feb 3, 2010
the problem is that , i have two dropdown in a datagrid one dropdown contain diffrent type of tax name and other contain the tax rate releated to that tax and i also have one buttton i datagrid which work to insert another row for next tax type.now problem is that as sooon as the new row inserted the both dropdown takes the values but as soon as i changed the selected index of dropdown taxname then then all the taxrate dropdown values has been changed with respect to the new one taxname values.
View 1 Replies
Feb 23, 2010
I was used TextBox in the GridView Then I Replace this textBox with Dropdownlist
and i fetched all the data from the database using DataSource in Editing Mode
But The problem is when i choose item from the dropdownlist to update it,it returns to Empty
(with No values) in the DropDownList??whats the problem?
[code]....
View 5 Replies
May 3, 2010
i have a DropDownlist in my GridView that is bind to another DataSource than the GridView.
For the display it is working well but when I want to update datas I m stuck. Something is wrong and I don't know why.
[Code]....
I am stocking in the Database the value of the dsDroit but when I want to update the field I just know how to get the text not the value.
View 9 Replies
Oct 15, 2010
I have a gridview that holds 4 columns. in the fourth column there is a DropDownlist that holds three items.
I want my users to select one of the values and when they do the auto post back (which is set to true) should execute a method that updates the database selected row. But do i use the selectedindexchanged of the DDL or the Gridview? My head is totally thrashed so i imagine its really simple and im just over thinking it.
[Code]....
View 3 Replies
Oct 15, 2010
[Code]....
Dropdownlist is not updating the table
View 3 Replies
Mar 26, 2010
One of the fields on my formview is a dropdownlist. When I go into edit mode the dropdownlist gets set to the correct value and works fine up to this point. Problem is I just can't see how to get the newly selected value of the dropdownlist to persist to the database when update is clicked. The DDL is a category list and I want to allow changing of the category for each record. Like I said I have it working so it displays the correct category for the record but if I change the DDL (change category) the new selected value doesn't get updated in the database. It just keeps using the binded value that was originally assigned to the selected value of the DDL. see code snippit
[Code]....
The above snippet is how I am binding the DDL. Now to not bore you with a ton of code paste I use various events of the formview to make sure the value displayed in the DDL is correct for the record that I am viewing at the time. All that works just fine. Where I need some pointers is the when I enter edit mode and change the DDL from say fire to ice it isn't getting persited to the database, all other info in the record gets updated just fine but the DDL never changes. I have tried several angles to getting this working and TBH my brain is yelling BREAK TIME.
View 2 Replies
Aug 20, 2010
in dropdownlist show the all PatientName and save the PatientID . how to show the PatientName in DataGrid.
PatientID, PatientName are Foreign Keys. In DataBase on Save the the PatientID my requiredment is PatientName show in DataGrid based on PatientID.
View 1 Replies
Mar 24, 2010
I am trying to create a Gridview in which I can update the Project Officer name in the Gridview from a DropDownList.
The Project Officer DDL comes from a seperate query (SqlProjectOfficerName) as the other information (SqlDataSource1)... as you can see below.
When I select EDIT, the DDL appears and I can select from the list of Project Officers, but when I select UPDATE, the name of the Project Officer doesnot change.
review the code below and assist as appropriate to write the Project Officer's name back to the table.
[Code]....
View 13 Replies
Nov 14, 2010
I have Gridview like that:
[Code]....
I bind data to GV in this way:
[Code]....
No problem with that. Now, I´d like to update the database with the dropdownlist in gridview, I wrote a method in this way:
[Code]....
The problem is when I click on the edit button there is nothing in the dropdownlist, it´s empty
View 6 Replies
Feb 10, 2010
I can't get my gridview to update? Inserting and deleting work fine. Here is my code:
[code]....
View 6 Replies
Mar 27, 2010
[Code]....
DropDownList not updating inside gridview
View 3 Replies
Aug 12, 2010
I'm trying to display a confirm message box before firing selectedIndexChanged when user change selection in the dropDownList. I was wondering if anyone would an example of how to do this.
View 14 Replies
