How To Refresh The DropDownList Without DataBind The DropDownList Because AppendDataBoundItems="True"

Apr 7, 2010

I have a DropDownList in my page, it DataBind with a objectDataSource.

when user select an option base that i have a FormView that show the detail of selected option an it also work with an othere ObjectDataSource.

when user insert, delete or edit an option for example the name of option will in edit mode changed and i need the DropDownList be refresh that show the new name of option.

i alredy know where should i write the code but i don't know how to refresh the DropDownList without dataBind the DropDownList because AppendDataBoundItems="True".

View 2 Replies


Similar Messages:

Forms Data Controls :: Unable To Sort Data-Bound DropDownList When AppendDataBoundItems Is True?

Apr 26, 2010

I'm having a problem sorting a dropdown that I've bound to a SQL Server data source. I've narrowed the problem down to the fact that I have a static item at the top of the dropdown with the data-bound items appended afterwards. If I remove the static item (<asp:ListItem Value="-1" Text="All" />) the ORDER BY part of the select clause works fine. How can I get around this issue? What I would like is to have the "All" static item at the top of the list with the data-bound items sorted alphabetically afterwards. I'm using Visual Studio 2010 and ASP.NET 4 if it makes any difference.

[Code]....

View 1 Replies

Forms Data Controls :: AppendDataBoundItems On DropDownList Causes Odd Behavior?

Sep 14, 2010

I may just thinking wrong about this but I have a problem that is causing me to want to pull my hair out:

I have two DropDownLists. Call them ddl1 and ddl2. I am binding ddl1 to a DataTable on page_load using if not IsPostBack and allowing view state to keep it populated.

I am then binding ddl2 to another DataTable based on the selected item in ddl1 on the SelectedIndexChanged event on ddl1. My problem is that when I set ddl2's AppendDataBoundItems="true", it just appends the items in the DataTable each time I select a new ddl1 item, so that if I change the selected item in ddl1 3 times, I end up with items in ddl2 from the 2 previous selections as well as the current ddl1 selection.

This doesn't happen when I set ddl2's AppendDataBoundItems="false". Obviously, this is not desiariable behaviour.

View 3 Replies

DataSource Controls :: Dropdown List Causing Error When AppendDataBoundItems Is True

Jul 22, 2010

I have a dropdown list where the user can select a name, on change event populates a Session variable and at the same time populates a formview with the full record detail. I want to add a List Item that states "Select Name" but when I add this the page errors. Input string was not in a correct format.

Description:

An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details:

System.FormatException: Input string was not in a correct format.

Because the value returned from the dropdown list box is a string and not a numeric equal to the first name in the list.

AppendDataBoundItems is = true
AutoPostBack is = true

because I want to update the page as a differnent name is selected. I guess I need to not load the form until an actual first name is selected. Uncertain how to prevent the Formview from loading at page load an until a name is selected and not when the dropdown is set back to "Select Name"

View 10 Replies

VS 2008 Databind With Dropdownlist?

Mar 12, 2011

vb Code:
SqlDataAdapter dd = new SqlDataAdapter("select * from book_store", conn);
DataSet ds;
ds=new DataSet();
dd.Fill(ds);
DropDownList1.DataSource=ds;
DropDownList1.DataValueField = "b_id";
DropDownList1.DataTextField = "b_qty";

I m not able to understand what is datavaluefiled and datatextfield are doing here ...... why i can't bind dropdownlist without these two property and what is is use ?Please provide me link if possible .. I m not able to find the correct keyword for searching

View 2 Replies

C# - How To Databind A Dropdownlist At Page Load

Jan 21, 2011

Assuming i have two dropdownlists namely: dropdownlistA and dropdownlistB. at page load, i bind values to dropdownlistA. however, depending on the value selected or displayed in dropdownlistA, i want to bind data to dropdownlistB.

Currently, i can bind data to dropdownlistA alright and i already have the required dataset and datatable bind data to dropdownlist. However, dropdownlistB does not bind at page load since the criteria for filling the dataset to bind dropdownlistB (which is the value of dropdownlistA) is not selected. how can i make this wwork.

I am currently considered if this might work. If i were to call the databind for dropdownlistA in a different declared method besides its binding in page load, and select the value from bind in the declared method, would any value be selected?

For example:

In during page load, i call the a method that returns dataset values which i bind to dropdownlistA(caseIDDropDownList). then i call another method (CreateexhibitDataSet()) which contains the dataset values for binding dropdownlistB(exhibitDropDownList). however, i need to define a criteria in the CreateExhibitDataset() method which i will use to generate the dataset values to bind dropdownlistB. if i were to call for the data bind of dropdownlistA(caseIDDropdownList) again in the CreateExhibitDataset() method and pick the value in the dropdown list, would i get any values?

How can i work around this to bind both dropdownlists on page load?

[Code]....

View 4 Replies

Web Forms :: DropDownList Not Refreshing Despite DataBind

Jan 12, 2011

This is my setup: I've got a dropdownlist of people and a linkbutton next to it to add a person. the linkbutton makes an update panel appear. When clicking save, I want the data to be saved and the new person be selected in the dropdown. As far as I can tell, I have done this properly. After I save the data I refresh the dropdownlist and take the new person's value and set it as the selected value. When stepping through, it shows the ddl with the new person and the new person selected! BUT, when the page comes back, the ddl is unchanged, ie NOT refreshed. I thought it might be something with the Update Panel but I got a similar setup to work on another page! It also works on a nested Update Panel (not shown in the following code). Can you think of why this "deception" is happening?

Here is some of my code.

[Code]....

View 5 Replies

DataBind Of DropDownList Works But Does Not Show In Code Behind

Mar 17, 2011

I'm working on web pages that have an ASP DropDownList defined, and on page load the data source is bound to it through DataSource.DataBind(). When I step through the code, the drop down list does not show anything in it, but when the page actually displays, it does have items in the list. When exactly does DataBind() get applied to the control?

The problem is that some of the values returned by the SQL back end have a null Text, so nothing is displayed in the drop down list for that row. I want to just use the Value as the Text, but only if the Text is null. And when I put the code to loop through and do that right after the DataBind(), there is nothing in the drop down list at that point in the code.

View 3 Replies

Selecting Item In Incapsulated DropDownList On DataBind?

Feb 15, 2010

I have a complex UserControl with the main purpose to encapsulate DropDownList with a number of properties for advanced manipulation.

List is being populated on PreRender event depending on properties previously were set:

protected void Page_PreRender(object sender, EventArgs e)
{
sourceClient.SelectCommand = this.Property1 ? "exec a" : "exec b";
}

The most used property is ClientID:

[Category("Settings")]
public int ClientID
{
get
{
return Int32.Parse(DropDownList1.SelectedItem.Value);
}
set
{
DropDownList1.Items.FindByValue(value).Selected = true;
}
}

Getter commonly is being called by ControlPameters in SqlDataSources on pages with this control.

Setter - from markup: <uc:UserControl1 runat="server" ClientID='<%# Bind("ID") %>' />.

Why does setter from Bind is called earlier then PreRender? And DropDownList is empty and item selecting doesn't work! How to workaround this behavior?

View 1 Replies

Web Forms :: Populate 1 Dropdownlist From Another Using Databind To Oracle Database

Dec 14, 2010

I want to create this scenario: The user selects a school from ddlSchool and this populates ddlStaff with a list of staffs in that school. i knw the codes for sql database but dont know how to do it for oracle.

View 5 Replies

Web Forms :: Dropdownlist DataBind Using Strongly Typed Property For DataTextField?

Aug 13, 2010

I would rather not magic string my DataTextField/Values on the dropdownlist after setting up the source as a List collection of objects.

I was thinking I could use the DataSource properties but it doesn't seem to like the couple of ways I tried.

WORKS BUT NOT IDEAL
//set the datasource to the returned List<Cart>
this.cartDdl.DataSource = CartManager.Load(WebProfile.Current.UserName);
//set the DataValueField to the Cart.ID property
this.cartDdl.DataValueField = "ID";//would rather use the obj property Cart.ID
//set the DataTextField to the Cart.Description property
this.cartDdl.DataTextField = "Description";//would rather use the obj property Cart.Description
//Bind the ddl to the datasource
this.cartDdl.DataBind();
HOW I WOULD THINK IT COULD WORK this.cartDdl.DataValueField = ((Cart)this.cartDdl.DataSourceObject).ID; this.cartDdl.DataTextField = ((Cart)this.cartDdl.DataSourceObject).Description;

View 2 Replies

Web Forms :: DropDownList.DataBind - Collection Was Modified / Enumeration Operation May Not Execute?

Oct 29, 2010

I created this generic method to Bind Controls on my ascx:

[Code]....

I cannot use a for cycle, it must be generic to load several DropDownList or CheckBoxLists on my web user control.

View 1 Replies

Forms Data Controls :: DropDownList DataBind; Appends Instead Renew Items?

Apr 9, 2010

environment: VS2008 When running below code the DDLKlient.DataBind() appends the whole set of names to the already existing list. I.e. I have 2 sets of names in the DropDownList!Question:? what can I do to prevent appending and just get 1 (one) set of names?? is there any refresh option?

Protected Sub DVKlient_ItemInserted(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.DetailsViewInsertedEventArgs) Handles DVKlient.ItemInserted
Dim connString As String

[code]...

View 2 Replies

Forms Data Controls :: Radiobuttonlist - Dropdownlist - Checkboxlist Databind To Custom Attribute

Aug 16, 2010

I was wondering, how about can i databind some custom attributes to my Radiobuttonlist / Dropdownlist / Checkboxlist? My existing code as follows:

With Me.ddlOtherApplications
.DataTextField = "ApplicationName" + Me.iSolutions_SysVariables.sys_iLanguage.Replace("-", "")
.DataValueField = "ApplicationID"
.DataSource = dtOtherApplications
.DataBind()
End With

However, I have 2 more additional custom attributes: ApplicationID and ApplicationImgUrl..... how abt do i databind these 2?

View 6 Replies

Web Forms :: Dropdownlist Selectedindexchanged Not Working With Autopostback = True

Jan 19, 2010

i have two dropdownlist in my webform both are filled dynamically in the page_load event

[Code]....

View 8 Replies

Web Forms :: DropDownList Selected Value Getting Lost When AutoPostBack Is True

May 7, 2015

Am using DropDown list. Whenever Autopostback is true it selecting first value of dropdown list...

View 1 Replies

Web Forms :: Required Validator Disappears After Autopostback Set To True Of A Dropdownlist

Oct 13, 2010

My dropdownlist having data from database added with the following item:

DropDownList.Items.Insert(0, new ListItem("Please select", "0"));

View 2 Replies

Web Forms :: How To Control Onselectedindex Change Event Of Dropdownlist On Autopostback Is True

Jan 8, 2011

I am having a problem with dropdownlist auto post back set to true...

In my project I have to hide and display two other dropdown lists depends on selected index change of a main dropdown..

I set the auto postback to true and I am hiding and displaying the dropdowns on user selection...Everthing is working fine..

But I am having a very hard time when user types when the dropdown got focus..this is very annoying situation..if type one word its doing a postback and they are unable to type further...

is there any way to fire this onselectedindex change event on blur or on enter key press...is there a way of doing it with java script or jquery...

View 6 Replies

Refresh DropDownList From EntityDataSource?

Mar 18, 2011

What my code does is that the EntityDataSource has a Where Parameter tied to the first DropDownList and it populates the second DropDownList, but when the first DDL changes, the EntityDataSource doesn't change the values of the second DDL. Worth mentioning this is inside a ModalPopupExtender which is inside an UpdatePanel. Maybe there is a way in just putting all the data in the second DropDownList and filter it depending on the value of the first one... or something like that... so there's no need of refreshing the data.

<asp:DropDownList ID="PaqueteKitDropDownList" runat="server" DataSourceID="PaqueteEntityDataSource"
DataTextField="Nombre" DataValueField="ID_Paquete" />
<asp:EntityDataSource ID="PaqueteEntityDataSource" runat="server" ConnectionString="name=CCEntities"
DefaultContainerName="CCEntities" EnableFlattening="False" EntitySetName="Paquetes">
</asp:EntityDataSource>
<br />
<asp:Label ID="Label66" AssociatedControlID="PlanKitDropDownList" runat="server"
Text="Plan:" />
<asp:DropDownList ID="PlanKitDropDownList" runat="server" DataSourceID="PlanKitEntityDataSource"
DataTextField="Duracion" DataValueField="Costo" />
<asp:EntityDataSource ID="PlanKitEntityDataSource" runat="server" ConnectionString="name=CCEntities"
DefaultContainerName="CCEntities" EnableFlattening="False" EntitySetName="Duracion_Plan"
Where="it.ID_Paquete == @ID" OrderBy="it.Duracion ASC">
<WhereParameters>
<asp:ControlParameter DbType="Guid" Name="ID" ControlID="PaqueteKitDropDownList"
PropertyName="SelectedValue" />
</WhereParameters>
</asp:EntityDataSource>

View 2 Replies

C# - Disable Refresh When Dropdownlist Is Open?

Jan 27, 2011

i have a webpage that loads data into a gridview and refreshes the gridview every few seconds. I do this via a asp:Timer which runs a C# function every few seconds to requery the database and databind the gridview.

I also have a few dropdown lists to filter data from the gridview. These dropdown lists get their data from the same dataset as the gridview (e.g. if the gridview shows the stats of all apples being plucked from trees, then the list may contain e.g. all distinct apple types). How i refresh these dropdown lists is again to requery the dataset and reset the selected index to be one selected at time of refresh. So this causes a problem where the timer is up when the dropdown list is open - the index on the dropdown list is selected and refreshes the gridview, the dropdown list also refreshes with the current selected index and closes.

So the question i have how to disable my timer refresh from going off while the dropdown lists are active - or maybe how do i do this better?

View 1 Replies

AJAX :: Getting Dropdownlist To Update Without Postback / Refresh

Jun 27, 2010

I have a number of cascading dropdownlist controls on a page. The results in dropdownlist2 are dependent on the results in dropdownlist1, pretty basic stuff.

I now would like to eliminate the terrible postback or refresh of the page that occurs after the SelectedIndexChanged event fires on dropdownlist1, is it possible to do that in Ajax?

What I want the results in dropdownlist2 to populate without the obvious refresh of the page.

View 2 Replies

Web Forms :: Howm To Refresh Page Update In DropDownList

Jan 12, 2011

I want dont refresh page updata DropDownList I donot use AjaxToolKit

View 2 Replies

AJAX :: How To Refresh Update Panel On DropDownList Change

Nov 4, 2013

I am trying to refresh updatepanel using dropdownlist but facing problems.

<asp:DropDownList ID="ddlClass" EnableViewState="true" AutoPostBack="false" class="input-large span10" runat="server" onchange="loadAllDefaults();" Style="width: auto;">
</asp:DropDownList>

Above is the code of dropdownlist

<asp:ScriptManager ID="ScriptManager1" runat="server" />
<asp:UpdatePanel ID="UpdatePanel1" UpdateMode="Conditional" runat="server">
<Triggers>
<asp:AsyncPostBackTrigger ControlID="ddlClass" />
</Triggers>
<ContentTemplate>
<asp:Repeater ID="rep1" runat="server">

[Code] ....

This is updatepanel code. as shown in the code, i am referring to ddlClass in triggers which already calls a javascript function loadAllDefaults();

The problem is, since ddlClass is calling javascript function 'onchange' property, i cannot call any other function of backend code and I want to refresh the updatepanel on the basis of selected value of dropdownlist.

How can i do this? I have created a function in c# code in backend but I am not able to call both functions together!

View 1 Replies

AJAX :: Dropdownlist.onselectindexchanged Only Refresh Some Portions Data, Not The Whole Page?

Mar 25, 2010

I have the webpage with below code. There exists dropdownlist within the gridview and updatepanel. I hope that the dropdownlistddlAltProduct refresh only some portion of data in div when OnSelectedIndexChanged. Not the whole page as now as you see autopostback='true'. How to change the current situations???

<asp:UpdatePanel ID="updPanel" RenderMode="Inline" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<asp:Label runat="server" ForeColor = "Red" ID="lblMsg" ></asp:Label>

[code]...

View 5 Replies

Web Forms :: Add Blank Item In Dropdownlist Without Using Appenddatabounditem After Control Parameter Refresh?

Feb 2, 2011

How to add blank item in dropdownlist without using appenddatabounditem after control parameter refresh?

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved