Setting CustomErrors In Web.config Doesn't Work At This Case?

Dec 20, 2010

In my ASP.NET 3.5 Website which is published in shared hosting provider , I've configured my web.config file like this :

<customErrors mode="On" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="AccessDenied.htm"/>
<error statusCode="404" redirect="FileNotFound.htm"/>

[code]...

This is a yellow page which is not user friendly and we didn't expect . I'm wondering setting customeError in webconfig doesn't support this type of address or not ? How can i prevent users seeing this yellow page . Edit : solution you mentioned are about configuring IIS ,But as i mentioned earlier , my site has been published on shared hosting provider . I don't have those access at IIS , What should i do at this situation ?

View 3 Replies


Similar Messages:

Root Path With Tilde - Doesn't Change Upper Case To Lower Case

Dec 30, 2010

I have my project set up with the virtual path "/MyVirtualPath", create the virtual directory in IIS 6 (W2003) and everything works fine. Then to work better with Google Analytics I change the virtual path "/myvirtualpath" and change all redicecciones and links to lowercase. also applies the class "lowercase route urls in aspnet mvc" and works perfectly.

The problem I had to modify the virtual directory in IIS, delete virtual path "/MyVirtualPath" and I created the new "/myvirtualpath", but in all cases I use tilde "~" or where I make a "RedirecToAction" (which should take "LowercaseRoute"), continues to maintain the virtual path "/MyVirtualPath". For example, if I see the HTML source code in the browser, see "/MyVirtualPath/Content/Site.css" instead of "/myvirtualpath/Content/Site.css. "

View 1 Replies

Web Forms :: Setting Focus On Page Load Doesn't Work?

May 6, 2010

I have been browing forums & googling for a couple of hours this morning, trying to find an answer to what (to me) should be a very simple issue. (I am a Delphi programmer moving somewhat reluctantly to Visual Studio C# , for web apps) I have created the simplest ASP.NET website in Visual Studio, containing a Textbox and a Button. When the website loads, I want Textbox1 to have focus. Simply doing

[Code]....

and this too does not work. However, if I press the Enter key when the webpage is displayed, then focus does move to TextBox1 (and pressing Enter again will fire any code attached to Button1). Surely it cannot be this hard to perform something so simple?

View 9 Replies

Escape Character &amp; Doesn't Work For Impersonation Tag In Web.config

Jun 23, 2010

I hope someone has a good answer to this stupid question I have. I'm trying to use impersonation in my asp.net 3.5 application within the web.config file to connect to my sql server 2008 database so I use:

When I run my app, I get this:

Configuration Error

Description: An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.

Parser Error Message: Could not create Windows user token from the credentials specified in the config file. Error from the operating system 'Logon failure: unknown user name or bad password.

Source Error:

impersonate="true" userName="testUser" password="test(ampersand sign, this forum actually does render it properly)amp;test" />

So basically it posts the password with the actual escape for ampersand rather than the actual ampersand. This leads me to believe it's processing it as a literal but validating it as xml, unfortunately I can't just use "test&test" in the web.config file because visual studio just won't compile it since it's marked as an error.

View 1 Replies

Asp.net - Web.config Entry Doesn't Work In A Specific Site

Sep 5, 2010

in my web.config file i've added an entry:

<httpModules>
<add type="HDI.HTTPFilter" name="HTTPFilter"/>

but the server where i've placed the website on is not reading this entry but in other servers the site works perfectly.what the problem might be?

View 1 Replies

Full Trust Doesn't Seem To Work With WebMatrix Web.config File?

Mar 30, 2011

I've been told by my host that I need to enable FullTrust in my webmatrix website because I keep getting an error. (BUT, I have used a different host, and everything on my site works perfectly with them without modification). Anyway, I used the code my host suppllies in their KB, but that just generates a different error. So I looked up full trust on google and used about 5 different code samples to enable full trust but they all generate errors! even the ones on MSDN. And googling "Full Trust WebMatrix" doesn't really bring anything helpful either.

How can I successfully add full trust to a web.config file that is made using WebMatrix?

[Code]....

View 1 Replies

Changing CustomErrors In Web.config Semi-dynamically

May 24, 2010

The basic idea is we have a test enviroment which mimics Production so customErrors="RemoteOnly". We just built a test harness that runs against the Test enviroment and detects breaks. We would like it to be able to pull back the detailed error. But we don't want to turn customErrors="On" because then it doesn't mimic Production.

I've looked around and thought a lot, and everything I've come up with isn't possible. Am I wrong about any of these points?

We can't turn customErrors on at runtime because when you call configuration.Save() - it writes the web.config to disk and now it's Off for every request.We can't symlink the files into a new top level directory with it's own web.config because we're on windows and subversion on windows doesn't do symlinks.
We can't use URL-Mapping to make an empty folder dir2 with its own web.config and make the files in dir1 appear to be in dir2 - the web.config doesn't apply. We can't copy all the aspx files into dir2 with it's own web.config because none of the links would be consistent and it's a horrible hacky solution.
We can't change customErrors in web.config based on hostname (e.g. add another dns entry to the test server) because it's not possible/supported. We can't do any virtual directory shenanigans to make it work.

If I'm not, is there a way to accomplish what I'm trying to do? Turn on customErrors site-wide under certain circumstances (dns name or even a querystring value)?

View 2 Replies

Configuration :: Web.config 404 CustomErrors / Change The Url To Def23947823h.aspx It Is Caught And Redirects To Correct Page?

Sep 14, 2010

I am having an issue where if I change my url to .asp from .aspx i get a 404 error but it is not handled by my custom errors. If I change the url to def23947823h.aspx it is caught and redirects to correct page.

[Code]....

View 8 Replies

SQL Server :: Setting Up The CASE Keyword In SQL From Web App?

Mar 7, 2011

I was wondering how I would go about setting up the CASE keyword in SQL from my Web app. I have a table where I need to update anywhere between 20 and 300 rows with different values. My table looks like this

ID EventID SeatType SeatCount Status Comments

On my page, these rows are listed in a table with a textarea to add comments. So when I click a button I need to update All the comments for all the users of a certain "EventID".I think my SQL Statement should go something Like this:

UPDATE Events
SET Comments =
CASE [code]....

Is that correct? I would be getting the ID and comment from each row of the table. Also (using C#) what would be the most efficient way to get this information into the query? I was thinking to use a for statement but I hear many string concatenations requires lots of processing?

[Code]....

View 7 Replies

How To Determine Which Parent Config File Is Locking A Web.config Setting

Mar 15, 2011

When I open my ASP.NET site in IIS and try to open the .NET Trust Levels, I get an error message:

.NET Trust Levels There was an error while performing this operation.

Details:
Filename: ?C:inetpubwwwrootmyappweb.config
Line number: 445

Error: This configuration section cannot be used at this path. This happens when the section is locked at a parent level. Locking is either by default (overrideModeDefault="Deny"),or set explicitly by a location tag with overrideMode="Deny" or the legacy allowOverride="false".

I've checked a few places, but I haven't found anything that seems like it would be locking that setting. Is there a systematic way of determining where that setting is locked?

I'm using IIS 7.5 and .NET 3.5 sp1.

View 1 Replies

C# - Command Or Setting For A Child Web.config To Ignore The Parent Web.config

Jun 23, 2010

I am running into a problem with a web.config in a child project that has the same connection string setting as a parent. We have this in several of our web apps but there is one case where we want a child not to use the parent web.config. Is there a setting or command in the child web.config to ignore the parent web.config?

View 4 Replies

SQL Server :: Calculation In Case Don't Work?

Jul 15, 2010

I have below sql statement wich don't work. It don't come up with an error but votepercentage is 0 and when I calculate it manually it should come up with

Dog = 5/9*100 = 55,55
Cat: 4/9*100 = 44,44
in votepercentage

My code:

[Code]....

The result for above code:

Dog 5 0
Cat 4 0

I triple checked that questionAnswersCount is 9 Anyone who can tell me what is wrong with this line:

(CASE WHEN pa.answersCount = 0 THEN 0 ELSE Convert(decimal, ((pa.answersCount/pq.questionAnswersCount) * 100)) END) as votepercentage

View 3 Replies

Web.config Error: Could Not Find Schema Information For The Element 'case'

Nov 7, 2010

I've added the section below trying to have my menu displayed correctly in the Chrome browser.

However, VS2008 complains:

Message 1 Could not find schema information for the element 'case'.

Message 2 Could not find schema information for the attribute 'match'.

From web.config:

<add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>

<add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>

<add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>

[code]...

View 2 Replies

AJAX :: Make This Work For Several Days But It Just Doesn't Work?

Oct 7, 2010

i'm trying to make this work for several days but it just doesn't work.

this is my code:

aspx page:

[Code]....

webservice:

[Code]....

this was downloaded from this website.

the problem is that the page loads fine but no autocomplete occurs.

View 5 Replies

Ajax With WCF Work. But Few Miniute After, Doesn't Work

May 11, 2010

I am a new to WCF. I have written ajax to use a web service before, but on this project I am trying to use ajax to WCF.After I build the project and wcf using ajax, I receive the return successfully. But, 10 or more minutes later I don't get a return, the ajax calls the error function, and the fiddler returns nothing.

If I rebuild the project without any source modifying, I receive the return successfully again.

View 2 Replies

Place Setting On Web.config?

Sep 21, 2010

we were all recently alerted by scottgu with this security vulnerability. [URL] I'm wondering, since I've been redirecting errors via Global.asax on the Application_Error event, I was wondering if that can suffice the fix for this issue or do I still need to place a setting on the web.config?

View 1 Replies

C# - Setting Log File Path In App.config?

Mar 5, 2010

I have one requirement that i have to place the log file in the same directory of solution. That is my solution is placed in [drive]workProject1solution file. But i have to create my log file to [drive]workProject1Loglog.log. How it can be set in app.config file.

View 1 Replies

Difference Between Setting.settings And Web.config

May 23, 2010

This might sound a bit dumb. I always had this impression that web.config should store all settings which are suspect to change post-build and setting.settings should have the one which may change pre-build.but I have seen projects which had like connection string in setting.settings. Connection Strings should always been in web.config, shouldnt it?I am interested in a design perspective answer.Just a bit of background:My current scenario is that I am developing a web application with all the three tiers abstracted in three separate visual studio projects thus every tier has its own .settings and .config file.

View 2 Replies

Setting The Page Theme Outside Of The Web.config?

Oct 16, 2010

I'm using a flash app to upload images (EAFlashUpload - http://www.easyalgo.com/eaflashupload.aspx) which works great, but there's a problem.For reasons beyond my understanding, if a theme (page theme = "white") is declared in the web.config, it doesn't work correctly; even if there is nothing in the theme folder at all! Oddly though, it's happy if the theme is set at the page level. Problem is, I don't want to have to hard code the page theme into every page. Is there another place I can set the page theme? I've tried in the code behind of the master page (pre_int), and also adding a web user control with some code behind to the master page.

View 7 Replies

Web.config: Changing An Application Setting With C#?

Oct 29, 2010

How can I change an application setting within a web.copnfig programmatically with C# (from another application, which configures the web-application)?
The following code snipped doesn't work, because AppSettings[...] is readonly!

configuration = WebConfigurationManager.OpenWebConfiguration(...);
ConfigurationSectionGroup configurationSectionGroup = (ConfigurationSectionGroup)configuration.GetSectionGroup("applicationSettings");
ConfigurationSection configurationSection = (ConfigurationSection)configurationSectionGroup.Sections[...];
configurationSection.CurrentConfiguration.AppSettings[...].value = value

View 3 Replies

VS 2008 - Accessing Setting From Web.config From Vb Code?

Apr 30, 2010

I want to use the setting stored in the web.config file in my vb code, but don't know how to reference them.

More specifically I want to access the Host name, username and password in the smtp settings to send an email. My web.config is

[code].....

View 11 Replies

Silverlight Web.Config Setting For Web Service Reference URL?

Nov 12, 2010

I have a Silverlight control that is hosted within an ASP.NET application. The Silverlight control has a web service reference. The URL of this service is going to vary when we install the application for our customers. I need a way to be able to change this web service reference URL from within the web.config of the ASP.NET application. How can I do this?

View 2 Replies

Setting Variables In Web Config For Web Service Consumption?

Apr 6, 2010

I did a couple google searches about this and am not finding anything, so I thought I'd ask here. I'm working on our internal CMS and I noticed that we're getting live data back when doing debugging because of our web services instead of the dev data that I wanted. It doesn't do this on our dev CMS website, but we're trying to do all our development on localhost. Is there any way to set up an environment variable in our web config for the URL so that the CMS points to the dev database instead of live database that is referenced in the wsdl files?

View 3 Replies

Setting A Date Format In ASP.NET Web.config Globalization Tag

Mar 18, 2010

In our web.config I am using the following tag to determine the interface language of an ASP.NET website.

<globalization
enableClientBasedCulture="true"
culture="auto:en-GB"
uiCulture="auto:en"/>

This works as expected: Client wo request a specific localisation get it, everybody else is happily looking at the en-GB settings

View 2 Replies

Setting The ExecutionTimeout Element In Applications Web.config

Jun 23, 2010

I'm having some trouble setting the ExecutionTimeout element in my applications web.config. My page is making a lengthy webservice call and times out after 110 seconds. (the default I believe). I set the value to 220, and make sure the compilation debug=false.

Does the compilation setting refer to when IIS/ASP.net compiles the ASPX pages when a client requests them, or does it refer to the visual studio compile process there the assemblies are created. Would using an assembly built using debug in visual studio still allow the above settings to work?

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved