i have some problem with my userControl. Pls look below for better understanding. Pic1. The default page. When i click on the links on the left, userControl will load into the placeHolder as in pic2. But when i click on the Clear button that is inside the userControl, instead of clearing the text in the textbox, it load back to the default page show in pic1. Can anyone pls advise me what went wrong?
View 9 RepliesI have a user control say SearchVendor.ascx which contains 4 buttons a gridview and another user control. I need to load the control dynamically actually as a modal pop up
I get this code
var uc = Page.LoadControl("~/blah/VendorProductSearch.ascx") as VPSearch;
uc.ShowVPSearch(true);
_tempPlaceHolder.Controls.Add(uc);
it works fine the control gets loaded properly but onclick of any button the second time the control disappears ?
I want the dynamically added control to remain until the user clicks on the cancel button
I have a custom ascx user control on my page that includes a dropdownlist. There is an onSelectedIndexChanged event handler that is connected to this dropdownlist. The first time the user selects a value, the page does a postback and the logic executes correctly. However, if the user then goes to change their selection, the event handler does not get triggered.
View 3 RepliesOn my master page , I have "Search textbox" and "Search Button".On My content page , I have a "User Control" which has a "GridView".It shows some data about Vendors.Also, on this User Control's Page Load, i have code written to display all vendors in GridView.Now, when user enters Vendor Number in "Search textbox" , and hits "Search Button" , i want to handle this event inside my User Control.How to do this ?
View 2 RepliesOn my master page , I have "Search textbox" and "Search Button".
On My content page , I have a "User Control" which has a "GridView".It shows some data about Vendors.
Also, on this User Control's Page Load, i have code written to display all vendors in GridView.
Now, when user enters Vendor Number in "Search textbox" , and hits "Search Button" , i want to handle this event inside my User Control.
How to do this ?
I am trying to catch an event that is in a user control inside a master page contentholder and refresh the content page. I am having a hard time finding a good example. Even on this site I am timing out on search.
View 3 RepliesI have a custom control which contains (amongst other things) an imageButton.
I'm adding a handler to the "click" event of the imageButton however when the button is clicked the handler routine is not called. where I am going wrong with this? should I be handling the click event in some other way?
here is my code:
[code]....
one is anchor tag and other asp linkbutton tag
we want to call user defined function on onclick of anchor tag and as well as linkbutton
is it possible?
I am creating a webform in which I am having two radio buttons (Yes/No), one textbox, and two lables.
I want to enable and disable the textbox on radio button click Yes and No respectively.
I want to use custom server control for this whole process as we have to use this DLL in other application also.
Being as beginner I got just confused about event handling methods for server controls.
I have a User Control which consists of a TextBox with a few extras, but for purposes of this example just assuming it's a plain TextBox will be sufficient. I am calling this User Control from a Web Form and would like to be able to use a RequiredFieldValidator that basically would function the same as if I used it on a TextBox on the web form. How do I configure my User Control to handle this?
EDIT:
DatePicker.ascx
<asp:TextBox runat="server" ID="myControlTB">
DatePicker.ascx.cs
[ValidationProperty("Text")]
public partial class DatePicker : System.Web.UI.UserControl
[code]...
I have a user control which I am dynamically loading in my page_load event via a method (see below). The user control contains a gridview and a label. A key piece of information has to do with how to get around the convenient feature of gridviews not rendering when their datasource is empty. In my user control I add some hidden rows so that the grids will render and the user can see just the headers (if the situation calls for it).
The nomControl is an asp:Panel on the parent page which will hold the user controls. The dsRefinedProductsNomInfo is a strongly typed dataset.
[code]....
how I should be handling my events so that my rendered grid is up to date and not showing these hidden rows. I have a feeling I am just doing things in the wrong place/order but this is my first real swim in the deep end of the asp.net pool.
I am part of a team that is developing a SharePoint web part. My task is to create a user control which will ultimately be wrapped in another class for presentation in a web part. Because of these requirements, I must fit all of my code in a single user control.To organize my code in the code-behind, I created a few private classes for the different objects which are represented in the database. I want to add some exception handling whereby if some sort of DB exception is thrown I can update a message on the page informing the user of the problem.
My problem is that the page-level controls are inaccessible from the private class where I'm issuing the query, so even if I catch the exception I have no way of directly accessing a Label control to populate the error. I tried to create a baseclass with an EventHandler defined, but when I throw events from the private class I'm not able to catch them for whatever reason. I'm far from an OOP expert Here is a snippet:
ASP Code:
using System;
using System.Collections;
[code]....
I want to save widths of all my gridview columns in cookies on unloading the page.
how to handle page unload event from a user control, as my gridview is in a user control?
I have a user control called ucTriStateButton. It raises an event when it is clicked, called TriStateButtonClicked. If I put this user control on a page, it works fine. Here is the declaration on the .aspx page:
[Code]....
When the button is clicked the method tsbTest_TriStateButtonClicked executes correctly.
The problem is when I put the user control in template field of a GridView.
[Code]....
There is no way to hook the event handler to the control in Page_Load because I cannot get a reference to tsbMorning. So I did it in the RowDataBound event handler of the GridView, where I also do a bunch of other row-specific stuff. Although this builds and runs, the event is never actually subscribed to and so never gets fired.
So the question is - how can I handle an event from many instances of the same user control within a GridView? I am calling the same bit of code regardless of which user control is actually clicked. I only need to know that one was clicked.
Using vb.net/asp.net 2005.
I have a page books.aspx that has a control named authors.ascx.
Inside the authors control there is a "select" button I want to add some kind of listener or event handler (not sure of the correct terminology) so on the parent page (books.aspx) I can respond to the "select" button being clicked.
I have to pass the authorID from the user control to the parent page.
In my authors.ascx control I just created this event:
[Code]....
Now I need to write the function for SelectAuthorBtnClick and I think add some kind of listener in the parent page to listen and handle the event.
I have a gridview called gvResults. In the gvResults_RowEditing event I add a row below the one selected. In that new row, which spans all columns, I insert a user-control. There are two buttons and some textboxes in the user control.
My problem is that when I click one of the user-control buttons it never gets to the button event handler, I think because the user control is not recreated on the page postback. How can I have the user-control events fire before the parent page events fire?
I tried using an update panel, but I still get the parent posting back before the user-control events.
Is there any way for one user control to raise an event that is handled by another user control without going through the page? I am using Umbraco and do not have access to the page object.
--Edit--
Umbraco has the idea of Macro's (user controls) that it loads into pages. I can't access the page directly as this is part of the framework.
There is a publish subscribe (pubsub) pattern that I know would fit my needs well (2 user controls that need to talk to each other) but am unsure how to hook it up in ASP.Net without the page object.
I have a webdayview control (Infragistics proprietary ASP.net control) on my page. On the aspx source I've inserted some javascript (webdayview_click - clientside click event) that calls a webmethod in the codebehind. This seems to work fine, but when I
insert this webdayview control into a user control and move the corresponding javascript into the aspx of the user control, it doesn't work. I can't even insert a breakpoint into the javascript function to debug it. Is there a way to make it work? I want to enable the click event of the webdayview control so that when I click on it, the javascript function calls the webmethod. Here's my code (remember it is inside a user control):
[code]...
I posted this question on the Infragistics forum but didn't get any replies. Hopefully I'll get some here. :)
Im new to MVC. How controls events are handled in MVC (like Textbox_textChanged event in MVC)
View 2 Replieswhy delegates are using in event handling?what is the advantages of using delegates in event handling?
View 4 RepliesAccording toMSDN[URL]Postback event handling:If the request is a postback, control event handlers are called. After that, the Validate method of all validator controls is called, which sets the IsValid property of individual validator controls and of the page."It is my understanding that the Validate method of the validtor controls is called after Load but before the control event handlers.The text quoted says its after the control event handlers.
View 1 RepliesAs I am new to .NET framework.I have a doubt in Event handling. For example to handle a button click we write a delegate as private void button1_Click(object sender, EventArgs e)In this function I can change the sender object value means I can do what ever I want to do with Button object.Why this is implemented in this way in Framework.Is this good to do so.
View 1 Replieshow ASP.NET handles page postback and events?
View 4 RepliesIn one of my ASP.NET webform application I want create dynamic controls and add Event handlers for those dynamic controls..For example when I click a button I want to display a list box and I want to add
SelectedIndexChanged event for that list box.I have errors in doing this... Here's the code I tried out... I think there are errors due to my lack of knowledge in postback
[Code]....
[Code]....
DLabel is a existing label control...*** When I click the button I get the ListBox... When I select the Item 1 the page reloads and nothing is displayed in the Label.
i should handle a event whn my focus chages from one text box to other....[ i should get an error as you are not entered the data(it should accept only numbers) ]
View 10 Replies