I'm trying to build a horizontal DataList that, when enough items are added, will start scrolling.
Here's my pertinent layout code:
[Code]....
I *thought* I had everything setup properly but here's what happens when more & more items are added. Notice that eventually each item just starts shrinking in width. I would have though that the 110px width specifier in the CSS Class would have fixed the width accordingly.
I'm using a DataList to display photos in a TabSheet. The problem I get is that the div seems to get wider based on the # of pictures even though the pictures are not displayed and a scrollbar is.
[Code]....
I can't figure out what is causing this issue.
I have a datalist with repeat column=4 and repeat direction = horizontal.
I want once it display 4 items it should display separater( line or horizontal rural hr tag ).and then again display 4 columns.
i have a datalist in my aspx like this:
<asp:DataList
ID="dlSubs"
runat="server"
CellPadding="0"
CellSpacing="5"
RepeatDirection="Vertical">...</asp:Datalist>
when i do this in the code-behind:
this.dlSubs.DataSource = dtCat; // dtCat is a datatable with about 13 rows
this.dlSubs.DataBind();
everything gets rendered in one column (vertical) but i want two colums... so i do this:
DataTable dtCat = shop.DAL.ArtikelenDB.GetLeftMenu(Convert.ToInt32(Request.QueryString.Get("catg")));
double tmpDouble = (double)dtCat.Rows.Count / 2.0;
double repRow = Math.Ceiling(tmpDouble);
dlSubs.RepeatColumns = Convert.ToInt32(repRow);
dlSubs.RepeatDirection = RepeatDirection.Vertical; // also tried without this line...
this.dlSubs.DataSource = dtCat;
this.dlSubs.DataBind();
but when i do the above. it gets rendered horizontally... how is that possible?
I have a datalist within a table and it scrolls horizontally. The data is set up to progress from past to future. By default the page loads with the table scrolled all the way to the left, and therefore displaying data which is furthest in the past. I would prefer for the table to load with the scroll bar in the middle, so that data at the split between past and future is displayed and the user can go further each way as he desires. how to set the focus within the table to let my datalist load exactly where I want it?
View 14 RepliesIn the below written code content is render vertically and in one coulmn only.
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Untitled Page</title>......
I want to build a User Control with a Datalist and implement paging in it.
View 9 Repliesi want to write a page contain an datalist and several ObjectDataSource. The datalist will chose ObjectDataSource according to QuerryString passed to that page.
My idea is like:
[Code]....
I searched and read [URL]
I have a selection list that is generated dynamically, it lists a number of checkboxes that are based on an end-user editable table, as such I have no idea what data, or how much, might be contained in this table and how many checkboxes or what they might contain, other than the primary keys of the table. The user will select the checks they wish to see, and then control is passed to another page via PostBackUrl. The second page has to figure out which records to show (build it's where clause) based on the checkboxes checked in the previous page.
So, my problem is several-fold. First, asp:CheckBoxes don't have values. This can be worked around by a number of methods. Right now, i'm using a placeholder and dynamically creating the checkboxes in the ItemDataBound event of the DataList. I set the ID to "CheckboxKey1Key2" (where Key1 and Key2 are the primary keys of the check items). Second, I have to walk through the controls of the PreviousPage to dig out all these values. That in itself is also a pain, but doable. Now, my thinking is to build the where clause of my Linq2Sql query based on the keys I got from decoding the checked checkbox names. This all seems like a lot of jumping through hoops for something that shouldn't be this difficult. Am I missing something? Does anyone have any better solutions?
I have a question regarding a situation that occurs with GridView, ObjectDataSource in ASP .NET application. The GridView is linked to the ObjectDataSource and both are included within an UpdatePanel letting the GridView to fill in an asynchronous way from a form in the same page so it gets more rows as the user enters the data:
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<asp:UpdatePanel ID="UpdatePanel1" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False"
DataSourceID="ObjectDataSource1">
<Columns>
<asp:BoundField DataField="Name" HeaderText="Name" ReadOnly="True"
SortExpression="Name" />
<asp:BoundField DataField="Periodicty" HeaderText="Periodicty" ReadOnly="True"
SortExpression="Periodicty" />
</Columns>
</asp:GridView>
<asp:ObjectDataSource ID="ObjectDataSource1" runat="server"
SelectMethod="GetSessionNames" TypeName="Simulation"></asp:ObjectDataSource>
<asp:Label ID="Label27" runat="server" Text="Label"></asp:Label>
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger ControlID="NewWebSessionButton" EventName="Click" />
</Triggers>
</asp:UpdatePanel>
I start the project with Visual Studio 2008, fill the form and it works correctly. Then I stop the execution: rerun again and the data I entered in the previous run is in the GridView. Is like some sort of cache saved the data from the session before. I checked that EnableCaching property is set to false for the ObjectDataSource. If I Rebuild Web Site in Visual Studio (not just Build) then it works corretly leaving the GridView empty. Is this caused just becuase of Visual Studio? Can it be turned off? And will it happen in the final IIS it will run on?
I want to build a survey system where you can build a form with questions and some answers to these questions and then members who will log in will be able to take the test.
Then i want to present the different results from the test in some diagram or something like that.
It may be obvious to everyone. I am learning this: what is difference between build solution and build website
View 2 RepliesI have a large solution which has multiple apps which all share some common site elements (masterpages, navigation, etc).
Currently, all of these get built into a single DLL
If my structure looks like:
WebRoot
- Common/
- Shared/
- Images/
- App1/
- App2/
- etc
Is there a build tool which will allow me to build WebRoot.dll, App1.dll, App2.dll? I don't believe this is possible in VS2008 or the MSBuild tool.
I have a TFS build set up to deploy an ASP.net project to a test server.The build works great, and deploys to the test server fine, but instead of putting it into the Website directory that my IIS webserver is configured for, it puts the build into Website_20100511.6
Why is the date suffixed to the directory name? Is there a way to turn that off so I can publish directly to the Website?
I need to build web application that will do:1 - build web pages. 1a - build template for page. 2 - add module(by module I mean ContacUs form, Search, Billing System...). Each module can be constructed by submodules or diveded to submodules 2a - build module(add form, textbox, button...) and that all
entered data by user could be saved in dbCan you advise me a DB structure that will contain it allI looked some cms db, but it's NOT this. Please, don't ask why I mess with it. I just need to build it.
In Datalist Item Template Another Datalist And Child Datalist How can we access link button inside chile datalist when click in child link button
View 1 RepliesHere is my code through which i can generate dynamically 2 checkbox group
DataTable dt = new DataTable();
DataList1.DataSource = dt;
DataList1.DataBind();
DataList2.DataSource = dt;
DataList2.DataBind();
Design Page
[code]....
There is two checkbox group which have same datasource, so in both case same checkbox are showing and also same event is firing for both. Here is the event code
protected void CheckBox_CheckedChanged(object sender, EventArgs e)
{
string OpService = ((CheckBox)sender).Text;
}
Now what i want to do is, while check one checkbox from the 1st checkbox group the same checkbox should be selected from the second checkbox group automatically, also if i deselect one checkbox that should be deselect from both checkbox group.
Am building a Form for out intranet that runs on ASP.NET and C#, it is to be a survey from a SQL database. I have the connections setup can pull informations/Questions from the database. I am having a problem with setting up radio buttons within a datalist, ive never done this and i know they require unque names.
It is to be 4 radio buttons per question where only one can be select, i know how to group just not via a datalist with unique names
How can I do paging with datalist if that datalist is populated with inputs coming from a querystring?
View 3 RepliesI have following datalist ,to display employee id, name, email ..... datalist have column with link button text " Get Details" and fontcolor "black" , onmouseover of the particular row i want change the color of linkbutton or the image of linkbutton ..
<asp:DataList ID="DataList1" runat="server" BorderWidth="1px" CellPadding="1"DataKeyField="EMPID"
GridLines="Both" RepeatColumns="4" RepeatDirection="Horizontal"><ItemTemplate><table border="0" id="thistable" runat="server" style="width:100%;height:100%"> <tr> <td> EMPID:
<asp:Label ID="EMPIDLabel" runat="server" Text='<%# Eval("EMPID") %>'>
[code]...
How To get Datalist Checkbox Select Item To The Another Datalist on click CheckBox
Code Like
<form id="form1" runat="server">
<div>
<h2 style="background-color: #CCC; font-size: 16px; font-family: Arial, Helvetica, sans-serif; font-weight: 400;" class="heading">Brand</h2>
<asp:DataList ID="DataList5" runat="server" Style="font-weight: 700; color: #CC33FF; background-color: #66FFCC;" Height="100px" Width="122px">
<ItemTemplate>
[code]....
I need to find which Selected Key value that was selected in the ChildDatalist inside the MainDatalist
this is my Html code...for the MainDataList and the nested Childdatalist
[Code]....
I am trying to place a datalist inside datalist. I managed to place a datalist inside gridview but not datalist inside datalist.
Below is the code I am using to bind the datalist into the master gridview, I am trying to change this code in such way it will be right for datalist inside datalist but so far I did not succeed.
[Code]....
i have a datalist . that is contains 7 columns in repeat layout .when i have more from 7 columns , datalist style is normal .but when i have smaller than 7 columns ! data list style is not normal,
because there are some empty columns without specific schema.
How i can make a datalist > when i have 1 columns in my datalist my first layout width be 100% ;
and dont show some empty layout ?
I have following code
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="GuestBookPage.aspx.cs" Inherits="GuestBook.GuestBookPage" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
[code]....
I wanted to get label control when button is clicked i.e button1
