I am working on developing a .net application with c#. I have a remote DB server with sql server 2008. I have a process (exe) that writes to several tables including MSH table. I have anr sproc that updates message id in the MSH table. The update sproc is fired after the write process. When I put some break points in my code and run it through the debugger, the update srpoc always updates the record in the MSH table amd looks like everything is working fine. But when I remove the breakpoints and just run the application, I find that the records are not updated.. I run through the debugger again with breakpoints and copy the update command and parameters to test it running directly on sql server management studio query window, it works. No exceptions thrown, but update sproc does not work without the debugger with breakpoints on. Any clues what I should be looking for to troubleshoot?
i have in asp.net a few textboxes and i wish to update my database with the values that they encapsulate. The problem is that it doesn't work and although it doesn't work, the syntax seems correct and there are no errors present . Here is my linkbutton:
I have a button click event code block in which data should be updated to my database. After stepping through the code, the ExecuteNonQuery() executes, but no data in my database is changed. I don't think there is a problem with my code although I will include it just-in-case.
[Code]....
I'm confident that my command text and my parameter adding is correct.
I am getting the following error when I try to update my record in a GridView. I am using a DataObjectSource and its grabbing the update from a DAL. This is the error:Index (zero based) must be greater than or equal to zero and less than the size of the argument list.This is my code where it says the error is:
I have a stored procedure which works with a temp table, and a regular sql server permanent table.en I perform an update in the stored procedure on my permanent table or temp table, the update doesnot occur? If I just manually execute the udpate code (Lines 19&20) then the update will occur. However it does not occur in my stored procedure when I execute it from my C#. The other sql will execute but not the update?
The users of my webapplication are validated using database connection. This requires each user is a sql server database user. While logging their validity is checking by trying to create a connection using userid and password entered by the user. If connection opens successfully, it is a valid user. I also have a page in application to change the password, where sp_password is used to updated database password.
string connectionString = ConfigurationManager.AppSettings["DBServerName"]; //try to create a new connection dynamically using user id and password connectionString = connectionString + User ID=" + userId + ";Password=" + password; using (SqlConnection connection = new SqlConnection(connectionString)) { connection.Open(); }
The problem is after i change password, and logout and try to login, i am able to login using old passwd also. The line of code which creates and open connection succeeds with both old and new password. If i stop and run the application again this works.
the site normally works fine in all popular browsers including firefox, chrome, safari and ie.
but doesn't work in ie 8 when it's redirected via a proxy server and it gives an error saying
"Message: Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near 'DOCTYPE html PUB'."
I have a login control that is working beautifully on my localhost, but not working on the server. It validates my username & password - and gives me an error if I enter an invalid username/password. However, if I enter the correct username/password, the page refreshes, but does not redirect me to the "ReturnUrl" that I see in the URL. I've seen posts on this, but nothing that I tried worked. I've tried setting the 'MembershipProvider'attribute of the login control. I don't want to set the DestinationUrl...I want it to take what is in the ReturnUrl in the querystring. I don't think it's a web.config issue cuz it works on localhost??
i made a after delete trigger on a table1 and in this trigger i insert the deleted data in another table name tab2.
when i execute the delete stored procedure of table1 from sql server 2005 then trigger working fine but when i execute delete stored procedure of table1 from c# then it is not working properly.
I have a function that checks for a username and if it finds the username it will allow the user to update the user, there are 3 main columns: Name,Age,isFemale. I have the enduser supply the information and then I try to update the record but I get a sql error for "not a valid" column.console app:
[Code]....
I pass the spIsFemale by using an enum, here is the Person Class with function. [Code]....
I get an error that column isFemale is not valid. The isFemale column is a bit type. If it's a 1, it's a female, if 0 male. this is more of a test area and I'm trying to update records or create new one's if the name does not exist.II am new to C # and I am just trying to learn new ideas and methods within C sharp.
I have a vb.net page that has an optional parameter. If a user enters data for that field, and clicks save, it saves fine via the stored procedure. HOWEVER, if the user changes their mind, and wants to erase the data they entered, they go to the text field, and delete the characters, and click save, but no matter what, the stored procedure will not save the fact that they erased the data (it won't set it back to NULL). If the user enters a space, the stored procedure will save the space, and if they enter different data, it will save the other data. I can't figure out how to get it back to letting them set it to Null? I think this is because it's an optional parameter, and the stored proc is used by several forms (Some of those forms do not include this parameter), but this form utilizes that optional paramater.
I have created a dynamic Robots.txt file for my application and I have created an redirect entry in my web config in the <system.web> section and it works perfectly in my development environment but once I uploaded the file to my server it does not work and gives me an error 404.Requested URLhttp://www.canadawelcome.ca:80/robots.txt
Physical Path E:webcanadawelc1htdocs obots.txt
This is what I have added to my system.web section
I have the query to retrieve selected record in textbox. How to use this query to update record: I want when I enter sumit in textbox1 and click submit button then the record with ID 1 will be updated to name sumit
Dim SQLData As New System.Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") Dim cmdSelect As New System.Data.SqlClient.SqlCommand("SELECT TOP 1 Name FROM Table1 Order by Id DESC", SQLData) SQLData.Open() Dim dtrReader As System.Data.SqlClient.SqlDataReader = cmdSelect.ExecuteReader() If dtrReader.HasRows Then While dtrReader.Read() TextBox1.Text = dtrReader("Name") End While Else Response.Write("No customer found for the supplied ID.") End If dtrReader.Close() SQLData.Close()
I'm writing an app in which user can register. While registering the one may choose several options and according to these regiester fields are visible or not and are required or not. I came up with an idea that all fields will be in in the updatePanel and when users changes registration options I would set visibility of these fields on the server side.
It works but incredibly slow and whats more on the FF I have the given error:
The state information is invalid for this page and might be corrupted
3 checkboxes with other fields are in the updatePanel
Each field is in dl tag with runat="server>
I had to do it like that cause for "required" option I simply add css class to this dl (need in in javascript validation. If field should be visible I set visible="false" for given dl and then that field for example FirstName with title and so on isn visible after postback.
Am I doing something wrong ? Why does it take so long (~4 min on localhost) and in firefox it doesnt really work (when I use debug I think that process completes without errors on ff, I dont understand that at all :)
If update Panel is so weak what would be other option to change visibility and adding required class to all dls. Logic is quite complicated and has to make query to DB so simple javascript would be quite tricky.
Oh and I'm using ASP.Net and cant upgrade on this project.
i m creating simple project i want to update data in same page at registration...i have code to show you which is not working plz help mepublic void update(string fname, string lname, string address, string emailid, Int64 phoneno ,string id)
cn = new SqlConnection(ConfigurationManager.ConnectionStrings["DatabaseConnectionString1"].ConnectionString); cmd = new SqlCommand(); cmd.Connection = cn; [code]...
provide the solution to the problem. must achieve the ajax type functionality for the controls of the page displayed within the iframe, the contents(button) withing the iframe are causing complete post back i have used update panel, script manger, on the main page and also on the pae displayed in the iframe even then post back occurs note i check this using the current time of day in the label. here are the codes.
I have added two update panels to my page. I'm trying to update the first panel but not the second. The second panel contains validation controls which seem to be kicking in no matter what I try.
I'm having a wired problem with Radgrid.. Im using a Radgrid to display some results where the user can edit/update/delete them. I'm using a single SQL Server 2000 table to fetch the results... Not sure why the events are not firing in radgrid. But I am able to do it successfully using the Gridview control... Im using .NET framework 4
I am working on an application where i have got, a content page within a Master Page. I have placed a gridview on the page. This gridview has three fields, one of them is TemplateFied, a BoundFiled and a CommandField, along with paging enabled in the gridview.
In the template field i am creating a dynamic javascript on RowDataBound.
I wanted to place this gridview in Update panel so that it doesnot re-loads when command is clicked or page is changed.
I placed a scriptmanager and an update panel, and placed the grid in it. Now my command field works only once and not more, and same is true for the javascript, it doesnt gets initilized.
I developed my application form in aspx page its such a huge form(6000 lines), I used update progress there for that updatepanel, But i cant able to see the update progress icon when i rendering the page.
I am using a detailsview to update a SQL database. When I click the "Update" button, my application does not update the table and I do not get an error.