how to make gridview ro visible false when i click on delete button because i am using static data and
i want to open the row in gridview in edit mode when i click on edit button.
How to do this in c#
how we can open gridview in edit mode on page load.
View 1 RepliesI have a listview which i want to open in Edit Mode by default.. How to do ?? i m trying to delete by giving checkbox too.In DetailsView we have Default mode property but not in listview. Code i am using is:
[Code]....
if possible guide me how to delete in bulk with checkbox in listview.
I have a grid view with edit and save buttons when I click on edit it is letting me edit it and if I click on save it is lettingme save the data that I have edited.
The thing is after save is done it is showing the data in edit mode i.e <edit item template > mode I am still seeing the textboxes if I refresh the page then I am seeing it normally.
How can I stop the gridview to show edit mode after the save is done?
- I want to put multiple rows of a gridview into edit mode
- I have not found any easy method to accomplish this task. I found a way to programmatically put a gridview into edit mode, but in testing the code below it works for only 1 row at a time :
[Code]....
How do I change these hyperlinks to say something other then Edit and Cancel?
View 4 RepliesI have a "report" the users can run it basically creates a simple gridview. In the gridview the user can click on a claim ID. The claim id is then passed via url querystring to a claim management page. The claim management page uses a listview to display the various claims and allow users to edit them. I want to use the claim id passed in the url to locate the listview row to open in edit mode, so the user can make changes / alterations to the claim.
View 4 RepliesI have two InlineEditBox.NET controls in a template field inside a GridView. When displayed in the GridView, the first row is OK, but starting with the second row, the controls are automatically displayed in edit mode when the page loads, and I can't figure out why.
[Code]....
When I am in edit mode on any row of my GridView and I press Return while the focus is in one of the row's textboxes, instead of triggering the update button, my GridView1.RowEditing event is fired with a NewEditIndex of 0 This causes the first row to become editable and I lose any values typed into the previous row. How can I stop this from happening?
View 1 RepliesI want to access controls and update database with their value. Notice using following code:
void grdList_UpdateCommand(object source, GridCommandEventArgs e)
{
string str = ((RadTextBox)e.Item.FindControl("txtLookupItemValue")).Text;
}
I have access to control txtLookupItemValue, but it contains before-edit content, not actual value that user has entered.
How to disable editing the data in the cells of datagridview in c#?
View 1 RepliesVWD 2008 Express. Visual Basic. I have a gridview that displays the grade records of students in a class. I am only able to select one row at a time to edit (using the "Edit" button for that row, followed by "Update" when I am finished. I would like to turn on edit for all rows at the same time or for a group of rows and then have one "Update" button to press when I am done with all editing, much as in a spreadsheet where you are not restricted to a single row before you press "Save."
View 5 RepliesI have the need to allow a user to "tab through" making edits on a gridview. There will be one editable column in the row data. The user should be able to hit tab and go to the next row to edit said column. I have not found any easy method to accomplish this task. I found a way to programmatically put a gridview into edit mode, but in testing the code below it works for only 1 row at a time.
reviewTransferGV.EditIndex = 0;
reviewTransferGV.Rows[0].RowState = DataControlRowState.Edit;
reviewTransferGV.EditIndex = 1;
reviewTransferGV.Rows[1].RowState = DataControlRowState.Edit;
reviewTransferGV.DataBind();
how to display a Popup to confirm if he wants to save the changes ,when a record is in Edit mode in Gridview
and user Clicks or tabs away from the row.
I need Put GridView in Edit Mode Programmatically when editing ROLES in ASP MERMERSHIP.I am not able to write the appropriate EVENTS to display the right EDIT TEMPLATE.
View 1 Repliesin .aspx page
<asp:GridView ID="gvErection" runat="server" AutoGenerateColumns="false"
onrowcancelingedit="gvErection_RowCancelingEdit"
onrowediting="gvErection_RowEditing" onrowupdating="gvErection_RowUpdating">
<Columns>
<asp:TemplateField>
<ItemTemplate>
<asp:LinkButton ID="lnkEdit" runat="server" Text="Edit"
[Code] ...
When I am clicking edit button one time ,it is not going in edit mode. It is going in edit mode when i m clicking second time on edit button.
I am using a gridview to display data and want to implement Edit, Update and Cancel in the GridView. Edit and Cancel are working fine but on update the Gridview isn't exiting out of the edit mode. I am using the gridview inside an UpdatePanel.
[Code]....
[Code]....
On clicking updatebutton in gridview i need to check the value which is enter by the user is less then or equal to..How to do thisFor example:-Eidt itemtemplate textbox contain 200.. on clciking update if its any number from 0 to 200 will accept and above 200 will says the value not lessthenor equal to
I use asp.net 4 + c#,I have a GridView with many rows.When a User click the EDIT button in GridView I need to retrieve a Control in that specific row (now in edit mode).This Logic should work on GridEvent_RowUpdatingAt the moment my code (wrong) look inside every Row, so the Control founded is not unique and I receive an error.
// Event handler
protected void uxManageSponsoredContentsDisplayer_RowUpdating(object sender, GridViewUpdateEventArgs e)
// My code (Wrong!!!!):
foreach (GridViewRow row in uxManageSponsoredContentsDisplayer.Rows)
{
TextBox uxStartDate = (TextBox)row.FindControl("uxEffectiveStartDateInput");
}
Hope my question is clear. Solution:
TextBox uxStartDate = (TextBox)uxManageSponsoredContentsDisplayer.Rows[e.RowIndex].FindControl("uxEffectiveStartDateInput");
How can I set a particular row into edit mode in code? Like when the Grid loads up I need the last row to be in Edit mode.
View 3 RepliesI have a gridview to display data, and one of columns was the file path (string). I want to when switch to edit mode, this column will be a editbox + a button, (so if the user click on the button, an OpenFileDialog will be show and he can select a new file) How can I do that?
View 1 RepliesI have a gridview and a template column:
<asp:TemplateField HeaderText="Active">
<EditItemTemplate>
<asp:CheckBox ID="chkbxActive" runat="server" Checked ='<%# Bind("Active") %>' />
</EditItemTemplate>
<ItemTemplate>
<asp:Label ID="lblActive" runat="server" Text='<%# Bind("Active") %>'></asp:Label>
</ItemTemplate>
</asp:TemplateField>
The item "Active" is a bit from the database And for the RowDataBound:
Const HeavyCheckMark As Char = ChrW(&H2714)
For Each row As GridViewRow In gvProductCodes.Rows
If gvProductCodes.EditIndex = -1 Then
' Selects the text from the Label which is inside the GridView control
Dim lblActive As String = CType(row.FindControl("lblActive"), Label).Text
lblActive = lblActive.Replace("True", HeavyCheckMark)
lblActive = lblActive.Replace("False", "")
'Replaces the text in each Label control
CType(row.FindControl("lblActive"), Label).Text = lblActive
Else
Dim chkbx As CheckBox = CType(row.FindControl("chkbxActive"), CheckBox)
End If
The check mark works fine when not in edit mode. But when in edit mode, the row that is being edited works as expected. But the other rows now show True or False. I want them to have the const HeavyCheckMark in it instead.
I have a dynamically built gridview in which every row in editing mode has 2 dropDownLists, i set autoPostBack property of first list to true in order to change the other list values according to the first, but upon postBack, the gridview is not in edit mode any more.
View 7 RepliesI have a webform with two gridviews; a textbox for the invoice number, and a button to kick everything into action. I programmatically handle the select statements in the VB.Net file because I need to iterate through the second gridview's table to perform calculations and then put those results into the first gridview's table. Then I bind them. It works just fine.
The first gridview has one row with the payment information. The second gridview has multiple rows with the items that the payment is handling.Now I need to handle the edit, update and cancel functionality. I tried using a sqlDataSource for edit, update and cancel because it is simple, but it requires a Select statement so I guess that idea is not going to happen. I put a commandField with showeditfield=true, but clicking edit gives an error that rowEdit isn't handled. I have put that sub gvInvoice_RowEditing in there, but being new at this I have no idea what to put into that sub.
I can programmatically create all that functionality in the code behind. Won't it be quicker and easier if I write sub's for Edit, Update and Cancel that tell the gridview what to do - trick it to automatically handle all that? Is there an example available demonstrating how to tell the gridview to go into edit mode and proceed as if it was using a sqlDataSource?As a final note: perhaps it would be simpler if I create a third gridview to handle the job of totaling all the cash and listing each check seperately.Here is my code. It probably isn't the most elegant approach, but it works.
[Code]....
I have a gridview placed on the Panel(Scrollbars set to Both).
If I click on Edit button of the gridview for example Row number 100 then the focus of the page goes to the top of page and I always scroll down to the particular record to make changes.