Unhooking Event Handlers Needed In To Prevent Memory Leaks?
Feb 17, 2011
Coming from WinForms/WPF I've learned the hard way that not remembering to unhook event handlers can lead to memory leaks.
Does this apply to Webapps too? It seems like when the request ends, everything (non-static) should be eligible for garbage collection. Is that true?
I remember jumping through all sorts of hoops to ensure that events got unhooked when an object goes out of scope, especially with multi-threading going on to ensure a responsive UI. Is all of that still necessarily in a webapp or is that one of the luxuries of working with a (mostly) RESTful model?
View 1 Replies
Similar Messages:
Feb 5, 2010
I have an ASP.net application with c# which uses MS SQL server 2005. I find that the cpu usage of my server reaches 100% when ever i run the application. I was told that i may have memory leak in my application. How can i trace is there are any memory leaks in my application? Note: I am not the programmer of this application. But i have the complete source code as i am doing maintenance and enhancements on this application.
View 1 Replies
Feb 14, 2011
My web application is of large size and its performnacne is very slow,
now i want to check the memory leaks, are there any third party tools or built in add in in VS 2010 ,
i tried using ANTS profiler but it supports only .net framerok 2.0, my project in built in framework 4.0
how can i detect memory leaks
View 6 Replies
Oct 11, 2010
After researching why a page I have using an UpdatePanel to perform a refresh every 15 seconds was using up piles and piles of memory over time, I discovered that this is a "well-known" issue with the UpdatePanel not cleaning up properly in IE (some issue with reference counting in COM interop or some such). UpdatePanel does not seem to have this issue in Firefox (haven't confirmed the issue in other browsers).If this is a "well-known" issue, two questions:Is there a "well-known" workaround to this? I know that a full-page refresh will cause the memory to be cleaned up, but some pages may be up for a long time and I don't want to interrupt any user interaction with the page that may be going on. I will if it is required, but it is a sloppy, sloppy UI kluge... you know, one of those "as a self-respecting coder I hang my head in shame at what I have wrought" kind of kluges.Is there any effort being made to fix this? I've looked about, however, most articles on this do not make mention of even MS acknowledging bug status for this while I've seen many telling me why this is an issue, and how it's a "design" thing. I hear IE9 is supposed to take care of this... I guess what you'd call a non-issue, but it will only be available to Windows 7 users.
View 2 Replies
Nov 14, 2010
The application pool randomly shuts down. I am assuming this is due to Rapid Fail Protection and errors are occuring that are triggering it. However... there are no errors being reported in the event logs. So my next inclination is to think of the possibilities of a memory leak. How do you test for memory leaks on a website running locally?
View 2 Replies
Feb 15, 2011
Can anyone clarify to me the difference between the following:
1.
{
// ...
Button b = new Button();
b.Click += new RoutedEventHandler(b_Click);
}
void b_Click(object sender, RoutedEventArgs e) { //do stuff...... }
2.
{
// ...
Button b = new Button();
b.Click += a_Click;
}
void a_Click(object sender, RoutedEventArgs e) { //do stuff...... }
View 1 Replies
Mar 26, 2010
I'm curious about the pros and cons when subscribing to event handlers.
<asp:DropDownList id="DropDownList1" runat="server" OnSelectedIndexChanged="DropDownList1_SelectedIndexChanged" />
vs
protected void Page_Init(object sender, EventArgs e)[code]...
View 2 Replies
Jul 8, 2010
VS 2008 - create event handlers in C#? but i cant get this:
View 19 Replies
Apr 1, 2010
I've been programming ASP.NET for a number of years and have got into the habit of using the public access modifier when writing event handlers for nested controls. e.g.
LinkButton ln = new LinkButton();
ln.Click += new EventHandler(LinkClick);
....
public void LinkClick(object sender, EventArgs e)
I think I started using public because I ran into errors when using other modifiers. Is this the correct one to use here? Does it depend whether you're writing a Page / UserControl / other?
View 4 Replies
Jan 10, 2010
I want to add event handlers programmatically to the server controls rather than using their predefined OnClick properties, etc. But which would be considered a better practice for defining handlers:
Define them in Page_Init
Define them in Page_Load
View 1 Replies
Nov 3, 2010
I am making an application in which i use button images instead of button control in web forms.
So, How can i access event handler through this image link ?
Ex.: For Button Control, there si a event handler called button_Click().
So. Just by pressing button control, i can access this event handler.
I want to achive this by clicking on link i.e <a> anchor tag.
View 3 Replies
Sep 14, 2010
I've been working on a web form that has lost it's ability to respond to most event handlers, though code that I write in Page_Load still fires. No button click or text changed events will fire. This has been working for months, and suddenly stopped. I did a windiff comparison to an older version of the webform, and don't see anything suspicious.
View 4 Replies
Nov 18, 2010
I am creating a hierarchial grid dynamically. I was able to add a gridview within a gridview. Now how can I create the gridview's rowcreated event handler programatically? I need it to be dynamic, depending on the number of levels of hierarchy I will add gridviews and their events. How can I do it?
the event names will be dynamic like GridView*_RowCreated.. where * will replace by a number of gridviews.
View 2 Replies
Mar 17, 2010
I'm having a hard time understanding why the following code doesn't work. I'm sure it's something remedial that I'm missing or not understanding. I currently have a page that asks for user input. If, based on the input and logged in user, I find data from this page already in the database, I need to update the existing records rather than creating new ones, so I set a class-level bool to true. The problem is, when MyNextButton is clicked, PreviouslySubmitted is still false. So, I'm not sure how to make the value of this variable persist.
public partial class MyForm : System.Web.UI.Page
{
private bool PreviouslySubmitted;
protected void Page_Load(object sender, EventArgs e)
{
MyButton.Click +=
(o, i) =>
{
q = from a in db.TableA
where (a.SomeField == SomeValue)
select a;
if(q.Any())
{
PreviouslySubmitted = true;
//populate the form's fields with values from database for user to revise
}
}
MyNextButton.Click +=
(o, i) =>
{
//the value of PreviouslySubmitted is false at this point,
//even if I made sure it was set to true the previous postback
if(PreviouslySubmitted)
{
//update database
}
else
{
//insert into database
}
}
View 2 Replies
Nov 9, 2010
let me know "Is there any method to check whether a control was attached with any Event Handlers or not"?
View 3 Replies
Mar 22, 2010
reading on the forums about assigning event handlers to controls that are dynamically created via code and am just not getting anywhere.In my particular case, I'm rolling through a directory of images and creating ImageButton controls on the fly and want to assign the OnCommand event to a single handler.Then, by using the CommandName (which is different for each control) I can figure out which ImageButton was clicked and act accordingly.
The snippet below (which can be found in many posts on this topic) is inside a foreach which loops through the directory and gets each FileInfo (fi).Each is then added to a PlaceHolder (phImages).
[Code]...
This code compiles and runs but the event handler is never invoked when an ImageButton is clicked. I believe this is because you cannot, without some coding I'm not familiar enough to do yet, assign a handler to multiple controls.I say this because I ran into a similar problem in a Silverlight app I wrote and had to use a lambda (=>) operator to do something similar (although I admit to not knowing enough about this to know if this situation is the same).
View 5 Replies
Jan 24, 2016
Is it mandatory to pass the Success and Failure method names as parameters while calling server side methods using PageMethods in client script.
I referred to article [URL] ....
View 1 Replies
Nov 24, 2010
The textbox has an onblur event (the workings of the onblur event are irrelevant), and an associated RequiredFieldValidator. This code functions exactly as it should. However,if in the body onload event I simply raise an alert of the innerHTML of tr1 or td1, the onblur event does not appear (but it does work, and can be seen when I view source in IE7). If I remove the RequiredFieldValidator, the onblur event handler is shown in the alert, or if I retain the validator but change onblur to onfocus, then the event handler also appears in the alert. I need this to work as when the user increases the Quantity, duplicates of the table row are added (I have tried both cloneNode, and setting the innerHTML of each new table cell to that of the original, but as my alert proves, the onblur event handler is not included in what is copied). The same problem also occurs with onchange for select tags with validators. I am using Visual Studio 2008 (.Net
2), IE7 and IIS 7.
[Code]....
View 7 Replies
Nov 1, 2010
Inside VS2010 is there a way of auto generating page level event handler code?
View 2 Replies
Mar 3, 2011
I am getting the following error
'Event handlers can only be bound to HttpApplication events during IHttpModule initialization.' at the following code (line in bold or double **)
protected void Application_BeginRequest(object sender, EventArgs e)
{
HttpApplication app = (HttpApplication)sender;
**app.EndRequest += new EventHandler(Application_EndRequest);**
}
protected void Application_EndRequest(object sender, EventArgs e)
{
UnitOfWork.Commit();
}
which is mentioned in Global.asax file.
View 2 Replies
Jan 20, 2011
ASP.NET says that the following ImageButton server tag is not well formed:
<asp:TableCell VerticalAlign="Top">
<asp:ImageButton runat="server" ID="imgAdd" src="Images/add_plus_1.gif"
onmouseout="this.src='Images/add_plus_1.gif'"[code]....
I think all the mouse event attributes are legit, so I don't know what it's complaining about.
View 2 Replies
Jul 15, 2010
I have a situation where I dynamically load one of twenty user controls at a time in an ASP.net web page. Based on much reading I've done, I understand that I am to reload the user control upon postback via the Page_Init event handler. This I've done and it seems to work fine.
But now I would like to wire up assorted controls in the user controls such that when the value of each is changed, an event is fired and the web page is notified. Here's an example of how I'm doing that:
userControl.NewData_Handler += new EventHandler(UserControl_NewData_Handler);
There's a problem though. Because the user control is being done in Page_Init (ie. before Page_Load) I don't believe that a line of code such as the one above can function yet.
So I'm wondering what the best practice to do this is. It occurred to me that perhaps I could execute the line in the Page_Load event handler but I'm not sure if that's correct or not.
View 2 Replies
Jun 30, 2010
I was wondering if anyone had an easy way to wire up javascript event handlers to events happening on the server-side. I have a long running process that includes a lot of steps, and would like the client to be continually updated with new information as the steps transition. Will this involve some sort of polling mechanism?
View 3 Replies
Apr 27, 2010
I have two list boxes and I am using javascript to interchange the items. My problem is, When I press submit button before any changes in the listboxes, it would fire the eventhandler. But when I made any change in these listboxes, a postback happened and the controls became invisible. (There is an html tag and an empty body tag in the source). I know listbox cannot preserve the client side changes to the server. But I could not identify the problem.
View 3 Replies
Jul 1, 2013
I have a ASP.NET content page where the master page is set dynamically. Both master pages contain a print button and an associated event handler for the click event of the button. Unfortunately I receive a run-time error when I attempt to dynamically access the event from the master page that was not initially assigned. Below are code snippets:
Page_Load():
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim strPageTitle As String = "Evaluator Data Form - Instructions"
If Page.MasterPageFile.Contains("masEvaluators.master") Then
Dim mp As Evaluators_masEvaluators = CType(Me.Master, Evaluators_masEvaluators)
[code]....
which produces the following error when I load the page and reference the "masStaff.master" master page:
System.InvalidCastException: Unable to cast object of type 'ASP.staff_masstaff_master' to type 'Evaluators_masEvaluators'. at Evaluators_EDF_Instructions.Page_Load....
I can solve the problem by adding a print button to the content page, but that defeats the purpose of using a master page.
View 1 Replies
