I am using Helm server for my web hosting, in my control pannel when i tried to create an email account named hr@mywebsit.com it shows error
The POP3 Account 'hr@mywebsite.com' is invalid. specify a valid POP3 account name.
but when I trid hr1@mywebsite.com i can create, so how can i create email accounts with two letters
I'm trying to send an email when a new account is registered with the CreateUserWizzard but no email is being sent. I know my SMTP settings are correct because I have implemented a password recovery system that sends email fine. I added the OnSendingMail property to check and see if it is even trying to send mail by writing some test text to the screen but the sendingmail event isn't even firing. As far as I know all I need to do is insert the mail definition section and create a mail body file, which I have done.
<asp:CreateUserWizard ID="CreateUserWizard1" runat="server"
OnSendingMail="CreateUserWizard1_SendingMail"
LoginCreatedUser="False">
<MailDefinition From="noreply@noreply.com" Subject="Your Account Has Been Created"
BodyFileName="test.txt">
</MailDefinition>
Protected Sub CreateUserWizard1_SendingMail(ByVal sender As Object, ByVal e As EventArgs) Handles CreateUserWizard1.SendingMail
Response.Write("mail is sending")
End Sub
EDIT: apparently the code pasted funky in the insert code section so I repasted it plain text
I am using forms authentication to protect a website and would like to set it so when someone uses the registration form that the account created is disabled and an email is sent to me notifying me of the new signup. Then I can go and enable the account.
I am very new to this but have gotten the basic registration form and login form working with my SQL 2008 Server but this is a bit above me and I have looked through the MSDN info on the CreateUserWizard and don't see options for this.
I tried googling this and have had no luck. I would like to implement membership roles without any reference to email accounts or smtp. Does anyone have information on this topic?
View 4 RepliesI need to create a process of merging letters and/or envelope templates from a web app. We are using VS2010, C# (.net 4.0), asp.net, and Office 2007. The user selects a bunch of accounts from a list, and I need to collect the info for those accounts for merge. One catch is that if I look up an account and one of the two account holders has passed away, I need to change the greeting based on that info. For example, in most cases the letter would say something like Mr. and Mrs. Bob Smith. But if bob is dead, then it would just say Mrs. Mary Smith.
I also need it to open on the client side in word ready to print. So if the letter is 1 page, and the user selects 100 accounts, the word doc should have the letter merged with the 100 accounts just waiting for print. What is the best way to do this?
What is the best approach to allowing users to create accounts and allow them to login later?am thinking of passing all the user information into an attached SQL database, so that when users login l can lod their profilee and allow them to add data on their profile
View 1 RepliesI'm building an ASP.NET application, which will create Windows accounts and groups on the server, and set file/folder permissions for those accounts.
How do I accomplish that?
I've considered shelling out to CACLS.exe, but I got a feeling that's going to get me into other problems eventually. Are there any other options in the .NET framework?
I am using ASP.NET 3.5 and SQL SERVER 2008. And I have a very simple code within my ASP.NET page :
Quote:
[code]....
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:
If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database. Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
I need to create a form that would work like this Choose Provider :( user would select gmail, yahoo, hotmail, ext) Enter Name: ( user enters there name) Message : ( user enters message) and then the "submit"button.
View 2 RepliesI need to create an email application that support sending and receive email application.
View 1 RepliesI need to create Email account using my domain .. I have registered domain i can create unlimited email accounts from my server .. as of now i am using asp.net 2005 and C# . now my questions how to create email using C# ???
for eg : www.mydomain.com
email like : emailid@mydomain.com
I have a asp.net page with .net controls. For a long time, many years, pages was run correctly. But lately some signs were change from their normal display mode to squares. Looks like some encoding issue, but changing it, dosen't .How can I resolve this issue? Why do I see square boxes instead of some signs?
View 3 RepliesI would like to know what the expression for "letters only" is for my asp.net web application. I tried ^[A-Za-z] but it does not work I would also like a regular expression for "numbers only except "-"
View 3 Repliesi am trying to rewrite utl's that contain Hebrew letters, using regular expression, and i am facing some difficulties: This is rule i am using:
<rewrite url="^~/(.+)?sbc_forum([0-9]+)(_([-a-z0-9]+))?.aspx(?(.+))?$" to="~/$1Default.aspx?g=forum&c=$2&$6" processing="stop" />
The bold text suppose to validate pattern that match to Hebrew letters. I am trying to use: ^[p{L}]+$. But its not working..
I've been in IT for a number of years on the Infrastructure side but I'm a complete newbie when it comes to ASP.NET programming (I literally started today). I'm using Microsoft Web Expressions 2 to create a website and am used to using the regular HTML based forms to have the forms capture and email me the form data. However, from a need to have more advanced Form Validation I've embarked on changing my forms over to ASP.NET. All was going well when I seem to have hit a bit of a road block here.
I've managed to figure out the RegularExpressionValidator and RequiredFieldValidator Validation controls however I've now added an ImageButton that I want to be the form Submit button and to email me the form results once the user hits Send. But from the examples I've found online I'm still stumped on how to implement this.
Below is the form code from the page. My site is hosted with 1&1.com and I just want the form info to come to me at my email address, preferably in HTML format.
[Code]...
I have a page that is called from loads of different pages that basically sends emails. It has text boxes for Subject, From Address etc. and a textbox like the one I am typing in now (on this site) which allows users to format a html message.
View 5 RepliesI need to use google accounts in my ASP.NET application.
View 2 Repliesi am working on website which is based on accounts. functionality of this site is completly based on accounts like yearly ledgers, profit & loss acccount final balance sheet. how do i do or implement accounts functionality in web.
View 5 RepliesI receive lists from a web service and then I convert the lists to datatable and then I add the datatables to a dataset and from there I get the xml from the dataset where I can save it into a sql database. But the problem is that the xml has /r/n between all attributes and elements. I dont know how to get this out of the xml. Can this be because of my converter. If so can anyone give me a better way to get multiple lists into a dataset.
View 2 RepliesThe instr function compares two strings and returns an integer specifying the place of the string found.
if I want to search "Quick brown fox" for any of the letters "A B C D", is there a function that can do this?
In short, I want to implement a search engine. I pass the search string as a http querystring and my database uses it as a filter in Select. The problem occurs when I enter some non-standard english letters. Let me elaborate: on Main.aspx page, when I click on "Search", a function calls "Main.apsx?search=something". The querystring is passed as a filter to the database which returns values depending on the filter. The database holds correct data at the moment.
After that, I dynamically modify some hyperlinks' url to something like this: hlink[i].NavigateUrl = "Detail.aspx?search=" + base.Request.QueryString["search"] + some integers;. I want users to be able to click on the link to get details on the result. If they click the link, since a new page is now opened, the database has to be refilled (from cache). The same function for filtering the main database is called with a querystring which should be the same as the search string, but somehow it isn't. It looks like something was lost in a conversion or something. If I use standard english letters, everything works fine. I noticed that prior clicking the link the query string had a value like /u0100d for the non-standard letter, but after clicking the link the value had changed to something like /u0ffff. It obviously isn't the same when typing something in the search box and hitting "search", and when putting this search string into NavigateUrl and clicking on it.
In my database MYDB i have a table called MYTABLE and inside it I have a column called NAME. I want to only return the first 100 characters of the column NAME. (NAME can be up to 2000 characters).How can this be done in SQL as I want to set the first 100 characters to a ASP.NET label.
View 8 RepliesI know there is a lot of information regardind sending activation e-mails, but I have just found information regarding the Create Wizard control, and I'm doing all the forms manually. Right now, I'm able to register a user name in a SQL Server Database, and then an e-mail is sent to this new user to the corresponding em-mail address, the columns the user has to register are:
ID
Name
Nickname
Password (SHA1 hash)
E-mail
I don't know if it is the best approach, and also, there are somethings I don't know how to do. Creating another column in the database table, then a Trigger that on insert fills that column (or just a query that fills it) with for instance "Inactive". Creating a guid code. (What is the guid? and what is it for?) In the email generated attach a link that will open the confirmation.aspx page that will run a code on load that will compare the necessary fields with the database. If the comparison is succesful the page will run a query to update acivation column from "Inactive" to "Active". When the user wants to login compare "username" "Password" and check "Activation" columns before enabling the log-in. THe thing is that I don't know is what is the guid is for, and how to use the data to embed it in the link. Because I have seen something like confirmation.aspx?username or something like that that you have to do.
I'm wondering if there is a way to add a varying number of email addresses to the CC line in ASP/VB.NET.
I have an ArrayList of email addresses that will vary in number each time the application is being used. Here is the code I thought it would handle:
[Code]....
What i am looking to do is to format my email notifaction better. Right now it just comes in one line and i would like to put a break to make it easier to read.
mailMessage.Body = txtIngredients.Text.Trim() & "<BR>" & txtDirections.Text.Trim()