dear all, my requiredfieldvalidator is screwing up my ok button in my modalpopup and I dont know why. In otherwords, once I include my requiredfieldvalidator and the user clicks ok in the modalpopup, the ok doesnt get fired. see my code below.
[Code]....
When I place ASP:RequiredFieldValidator on my ModalPopUp's panel, then why panel is not seen to me.
If I remove Validator on my ModalPopUp's panel then it works alright.
Why?
How to get worked Validators on ModalPopUp?
Whenever you have something like this:
MsgBox("Message before page load")
Response.Redirect("xyz.aspx")
The message box pops up and when you click ok in messagebox then you get redirected to xyz page. I am using Ajaxmodalpopupexntender instead of Message box which loads a UserControl into it. After the popup I have response.redirect. Now, my modalpop doesn't render on to the screen before redirect, waiting for Ok button to be clicked and then get redirected. It directly gets redirected to the xyz page without loading the popup.
i do have a form. inside specific asp:textboxes are "secured" by RequiredFieldValidator and RegularExpressionValidator running. in another div-element i do have buttons, which are expected to load different pages of my website. the problem is: when i click on either of these buttons it is not working as my validation-controls are fired prior to the onclick-button-events.
View 10 RepliesI use 2 requiredfiledvalidator for 2 selects, one is working but the second one (the one I need) isnt
<asp:dropdownlist id="ddlMod" runat="server" Width="235px" AutoPostBack="True" Font-Names="Arial" Font-Size="XX-Small">
</asp:dropdownlist>
<asp:requiredfieldvalidator id="RequiredFieldValidator1" runat="server" Font-Names="Arial" Font-Size="XX-Small"
ErrorMessage="Select Mod" InitialValue="00" Display="Dynamic" ControlToValidate="ddlMod">
</asp:requiredfieldvalidator>
<asp:dropdownlist id="ddlInd" runat="server" Width="235px" AutoPostBack="True" Font-Size="XX-Small">
</asp:dropdownlist>
<asp:requiredfieldvalidator id="RequiredFieldValidator2" runat="server" Font-Names="Arial" Font-Size="XX-Small"
ErrorMessage="Select Ind" InitialValue="0" Display="Dynamic" ControlToValidate="ddlInd">
</asp:requiredfieldvalidator>
If i select the 2nd one I can see the error message for the 1st one, but I can't see any message if I dont select any or if I select the 1st one.
I create a new website in VS 2010 (VB .Net). I add a table, within it i add a textbox, a button and a RequiedFieldValidator. I set the RFV ControlTValidate property to the textbox. When i move(click or tab) away from the textbox, the RFV doesnt kick in the error message that i have set.
The RFV code is
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"
ControlToValidate="txtEnterName" ErrorMessage="RequiredFieldValidator"
InitialValue="0" ForeColor="#FF3300"></asp:RequiredFieldValidator>
Texbox
<asp:TextBox ID="txtEnterName" runat="server" Width="221px"></asp:TextBox>
As the title says. What could be amiss?
I have a regular TextBox on my page - <asp:TextBox ID="tb" runat="server" />
The following works:
<asp:RequiredFieldValidator ID="r" runat="server" ControlToValidate="tb" ErrorMessage="error" />
The following does not work:
RequiredFieldValidator rfv = new RequiredFieldValidator();
rfv.ID = "rfv";
rfv.ControlToValidate = tb.ID;
rfv.ErrorMessage = "error";
I have a WebForms app that uses a field validator on a dropdownlist. It works in IE but not FireFox. This is pretty straightforward stuff I'm doing. Here are the setups for the dropdown and validator:
<asp:DropDownList ID ="dmbFileActNo" runat="server" CssClass="DROPDOWN_MEDIUM" AutoPostBack="True"></asp:DropDownList>
<asp:requiredfieldvalidator EnableClientScript="true" id="rfvFileActNo" Display="None" ControlToValidate="dmbFileActNo" Runat="server" InitialValue="-1"></asp:requiredfieldvalidator>
I'm running ASP.Net 2.0 on the web server. Javascript is enabled on the FireFox browser-- this problem happens on all FF browsers I've tested, on multiple everyday machines, so I don't believe it's due to a locked down install.
I have the following code:
<asp:RadioButtonList
ID="rbltest"
RepeatDirection="Horizontal"
RepeatLayout="Flow"
[Code]....
If the user submits this form, and they have not selected a option , I'd expect the validator to catch it but it's not.
How can I get my validator to ensure that one of the option radio buttons are selected?
I've recently finished building one of my first websites (and CMS) in ASP.NET but have came across a problem where a RequiredFieldValidator isn't working as it should do? I originally created the admin page to not require the RequiredFieldValidator, but now that I do need it the page won't acknowledge it's there. I have even set the field in the database to not accept nulls, but the query will still insert a null value into the database (SQL Server 2008 Express).
The TextBox that I'm referring to is "txtSectionTitle"
[Code]....
I have a FormView in which I have placed RequiredFieldValidators on some of the input controls in EditItemTemplate. But the validators all don't work when I hit the submit button.
I've tried FormView1.FindControl("RequiredFieldValidator1").Enabled = true but the compiler complains that 'System.Web.UI.Control' does not contain a definition for 'Enabled'.
See my code below:
[Code]....
I have a dropdown list, where when I select OPTION value a Textbox appears. The issue is that when, I submit directly the required filed errors gives me message for both ie for dropdown and Textbox. It should only give error for dropdown.
Second thing,
The textbox validation is not firing when submitted without any value in it.
see the code for your reference:
<asp:DropDownList ID="ddlGraduation" runat="server" CssClass="txtfld-popup_drp1">
</asp:DropDownList>
<asp:RequiredFieldValidator CssClass="error_msg" ID="reqGraduation" runat="server" ControlToValidate="ddlGraduation" ErrorMessage="Please select
[Code].....
I'm doing a website with Ajax and Framework3.5.
I have a update panel inside a modalpoupextendar which is in another update panel.
When user need to click the button in the parent update panel the modal popup will appear,
then in the popup if user click a button there I Need to show some text in a user control which placed in the panel.
See the html tag and tel me any solution. Its not working for the first click its working in the second click only.
Code:
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:UpdatePanel ID="UpdatePanel1" runat="server" UpdateMode="Conditional" ChildrenAsTriggers="False">
<ContentTemplate>
<asp:Button ID="btnHidden" runat="server" Text="Button" />
<cc1:ModalPopupExtender ID="ModalPopupExtender2" runat="server" BackgroundCssClass="modalBackground"
BehaviorID="popup" DropShadow="true" PopupControlID="pnlUpdate" CancelControlID="btnNo"
TargetControlID="btnHidden">
</cc1:ModalPopupExtender>
<asp:Panel ID="pnlUpdate" runat="server" CssClass="modalPopup" >
<div>
<asp:UpdatePanel ID="UpdatePanel2" runat="server" UpdateMode="Always">
<ContentTemplate>
<div>
<uc1:Feedback ID="Feedback2" runat="server" />
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger controlid="btnTest" eventname="Click" />
</Triggers>
</asp:UpdatePanel>
<asp:Button ID="btnTest" runat="server" Text="Test" onclick="btnTest_Click" />
<asp:Button ID="btnNo" runat="server" Text="Cancel" /></div>
</div>
</asp:Panel>
</ContentTemplate>
</asp:UpdatePanel>
</asp:Content>
I have three modal popups that are working properly because I test it the controls with simple plain text.
I placed a form view and a datalist in the first two modal popups and everything seems to be okay.
I need to place a user control in the third modal popup but everytime I place the user control I get a javascript error for that particular modal popup.
When I copy paste the same modal popup on a blank page and place the user control inside of the panel then the modal popup works perfectly fine.
I basically copy/paste the same code back where the other two modal popups are then I get the same JavaScript error.
The modal popup crashes first on:
this._popupElement.parentNode.appendChild(this._foregroundElement);
I have a movie embeded of type="application/x-shockwave-flash" and it's not working. Am I doing something wrong? I copied the embeded code and replace the DIV in the ModalPopup example page and it's not working.
View 2 RepliesI am trying to create an Abstract class that looks like the following (note that I coded it right inline here so it may not compile):
[Code]....
I want to (in my edmx design) be able to inherit from EntityBase and have each of those 6 columns be added to the physical database table representing the object that inherits it. So, for example, I have a class called Test that would look like this:
[Code]....
That Test class should have its physical data store mapping based on the other "stuff" plus the properties inherited from EntityBase. Thus, the database table for Test needs to also include those 6 columns from EntityBase. However, I'd like for it to be set up in a way so that they get mapped such that in the edmx design (what is that designer called anyway) when an entity inherits from the EntityBase, I don't need to do any further work to propogate those 6 columns over to the underlying database table. Am I making sense in how I am explaining this? how to accomplish this?
On a side note (and this can be answered separately or not at all) assuming this mapping is in place, NHibernate has a concept called an Interceptor. I'd like to add an "interceptor" to the delete function of any entity that is inherited from EntityBase so that it updates DeletedAt with the current time and DeletedBy with the current user and the same would be true for any updates with UpdatedAt/By. With NHibernate, you can test inside of this interceptor whether or not the object is of a certain type (e.g. object is EntityBase). Any ideas on how to get this with EF 4.0?
I am using following setting for customError.
< customErrors mode="On" defaultRedirect="GenericErrorPage.aspx" >
< error statusCode="403" redirect="NoAccess.aspx" />
< error statusCode="404" redirect="FileNotFound.aspx" />
< /customErrors>
I have a folder "Admin" having access to administrators role. When someone other than administrators tries to access the pages inside admin folder, it is redirected to login page. My expectation is to display "NoAccess.aspx". Whats wrong with this code? Or is there other meaning to statusCode=403.
I have develoed a vb.net application for my client. I have been using datareport for that. The Data report get the output from the dataset file with the parameter. Now we need to show the value order by. For this i have added the order by in sql query which is generated by .xsd file. But still the output does like,...................
View 1 RepliesI have added a new route to Global.asax in order for me to create some nice seo friendly URLs for some news items I am displaying
routes.MapRoute(
"News",
// Route name
"{controller}/{action}/{id}/{title}",
// URL with parameters
new { controller =
"News", action =
"Story", id =
"", title =
"" }
// Parameter defaults );
routes.MapRoute{"Default",
// Route name
"{controller}/{action}/{id}",
// URL with parameters
new { controller =
"Home", action =
"Index", id =
"" }
// Parameter defaults );
The problem I have is that when I now hit my home page I am getting [URL] displayed in my URL rather [URL] which is what I used to get. I think the news route is picking up everything. Has anyone any ideas on what constraint I could put on the news route above so that it only ever processes requests from the news route. I was thinking of doing a reg ex on the title and excluding anything with the '-' character in it but I coud not get that to work
I am using accordin menu in my site, placed in Master Page, It has 4 pane, each pane have multiple links. it was working fine previously. But suddenly it is displaying this error message There is no source code available for the current location.
It's is asking for show assembly. When I clicked on that I got a stopage at the stack
0000001a mov eax,dword ptr [ebp-0Ch]
I am really not sure what does it means. Also, there are several links in accordin menu, after clicking on anyone of the link I am not able to click the other link, might be because of the above reason.
I am trying to use the ASP.NET regularexpressionvalidator to apply a password policy that enforces the following policy:
Password should include at least 6 characters, at least one small letter, at least one Capital letter, at least one number, and at least one special character. Here is the expression:
^.(?=.{6,})(?=.d)(?=.[a-z])(?=.[A-Z])(?=.[@#$%^&+=!-_()?]).*$
The strange thing I found is that it works fine except with the following scenario, If I use all the required combination without special character such as Hello123" it finds it as valid password. below is the controls used for testing.
I have developed a ASP.Net Server custom control in C# for 3.5. named "myCheckBoxList" inherited from CheckBoxList web control. Working is very simple. It just works as a two option buttons. I have taken a CheckBoxList which will show two fixed checkboxes always. When I check one checkbox then another will uncheck as vise versa. This control works perfectly only when I have placed only one instance of that control on web page. If I place more than one instance of control then it doesnt works.
I need solution from expert minds from developers as stackoverflow users.
I have created a simple app with a page having a server side form, three fields and a button that submits and performs two operations - 1) adds the form fields to the database table 2) sends an email. Now everything works fine on the web browser on my machine but when I access the app through my mobile, the page does not seem to work. the UI and all are set but the button click functionality doesnt seem to be working and also the label which is set after a successful submit is already visible and showing the "thank you" message. Am i doing something wrong here? I have checked the app on Nokia Smartphone browser, android phone, and iphone simulator.
View 2 Replies I have VS 2010. But IDE Not Working Properly like some times breakpoints are not applied, auto complete text is not showing etc.,
How can I get VS 2010 IDE right.
I have done Devenv /ResetSkipPkgs also...and resettes all the settings.
I have to show some functionality similar to accordion that is of jquery so i made a custom function of jquery to produce the effect. there is a grid view in which there are two div's here is the code.
<asp:GridView ID="grdAccordion" runat="server" AutoGenerateColumns="false" Width="200px">
<Columns>
<asp:TemplateField>
<ItemTemplate>
<div class="myFirstDiv" onclick="testToggle(this)">
<%#Eval("Name")%>
<div class="mySecondDiv" style="display:none">
<%#Eval("Person_Name")%>
</div>
</div>
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
The second div has style property display none. by default all the div are closed.
than i have made a js function that uses the toggle function to perform the action code.
function testToggle(testDiv) {
debugger
var sntHdnValue = $('#hdnSetFlag').val();
if (sntHdnValue == 1) {
$(testDiv).find('div:first').show().attr('isOpen', 'true');
}
else {
$(testDiv)
.parents('table:first')
.find('div[isOpen=true]').removeAttr('isOpen').toggle('slow');
$(testDiv).find('div:first').show().attr('isOpen', 'true');
}
sntHdnValue++;
$('#hdnSetFlag').val(sntHdnValue);
}
here i have made use of the hidden field that let's me know that it is the initial state every thing is closed i am adding a custom attr isopen for my identification
1)the current situation is this At load everty thing should be closed.
2)than at a time only single div should be open. this is working fine. The problem is if i click on the same div that i clicked to open than it has two custom attr isopen now it breaks the second case. how to solve it.